Archive for the ‘Autodesk’ Category
Wednesday, July 23rd, 2014
Article source: Robert M. Gurney, FAIA Architect
Rolling topography, open fields and woodlands comprise a 24 acre site in Rappahannock County, Virginia where this new house is located. Extensive site investigation, including erecting scaffolding at various locations, resulted in the placement of the house high on one of the hills, overlooking a meadow at the base of woodlands. The house is organized as a series of volumes, arranged linearly and positioned to optimize distant views of the Blue Ridge Mountains.
Image Courtesy © Maxwell MacKenzie
- Architects: Robert M. Gurney, FAIA Architect
- Project: 4 Springs Lane
- Location: Rappahannock County, VA, U.S.A
- Photography: Maxwell MacKenzie
- Software used: Autocad, SketchUp, and Photoshop
- Project Architect: Brian Tuskey
- Contractor: Erwin Opitz, Opitz Construction Consulting, Inc.
- Engineer: D. Anthony Beale LLC
- Landscape Architect: Kevin Campion, Campion Hruby Landscape Architects
- Interior Designer: Therese Baron Gurney, ASID – Baron Gurney Interiors
- Completion Year: 2013
Wednesday, July 23rd, 2014
Article source: Raimundo Anguita
The area is located in Vitacura’s commune, in a residential zone of the 80s where it has begun a renovation of the constructions The order consisted of a modern house for a large family
Image Courtesy © Oliver Yaneza
- Architects: Raimundo Anguita
- Project: ARTIAGOITIA HOUSE
- Location: Santiago, Chile
- Photography: Oliver Yaneza
- Software used: Auto cad
- Design year: 2010
- Construction year: from 2011 to 2012
- Site area: 1100 m2
- Building area: 260 m2
- Total floor area: 440 m2
Saturday, May 24th, 2014
Article source: Fougeron Architecture
400 Grove Street/Parcel H is a 33-unit market-rate development in the heart of Hayes Valley. This prominent site at the corner of Grove and Gough Streets is one of the parcels left vacant by the demolition of the Central Freeway, and is in a dynamic, urban San Francisco neighborhood.
Image Courtesy © Fougeron Architecture
- Architects: Fougeron Architecture
- Project: Wavehouse (400 Grove)
- Location: Hayes Valley, San Francisco
- Software used: Rhino and AutoCad.
Friday, May 23rd, 2014
Article source: Arquitectura en Estudio + Natalia Heredia
The challenge was to design a country house in the surroundings of the town of Villeta (Colombia), 1.5 hours to the west of Bogotá; at 967 meters above sea level, with a predominantly hot and dry weather all year round. The site’s constraints were very clear; a very steep land that starts at the top of a hill going all the way down to the stream “El Cojo”. The brief asked for a built area of 550m2, including 3 rooms, studio, service and social areas, a terrace and a swimming pool, all this under one essential demand: the house must be able to be completely closed whenever it’s not in use.
Image Courtesy © David Uribe
- Architects: Arquitectura en Estudio + Natalia Heredia
- Project: Casa 7A
- Location: Villeta, Colombia
- Photography: David Uribe
- Software used: Autocad and 3d sketchup model
- Design team: Carlos Nuñez, talia Heredia
- Designed and built: 2012 – 2014
- End of construction: January 2014
- Area: 550 m2
Friday, May 23rd, 2014
Article source: Henrique Barros-Gomes
Complete refurbishment of a late 60´s apartment in Lisbon.
Facing 3 streets, the apartment has great sun exposure and nice views to the surrounding areas. However, its original condition showed a very spacious, but also poorly divided and unbalanced interior, with many partitions, resulting in a needlessly intricate and dark plan. Social and private areas arrangement did not make much sense either – It was felt from the first moment that the house would gain if its organization was completely reversed. Nevertheless, it was a solid construction with a generous ceiling height, and great potential for intervention.
Image Courtesy © Henrique Barros-Gomes
- Architects: Henrique Barros-Gomes
- Project: Apartment Refurbishment
- Location: Lisbon, Portugal
- Photography: Henrique Barros-Gomes
- Software used: CAD software
- Date of project: 2013
- Date of completion: 2013
- Status: Built
- Built Area: 210m2
- Construction: A Renovadora
Friday, May 23rd, 2014
Article source: MANCO ARCHITECTS INC.
The project was designed to reconstruct Nihat Bey Apartment proven to be not structurally resistant against an earthquake and needs to be demolished according to the Urban Regeneration Law.
Each one of the 12 units to be included in the new building were individually designed according to the special needs of their owners.
Image Courtesy © MANCO ARCHITECTS INC.
- Architects: MANCO ARCHITECTS INC.
- Project: Nihat Bey Apartment Building
- Software used: AutoCAD LT, SketchUp and V-Ray
Thursday, May 22nd, 2014
Article source: Paul Cha Architect
Located in the bustling Union Square area, the 2500 SF trapezoid shaped loft is housed in a former department store, with original cast iron columns and tin ceilings. The client, an educational consultant, requested a tranquil residence for daily living as well as receiving frequent guests.
Image Courtesy © Paul Cha Architect
- Architects: Paul Cha Architect (Ali Koluman)
- Project: Union Square Loft
- Location: New York, USA
- Software used: Autocad.
- Material: Cherry wood(cabinetry), granite slab in absolute black honed finish(kitchen counter) & milk glass
Tuesday, May 20th, 2014
Article source: J. MAYER H. und Partner, Architekten
J. MAYER H. und Partner, Architekten has been named the winner of the invited competition for Volt Berlin, a new concept for a location for shopping and urban experience near Berlin’s Alexanderplatz. The experience cluster is a fusion concept combining a multi-brand store, various experiential offerings, events, and a hotel, and is directed towards adventurous visitors with a focus on a smart urban lifestyle.
Image Courtesy © J. MAYER H. und Partner, Architekten
- Architects: J. MAYER H. und Partner, Architekten
- Project: VOLT Berlin
- Location: Berlin, Germany
- Software used: ArchiCad and Rhino, Maya.
- Competition Team: Christoph Emenlauer, Simon Kassner, Bart van den Hoven, Mehrdad Mashaie, Mael Kang, Paul Angelier, Julien Sarale
- Client: TKN Real Estate Solutions AG in cooperationwith Jochen Schweizer Projects AG
- Fire Security Consultant: KLW Ingenieure GmbH
- Structural Engineer: Knippers Helbig GmbH
- Building Service Engineer: Transsolar Energietechnik GmbH
- CostPlanning: Jablonka Sieber Partner Architekten
- Engineering Consultant, Escalatorsand Elevators: Lüsebrink Ingenieure VBI
- Total Floor Area: approx. 29.500 m2
- Retail Space: approx. 13.000 m2
- Gastronomy: approx. 2.000 m2
- Hotel: approx. 7.500 m2
Saturday, May 17th, 2014
Article source: za bor architects
It is projected to locate the Tennis club on the 1.5 hectare area, on Istra riverside, in one of the most picturesque districts of Moscow Suburbs.
The project presumes, beside five open air courts, the creation of a large sports and recreational infrastructure incorporated in one vast complex.
Image Courtesy © za bor architects
- Architects: za bor architects (Peter Zaytsev, Arseniy Borisenko)
- Project: Istra Tennis Club
- Location: Moscow, Russia
- Software used: 3Ds Max and ArchiCAD
- Site area: 1.5 Ha
- Apartments area: 6 080 sqm
- Built-on area: 4 890 sqm
- Building volume: 63 557 cbm
Friday, May 16th, 2014
Article source: PICHARCHITECTS
The project of “Santa Madrona” deals with an urban space, where two apartment blocks with an affordable renting price have to be placed, nearby a small public square of the Gracia neighbourhood of Barcelona. The intervention had to place also, a public equipment on its ground floor, with a specific area and some specific leisure spaces. So then, the project had this interesting challenge to propose in one hand apartment blocks with an affordable renting price, with all the facilities that were needed, an urban space intimately bounded to the block’s life and an equipment that will promote the so necessary mixture of uses.
Image Courtesy © Simón García
- Architects: PICHARCHITECTS
- Project: SANTA MADRONA”. 62 SOCIAL DWELLINGS
- Location: Barcelona, Spain
- Photography: Simón García
- Software used: AUTOCAD
- Volume of the construction: 5.704,10 m²
- Final Cost: 3.106.091,92€
- Authors: Felip Pich-Aguilera Baurier and Teresa Batlle i Pagès. Architects.
- Group Directors: Angel Sendarrubias. Pau Casaldáliga
- Project Director: Ute Müncheberg
- Specialists: INDAGSA, structure. RP GRUP, facilities. GPCAT, measurements and estimates.
- Building company: INBISA