Open side-bar Menu
 ArchShowcase

Archive for the ‘Autodesk’ Category

PF single family house in Trento, Italy by burnazzi feltrin architetti

Friday, April 18th, 2014

Article source: burnazzi feltrin architetti 

The PF single family house, the remodeling and rebuilding of an already existing edifice, lies half way along the ridge below the medieval castle of Pergine Valsugana and it is located in an ideal position, both as to the beautiful view on the valley it enjoys and the sun exposure, excellent all year around.

Image Courtesy © Carlo Baroni

  • Architects: burnazzi feltrin architetti 
  • Project: PF single family house
  • Location: Trento, Italy
  • Photography: Carlo Baroni
  • Software used: Autocad
  • CLIENT: private
  • TEAM: Burnazzi Elisa arch., Feltrin Davide arch. and Pegoretti Paolo arch.
  • STRUCTURAL DESIGN: Roberto Svaldi ing.
  • HEATING SYSTEM: Giuliano Cattani ing
  • ELECTRICAL SYSTEM: Mirco Girardi  per. ind.
  • YEAR OF COMPLETION: 2009
  • TOTAL AREA: 430 m2 (only Enlargement)
  • CUBAGE: 1732 m3 (only Enlargement)

The Taichung City Cultural Center by SANE architecture

Friday, April 18th, 2014

Article source: SANE architecture

SANE architecture’s  project for the Taichung City Cultural Center has been awarded HIGHLY COMMENDED of the Cultural regeneration category at the 2014 MIPIM Architectural Review Future Project Awards.  The project was exhibited in the London Pavilion 10-14 march.

Image Courtesy © SANE architecture

  • Architects: SANE architecture
  • Project: The Taichung City Cultural Center
  • Photography: SANE architecture
  • Software used: 3DS MAX, Autocad and a bit of Photoshop
  • Year: 2013
  • Area: 45 000 sqm

Lingo Construction Services in Oklahoma City, OK by Elliott + Associates Architects

Tuesday, April 15th, 2014

Article source: Elliott + Associates Architects

Located in the historic Automobile Alley District of Oklahoma City the design seeks to transform an existing 1930 historic masonry and steel building into a modern office space. The character of the 12,000 sq. ft. two story building, originally built for Sharp Auto Supply Co, had been diminished by thick layers of paint, historically inaccurate additions, and years of misguided design efforts.

The building covers the entire lot. There is 10 feet of additional space on the north end that allowed us to construct a fire stair, mechanical enclosure, and covered outdoor deck. This exterior construction made it possible to leave the interior intact. The open framing is consistent with the exposed studs on the interior that dramatizes the construction behind the walls., Image Courtesy © Scott McDonald, Hedrich Blessing

  • Architects: Elliott + Associates Architects
  • Project: Lingo Construction Services
  • Location: Oklahoma City, OK, U.S.A
  • Photography: Scott McDonald, Hedrich Blessing
  • Software used: AutoCAD Architecture 2013, Sketchup (E+A) and 3ds MAX (Skyline Ink)
  • Client: Stan Lingo
  • Completed: March 2013
  • Scope: 12,260 sq. ft.   
  • Cost: Withheld per Owner’s request
  • Awards: 2013 Interior Design, “Best of Year” in Office/ Renovation Category, 2013 Project of the Year, Association of Subcontractors of Oklahoma

Fuzhou IT Campus by Latitude Studio

Tuesday, April 15th, 2014

Article source: Latitude Studio

The aim of a technological campus is to create a complex that works self-sufficiently to achieve a suitable environment for the production, interchange and management of technology. In this case, LATITUDE’s proposal for the IT Campus project was chosen not just because of the functional solution, but for the treatment of the scale both of the whole project and the inner spaces. Moreover, the proposal emphasizes the visual relation between the different areas within the campus.

Image Courtesy © Latitude Studio

  • Architects: Latitude Studio
  • Project: Fuzhou IT Campus
  • Year: 2013-2016
  • Type: Invited competition, First prize
  • Status: Ongoing Master Plan + Concept Design Architecture
  • Program: 230,000m2 of office space and commercial
  • Chief Architect: Manuel Zornoza
  • Project Architect: Jorge Cortes de Castro
  • Project Manager: Lihui Sim
  • Team: Huseyin Emek, Lucía Bravo, Phyo Yanadar Oo, Yann Quan
  • Software used: REVIT.

Marcel Sembat high school in Sottevillelès Rouen, France by archi5

Friday, April 11th, 2014

Article source: archi5

On an abandoned suburb, the project made waking up every day to attend school under an outstanding green-roofed structure as a child’s right.

The Marcel Sembat High School offers technical education about motors and vehicle mechanics. It demands vast spaces with high ceilings and large surfaces. It’s located in a declining industrial suburb of the port of Rouen, France.

Image Courtesy © Sergio Grazia, Thomas Jorion

  • Architects: archi5
  • Project: Marcel Sembat high school
  • Location: Sottevillelès Rouen, France
  • Photography: Sergio Grazia, Thomas Jorion
  • Software used: Autocad and Adobe Creative Suite
  • Client: Haute Normandie district.
  • Collaborators: B. Huidobro, IOSIS Ouest, SPEC, ABC Décibel
  • Steel structure contractor: Constructions Métalliques Charondière
  • Main contractor: Millery Colas
  • Surface: 12 764 m2
  • Cost: 35 320 318 Euros without taxes
  • Time-table: competition winner October 2005 – Completion 2011
  • Steel structure size: 83 x 141 m
  • Steel structure weight: 1000 tons

Studio apartment by Tamás Szén Molnár

Wednesday, April 9th, 2014

Article source: Tamás Szén Molnár

Studio apartment with high interior and cube serving as bathroom, bedroom, kitchen and dining room all at the same time. Designed with István Bényei.

Image Courtesy © Tamás Szén Molnár

Contemporary Japanese Garden in London, U.K by MyLandscapes LTD

Wednesday, April 9th, 2014

Article source: MyLandscapes LTD

The 250sqm site runs east to west and is surrounded by two buildings, a perimeter wall and open on the western side. Initially the ground was pretty level and laid to paving blocks, allowing access to the buildings but serving not much purpose and fairly static. The project took 3 months to build during the wettest winter in the British Isles at a cost of £140,000.

Image Courtesy © Amir Schlezinger

  • Architects: MyLandscapes LTD
  • Project: Contemporary Japanese Garden
  • Location: London, U.K
  • Photography: Amir Schlezinger
  • Software used: 3-D Max and Photoshop

Sheepfold Balloo in Drenthe, Netherlands by DAAD Architecten

Wednesday, April 9th, 2014

Article source: DAAD Architecten

DAAD Architecten has designed a new sheepfold, with a pitched barn and wool studio, in Balloo in Drenthe. The site, which was ruined through a fire, on the edge of the Balloo es [heightened plots of farmland, specific to Drenthe], has been developed into a public, central green, with spaces for education, information and art.

the new sheepfold combines a landscape approach for the entire site, Image Courtesy © Marianne Berkhoff

  • Architects: DAAD Architecten
  • Project: Sheepfold Balloo
  • Location: Drenthe, Netherlands
  • Photography: Marianne Berkhoff
  • Software used: Vectorworks, Modelmaking, Hand drawings, AutoCad
  • Realisation: 2013

Eckelmann AG in Wiesbaden, Germany by CHRIST.CHRIST. associated architects

Tuesday, April 8th, 2014

Article source: CHRIST.CHRIST. associated architects

Eckelmann AG was established in 1977. This medium-sized company offers its customers practical solutions for electronic machine controls and software development and system integration for the system automation. The spectrum ranges from compact device control through to the automation of scattered industrial systems.

Image Courtesy © CHRIST.CHRIST. associated architects

  • Architects: CHRIST.CHRIST. associated architects
  • Project: Eckelmann AG
  • Location: Wiesbaden, Germany
  • Software Used: Autocad
  • Staff: Ronni Neuber, Christiane Bolesta
  • Structural design: Schmitt + Thielmann und Partner | Wiesbaden
  • Construction volume: Floor space 1,400 m², Gross floor space 2,000 m², Gross capacity 7,750 m³
  • Realisation: 2012-2013

MAIN STREET HOUSE in Seattle, WA by SHED Architecture & Design

Tuesday, April 8th, 2014

Article source: SHED Architecture & Design

Located in Seattle’s Leschi neighborhood the Main Street House takes its name from the unimproved right of way and pedestrian path that bounds its site to the north. The single family house was built for a husband and wife, both geologists, nearing retirement but actively working from home.

Image Courtesy © Mark Woods

  • Architects: SHED Architecture & Design
  • Project: MAIN STREET HOUSE
  • Location: Seattle, WA, U.S.A
  • Photography: Mark Woods
  • Software Used: Sketch up and Autocad
  • Square Footage: 2,332
  • Contractor: David Gray Construction
  • Landscape Desgin: Urban Wilds
  • Structural Engineer: Harriott Valentine Engineers
GRAPHISOFT: ARCHICAD download 30-day FREE trial
Canon
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy