Open side-bar Menu
 ArchShowcase

Archive for the ‘Autodesk’ Category

Liberty Lounge in Seoul, Korea by Simplex Architecture

Sunday, August 6th, 2017

Article source: Simplex Architecture

The site is located in an alley, a few blocks away from Dosandae-ro – a busy boulevard in Seoul’s Gangnam district. The area used to be a low-rise residential district in the past, but now rapidly transforming into a commercial district full of shops and restaurants. The existing building had a simple rectangular structure with a courtyard in the middle, using concrete blocks and blackened steel as a major finish material. The main interest in designing the building was to keep the existing materiality, yet to make enough alteration to accommodate the new program. The concrete block wall on the north was maintained in order to preserve the original materiality of the building, and the blackened steel was mainly used for the newly built walls.

Image Courtesy © Kyungsub Shin

  • Architects: Simplex Architecture
  • Project: Liberty Lounge
  • Location: 653-4, Shinsa-dong, Gangnam-gu, Seoul, Korea
  • Photography: Kyungsub Shin and Young Kim
  • Software used: RhinoAutoCad
  • Design Principals: Greg Chung Whan Park and  Sanghun Song
  • Visualization/ 3D: VIZE
  • Space Branding & Design: KMGD
  • Landscape Architect: Studio 101
  • Structural Engineer: Tomi Structure

(more…)

Impact Hub in Santa Barbara in California by Anacapa Architecture

Wednesday, August 2nd, 2017

Article source: Anacapa Architecture

We designed a dynamic, shared work environment located on Santa Barbara’s famous State Street, right in the heart of the entrepreneurial and non-profit community. We transformed a traditional, mission style building into an innovative, collaborative, impactful space for Santa Barbara’s insatiable start-up culture.

Image Courtesy © Anacapa Architecture

  • Architects: Anacapa Architecture
  • Project: Impact Hub
  • Location: Santa Barbara, California, USA
  • Software used: Autocad, Revit

(more…)

Outpost in Idaho by Olson Kundig

Wednesday, August 2nd, 2017

Article source: Olson Kundig 

Set in the remote, harsh high desert of Idaho, Outpost is an artist’s live/work studio and sculpture garden. The building’s compactness restricts site impact and reinforces the desire to be outside. This is a windy place, and the enclosed “paradise garden,” is separated from the wild landscape by thick masonry walls. The footprint of the house is the limit of intrusion into the land—a simple, clearly defined space. This structure exemplifies Kundig’s belief that the architect’s job is to create an experience of place.

Image Courtesy © Olson Kundig

  • Architects: Olson Kundig
  • Project: Outpost
  • Location: Idaho, USA
  • Software used: Autocad

(more…)

Studhorse in Washington by Olson Kundig

Thursday, July 27th, 2017

Article source: Olson Kundig

Set in the remote Methow Valley, Studhorse responds to the clients’ desire to experience and engage the surrounding environment throughout all four seasons. Referencing the tradition of circling wagons, the buildings—four small, unattached structures—are scattered around a central courtyard and pool. The 20-acre site is nestled in the northern portion of the 60 mile long glacial valley and the buildings are arranged to frame carefully composed views of the surrounding Studhorse Ridge and Pearrygin Lake.

Image Courtesy © Olson Kundig

  • Architects: Olson Kundig
  • Project: Studhorse
  • Location: Washington, USA
  • Software used: Revit

(more…)

House for 4 Generations in Tokyo, Japan by tomomi kito architect & associates

Sunday, July 23rd, 2017

Article source: tomomi kito architect & associates 

This is an interior renovation project of an existing two-story timber structure house in Tokyo built approximately 40 years ago.

The client is a young couple, and the wife’s parents were living there before the renovation. The client decided to live with their parents in this house. Soon after, the wife’s grandmother who lives alone in the countryside – far from Tokyo – also decided to live together in this house. As such, the client requested to renovate the house suitable for accommodating 4 generations – the grandmother (1st generation), parents (2nd generation), the client (3rd generation), the client’s son (4th generation).

Image Courtesy © satoshi shigeta

  • Architects: tomomi kito architect & associates (Tomomi Kito)
  • Project: House for 4 Generations
  • Location: Tokyo, Japan
  • Photography: satoshi shigeta
  • Software used: Vectorworks, Autocad
  • Structural designer: Building Structure Institute
  • Technical advisor: Yutaka Misawa
  • Lighting advisor: Kanae Hagiwara
  • Completion: April 2017

(more…)

Backyard House in Queensland, Australia by Joe Adsett Architects

Friday, July 21st, 2017

Article source: Joe Adsett Architects 

The ‘Great Australian Dream’ of owning a quarter acre block with a new house has become a distant memory in inner-city Brisbane, as parcels of land are shaved down repeatedly in a bid to densify the urban centre. Nestled within the urban streets of Teneriffe, a colonial Queenslander presented a charming frontage that concealed the potential for the Architect to utilise the vacant 300m2 backyard to design and build a new family home. The ‘Backyard House’ has been an opportunity to set a precedent for suburban infill development as an alternative to the prevailing trend of building apartments near railway and bus stations.

Natural materials were utilised across the elongated front elevation, Image Courtesy © Joe Adsett Architects

  • Architects: Joe Adsett Architects (Joe Adsett)
  • Project: Backyard House
  • Location: Teneriffe, Queensland, Australia 4005
  • Software used: Autodesk Revit + 3DS MAX (rendering)
  • Landscape Architect: Brisbane Landscape Architect, Beau Hilliar AILA, cactus & HILL Landscape Architecture
  • Area: 300m2
  • Completed: Late 2014

(more…)

City and Nature Master Garden in Xi’an, China by Martha Schwartz Partners

Sunday, July 16th, 2017

Article source: Martha Schwartz Partners

Martha Schwartz Partners was one of nine international landscape design firms to be invited to design a small master garden installation on the theme of “the harmonious co-existence of nature and the city” at the 2011 International Horticulture Exhibition in Xi’an, China. The owner’s brief specified that the designer should consider the limitations of local building materials and methods, and that the garden should be accessible to a Chinese point of view.

Image Courtesy © Martha Schwartz Partners

  • Architects: Martha Schwartz Partners
  • Project: City and Nature Master Garden
  • Location: Xi’an, China
  • Software used: Autocad, SketchUp

(more…)

Residential Magnification in São Paulo, Brazil by Rogerio Gama Arquitetura

Sunday, July 16th, 2017

Article source: Rogerio Gama Arquitetura

Project located in the city of Piratininga, state of São Paulo – Brazil, in the residential condominium Vale Florido.

The project consists of an extension with 228m2.

600m2 Total.

Being a room with a suite, a service area; And a bathroom.

Image Courtesy © Rogerio Gama Arquitetura

  • Architects: Rogerio Gama Arquitetura
  • Project: Residential Magnification
  • Location: São Paulo, Brazil
  • Software used: Revit, Autocad, SketchUp + Vray
  • Year of construction: 2013

(more…)

The Sales Center of Capital Visionary Residence in Beijing, China by W. Design

Sunday, July 16th, 2017

Article source: W. Design 

Western Hills in the western part of Beijing where the Old Summer Palace is located—is far from the hustle and bustle of the city. This project’s design is a combination of cultural elements of Western Hills and modern oriental design techniques. A shaded corridor leads to a space possessing a fantastic view. The moment people enter the space, they feel as if they have walked into a beautiful painting that features both ancient elegance and modern freedom. “Let me forget my worldly worries and find peace in the woods of the Western Hills; the white clouds seem to have read my mind, and drift slowly down from the forest to keep me company.”

Image Courtesy © Ben Wu, Fang Ze, Sui Sicong

  • Architects: W. Design
  • Project: The Sales Center of Capital Visionary Residence
  • Location: Beijing, China
  • Photography: Ben Wu, Fang Ze, Sui Sicong
  • Area: 1911 square meters
  • Time of Completion: May 2016
  • Software used: Autodesk CAD / 3D MAX, Photoshop

(more…)

House Paes in Minas Gerais, Brazil by Marcos Franchini

Friday, July 14th, 2017

Article source: Marcos Franchini

After the development of some alternative occupation to the terrain started in mid-2013, the architectural program is reviewed and discussed in order to effectively meet the wishes of the couple who today make this house their home.

Image Courtesy © Gabriel Castro / Reverbo

  • Architects: Marcos Franchini
  • Project: House Paes
  • Location: 1272, Buganvilias Street – Nova Lima – Minas Gerais / Brazil
  • Photography: Gabriel Castro / Reverbo
  • Software used: Autocad, SketchUp, Kerkythea, 
  • Team: Collaboration: Gabriel Nardelli
  • Landscape design: Elcy Luna Celani
  • Light design: Poliane Jacob (technical team from Othon de Carvalho)
  • Structural design : N Engenhaira

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley:YII2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise