Open side-bar Menu
 ArchShowcase

Archive for the ‘Autodesk’ Category

Villa über Villach in Carinthia, Austria by Pilz Architektur

Tuesday, February 26th, 2013

Article source: Pilz Architektur

The plot:
Located approximately 100 meters above Villach, with beautiful views over the city and to the south lying mountains of the Julian Alps and Karavanke. An existing, long been uninhabited and dilapidated house from the Sixties was on the ground about 4200 square meters and has been canceled. Surrounded by woods, fields and a few houses, the land a special Atmosphere.

Image Courtesy © Paul Ott 

  • Architects: Pilz Architektur
  • Project: Villa über Villach
  • Location: Villach, Carinthia, Austria
  • Photography: Paul Ott
  • Architecture and overall planning: Pilz Architektur, Arch DI Paul Michael Pilz
  • Type: Single-family home
  • Site area: 4284
  • Living space: 345 m²
  • Built-up area: 266 sqm
  • Net construction costs: about 2000 € / m²
  • Planning beginning: October 2007
  • Construction: September 2008
  • Completion: Summer 2009
  • Software used: AutoCAD

Press Conference Room in Paris, France by h2o Architectes

Saturday, February 23rd, 2013

Article source: h2o Architectes

The client’s specific request for this press conference room was to create a project that would be both contemporary and timeless at the same time in order to match the Institution that it would represent. We aimed to transform this “technical tool” into a space of representation and communication for the Minister and its politicians. A high number of technical equipments and utilities needed to be integrated in the suspended ceilling in order to a clear a clean, bright and sun filled space.

Image Courtesy © Stéphane Chalmeau 

  • Architects: h2o Architectes
  • Project: Press Conference Room
  • Location: Rue de Varenne, Paris, France
  • Photography: Stéphane Chalmeau
  • Program: Press Conference Room for the French Ministery of Agriculture in a 19th century building listed as a Historical Monument
  • Client: French Ministery of Agriculture
  • Team: h2o architectes with Engineering
    – Ingénierie Louis Choulet, HVAC
    – Cabinet Virtz, Economist
    – BMI, Structural Engineer
    – Scène, Scenography
  • Project area: 100m²
  • Delivery: December 2010
  • Software used: Rhino & AutoCAD

Cabué House in Argentina, Patagonia by Nomade Architects

Saturday, February 23rd, 2013

Article source: Nomade Architects

This 130 m² house is constructed in “Los Huemules” Ecological Reserve, 10 km from El Chalten town in the southern part of Santa Cruz province, Argentina. The Patagonian natural environment that surrounds the project was the most important input for designing this residence: the scale of the construction is aligned with the forest canopy providing a contained horizontal view from the interior to the sheltered heart of the forest.

Image Courtesy Nomade Architects 

  • Architects: Nomade Architects
  • Project: Cabué House
  • Location: El Chaltén, Santa Cruz, Argentina
  • Software used: Autocad and 3DStudio

Tree-Trunk Garden House in Hilversum, The Netherlands by Piet Hein Eek

Thursday, February 21st, 2013

Article source: Piet Hein Eek

It sometimes happens that you are asked to produce something you have actually wanted to do for some time. A customer called and asked if we could build a log shack in his field, one that would be large enough to sit and write inside. I loved the idea from the start. Oddly enough, we’ve recently received quite a few questions about the log shack we produced years ago.

Image Courtesy © Thomas Mayer 

  • Architects: Piet Hein Eek
  • Project: Tree-Trunk Garden House
  • Location: Hilversum, The Netherlands
  • Photography: Thomas Mayer
  • Software used: AutoCAD Lite

23 Local Authority Housing in Paris, France by Avignon-Clouet Architectes

Thursday, February 21st, 2013

Article source: Avignon-Clouet Architectes

There are two buildings situated n°42-48 “Rebière” street. It includes 23 accommodations: G+3 Duplex (7 units) and G+8 (16 units + 1 association premises of 80 m2). These two separate entities surround two other buildings designed by the agency “Atelier Provisoire” from Bordeaux. The buildings are connected through exterior walkways. The selected urban location allows to create one of the only ground floor with garden, on the whole construction project of “Rebière” street.

Image Courtesy © Stéphane Chalmeau 

  • Architects: Avignon-Clouet Architectes
  • Project: 23 Local Authority Housing
  • Location: Paris, France
  • Photography: Stéphane Chalmeau
  • Software used: AutoCAD, Rhino, 3dS Max

303 Canyon in Boulder, Colorado by Arch11

Wednesday, February 20th, 2013

Article source: Arch11

In Boulder, Colo., three households recently moved into an Arch11-designed townhouse project built on a small lot in a funky light industrial area near Boulder’s downtown area. The project– a design/build collaboration between Arch11, a commercial and residential architecture firm with offices in Boulder and Denver, and Hammer well, a Boulder construction firm – was recently featured in The New York Times Home  section.

Image Courtesy © Raul Garcia 

  • Architects: Arch11
  • Project: 303 Canyon
  • Location: Boulder, Colorado, USA
  • Photography: Raul Garcia
  • Main construction materials: Steel panels with Galvalume finish., Cedar siding on a rain screen, Stucco
  • Any sustainable features of the design: Well- built/ well insulated, Xeric landscaping, Passive solar design orientation, FSC lumber, Minimixed land use
  • Any key products you specified for the project: Wolf sub-zero appliances, Spark-fire fireplaces, Flooring—polished concrete, Handmade Heath Tiles
  • Software used: Sketchup and Revit

Bularnia in Krakow, Poland by BudCud

Wednesday, February 20th, 2013

Article source: BudCud

Bularnia is an honest, functional office space on the ground floor of postindustrial building on the outskirts of Cracov. The goal was to introduce more natural light to dark and overpowering interior. This move redefined new proportions of space and optically enlarged narrow and low room. What’s more, light and transparent finishing materials, such as glass, delicate steel mesh and perforated boards were used to emphasize the openness of new office space.

Image Courtesy © Kamila Kozińska 

  • Architects: BudCud
  • Project: Bularnia
  • Location: ul. Bularnia 5, 31-222 Kraków, Poland
  • Photography: Kamila Kozińska (1-3, 5-11), Agata Kadenacy (4,12)
  • Authors: BudCud ( Mateusz Adamczyk, Agata Woźniczka), Maria Schoen
  • Function: office space – accounting
  • Client: ASPEN S.A.
  • Usable area: 175 m2
  • Volume: 533 m3
  • Project Year: 2010
  • Completed: 2012
  • Software used: Autocad, Rhinoceros, SketchUp, Photoshop and Illustrator, as well as physical models.

B-House in Tel Aviv, Israel by Architekturbuero Sven Roettger

Monday, February 18th, 2013

Article source: Architekturbuero Roettger

The historic context of the “WHITE CITY” of Tel Aviv with its unique assemblage of “Bauhaus-Architecture” inspired this residential design. The solid geometrical volume joins those of its prominent neighbors, inserting a contemporary interpretation of that style. The body of the building is a concrete structure, a rectangular volume cast in situ with rounded edges.

Image Courtesy Architekturbuero Sven Roettger 

  • Architects: Architekturbuero Sven Roettger
  • Project: B-House
  • Location: Tel Aviv, Israel
  • Measures: 9,5m x 12,5m x 11,25m (height)
  • Footprint: 98 m²
  • Gross floor area: 328 m²
  • Software used: 3d Studio Max Design 2012 – Autodesk

Luminous in Tokyo, Japan by Jun Sakaguchi Architect

Friday, February 15th, 2013

Article source: Jun Sakaguchi Architect

Jun Sakaguchi as a practice director of PTW Architects won a design competition for this small commercial block in Tokyo in 2006. Crowned with a penthouse rising above the 31m height limit but within the set-back line, it glows like finely cut jewellery. Most surrounding buildings are 31m high, so the penthouse enjoys open views from the timber deck terrace to the Tokyo Station area and further up to the Shinjuku district.

Image Courtesy © Tomohiro Sakashita 

  • Architects: Jun Sakaguchi as practice director of PTW Architects
  • Project: Luminous
  • Location: Kodenma-cho, Tokyo, Japan
  • Photography: Tomohiro Sakashita
  • Type: Commercial
  • Software used: ArchiCad for rendering and AutoCAD for documentation

Kokura Tower in Kyushu, Japan by Jun Sakaguchi Architect

Friday, February 15th, 2013

Article source: Jun Sakaguchi Architect

The site is located at a prominent location facing beautiful river and Kokura Castle and Jun Sakaguchi designed a sculptural tower which shape derives from a flower famous in this region. Petal-like shape maximizes views for each apartment and provides natural ventilation. Bottom levels of the tower spreads out to the ground with its organic form.

Image Courtesy © IAO 

  • Architects: Jun Sakaguchi as practice director of PTW Architects
  • Project: Kokura Tower
  • Location: Kyushu, Japan
  • Photography: IAO
  • Completed: 2008
  • Type: Residential
  • Software used: ArchiCad to make 3D model but the documentation was done in AutoCAD
GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy