Open side-bar Menu
 ArchShowcase

Archive for the ‘Autodesk’ Category

Pamp.Pavilion in Belo Horizonte, Brazil by Joao Diniz Arquitetura

Tuesday, December 5th, 2017

Article source: Joao Diniz Arquitetura

This small pavilion functions as a doorway to the design and architecture exhibition ‘Casa Cor MG 2015’ in Belo Horizonte, where ‘Brazilianity’ was the proposed theme.

‘Mineral Essence’ was the concept adopted where the rusted steel, a material that refers directly to the state of Minas Gerais’ siderurgyc activities, is used how it is provided bt the industry, on metal strips that defined the project the continuos plan conforming the surfaces of the floor, wall and ceiling.

Image Courtesy © Bel Diniz

  • Architects: Joao Diniz Arquitetura
  • Project: Pamp.Pavilion
  • Location: Belo Horizonte, Brazil
  • Photography: Bel Diniz
  • Software used: Autocad, SketchUp, Photoshop
  • Accero Team: Fabio Adriano Pereira da Silva (coord.), Fábio Adriano Santos Silva, Tiago Matos, Alvaro Soares
  • Constructed Area: 45,00 m2

(more…)

The Paper Pavilion – Radical Retail in Singapore by Larry Teo

Friday, November 24th, 2017

Article source: Larry Teo

The Paper Pavilion” – an experimental, recyclable furniture showroom concept involving the use of recyclable materials and novel technologies by student designer Larry Teo of Singapore’s Temasek Polytechnic has been selected as one of the winners of the American Architecture Prize 2017 under the Architectural Design/Small Architecture category.

A 25,000 optical glass brick facade replaces the existing cement brick walls of the warehouse, baring its structure and allowing for internal activities to be brought to the public, Image Courtesy © Larry Teo

  • Architects: Larry Teo
  • Project: The Paper Pavilion – Radical Retail
  • Location: Singapore
  • Software used: Autocad, 3dS Max

(more…)

Surfboard House in Queens, New York by BFDO Architects

Thursday, November 23rd, 2017

Article source: v2com

Five years after Hurricane Sandy devastated the cooperative beachfront community of Breezy Point, Queens, the project built upon a lot that had been reduced to sand is complete. Houses in Breezy Point are set close together and linked by pedestrian paths; cars are confined to lots at the periphery. The client’s site was unusually wide, with 68 feet of south-facing beach frontage. Flood regulations required building at least six feet off of the ground, while co-op regulations put the maximum building height at 28 feet. The co-op also required a setback from the lot line of 32 feet at the lot’s widest point. The resulting building envelope was much shallower than wide, allowing nearly every room to have an ocean view. One of the primary design strategies was stepping the south-facing facade to allow windows to wrap corners. That created diagonal sightlines up and down the beach, framing vistas and visually expanding the interior spaces. Angled roof profiles and ceiling finishes also direct the eye upward and outward.

Image Courtesy © Francis Dzikowski/OTTO

  • Architects: BFDO Architects
  • Project: Surfboard House 
  • Location: Queens, New York
  • Photography: Francis Dzikowski/OTTO
  • Software used: Rhino, Autocad

(more…)

Värtaverket Biomass-fuelled CHP plant in Djurgården, Sweden by Gottlieb Paludan Architects and URBAN DESIGN

Wednesday, November 22nd, 2017

Article source: Gottlieb Paludan Architects and URBAN DESIGN

Värtaverket is surrounded by industrial, office, residential and recreational areas. This major extension was required to show consideration for its neighbours, and respect the presence of a number of protected oak trees and the function of the area as a fauna path between the northern and southern parts of Djurgården – a scenic area that blends into Stockholm proper.

Image Courtesy © Robin Hayes

  • Architects: Gottlieb Paludan Architects and URBAN DESIGN
  • Project: Värtaverket Biomass-fuelled CHP plant
  • Location: Djurgården, Sweden
  • Photography: Robin Hayes
  • Software used: Revit
  • Client: FORTUM AB
  • Collaborators: URBAN DESIGN
  • Gpa Services: ARCHITECTURAL DESIGN, PROJECT FOLLOW-UP, SITE SUPERVISION
  • Cost: SEK 4,5OO MIO
  • Fee: DKK 11 MIO
  • Size: 20,000 M²
  • Constr. Year/status: 2016

(more…)

Catalinas Houses in Córdoba, Argentina by Orange Obras Civiles

Wednesday, November 22nd, 2017

Article source: Orange Obras Civiles

“Casas Catalinas” are family homes located in Rio Ceballos, along the Córdoba mountain range and away from the city. They set up in 5000 square-foot lands.

The project seeks to provide home solutions to middle class young families that have access to social loans provided by the state. These 1185 square-foot houses have a limited budget and the main guidelines have to do with lively rooms, austere and detail less design, reducing construction costs.

Image Courtesy © Gonzalo Viramonte

  • Architects: Orange Obras Civiles
  • Project: Catalinas Houses
  • Location: Córdoba, Argentina
  • Photography: Gonzalo Viramonte
  • Software used: Autocad, SketchUp, V-Ray
  • Constructed area: 110 (m2)
  • Year: 2016-2017

(more…)

Private Resort XIV Toba Bettei in Tsu-shi, Japan by NIKKEN SPACE DESIGN LTD

Sunday, November 19th, 2017

Article source: v2com

These guest rooms were designed as part of an annex to a membership resort hotel in Toba in Ise-Shima, where the 2016 G7 Summit was held. Arranged in an authentic Japanese style, the building is situated in a prime location overlooking the waters of Ise-Shima, with a traditional Japanese-style garden and a large pond that lends an impression of continuity to the sea. The interior was designed in a basic Japanese style that pursues new and modern expressions.

XIV Toba Bettei Guestroom-Type-S-01, Image Courtesy © Nacása & Partners Inc.

  • Architects: NIKKEN SPACE DESIGN LTD
  • Project: Private Resort XIV Toba Bettei
  • Location: 212-8, Azanie, Arashima, Toba City, Mie, Japan, 517-0021
  • Photography: Nacása & Partners Inc.
  • Software used: Autocad
  • Interior design: NIKKEN SPACE DESIGN LTD, Takeshi NAKANO・Nobuko SUZUKI・Masami SAWAMURA
  • Client: Resorttrust, Inc.
  • Surface: 8,722.41㎡
  • Completion date: 27/3/2016

(more…)

Perles et Paddock restaurant in Montréal, Canada by Clairoux

Sunday, November 19th, 2017

Article source: v2com 

Perles et Paddock is a restaurant whose interior design was brought to life by a designer, an architect and a restaurateur working in close collaboration. Clairoux’s team supplied an authentic design experience inspired by the neighbourhood’s history and tailored to the restaurant’s philosophy.

interior design restaurant decoration by Clairoux, high end interior designers commercial and residential part of Frédric Clairoux’s team in collaboration with Maxime Martel architect, Image Courtesy © atelier welldone

  • Architects: Clairoux
  • Project: Perles et Paddock restaurant
  • Location: Montreal, Quebec, Canada
  • Photography: Atelier welldone
  • Software used: Autocad
  • Interior design: FX Studio design
  • Construction: September 2016 to June 2017
    (more…)

Hue Hotel in Boracay, Philippines by CAZA

Sunday, November 19th, 2017

Article source: CAZA

Our ambition was to rethink the concept of a boutique hotel and tropical architecture for the 21st century. Embracing the lush climate, but drawing attention inward, the bulbous design comprises a stack of interlocking rings producing a continual, rhythmic cycle of entertainment and relaxation through terraces, roof gardens, and hotel amenities. The experience moves from communal, recreational spaces in the central enclosure to a collection of bespoke guest rooms along the upper reaches of the building.

Image Courtesy © Frank Callaghan

  • Architects: CAZA
  • Project: Hue Hotel
  • Location: Boracay, Philippines
  • Photography: Frank Callaghan
  • Software used: Autocad, Rhinoceros, Adobe CS, 3dS Max

(more…)

SISMA – laser technology in Vicenza, Italy by ViTre Studio

Thursday, November 16th, 2017

Article source: Nicolli srl 

For this building, Nicolli designed and installed the glass shell with purposely designed metal sun breakers inspired by the laser technology of the company. The double function of screening and porch of the sun breakers is achieved with only three types of beams (in aluminium) and one type of tilted risers (in steel), both with simple geometric shapes. The whole sun breaker system was conceived for maximum protection from sun rays in all seasons.

Image Courtesy © Marco Zorzanello

  • Architects: ViTre Studio (ing. Lorenzo Dalla Vecchia with Elisa and Massimo Dalla Vecchia architects)
  • Project: SISMA – laser technology
  • Location: Piovene Rocchette (Vicenza) – Italy
  • Photography: Marco Zorzanello
  • Software used: Autocad

(more…)

Home on the intracoastal waterway in Rehoboth Beach, Delaware by Gardner Architects LLC

Tuesday, November 14th, 2017

Article source: Gardner Architects LLC 

The Intracoastal Waterway runs along the east coast of the United States, connecting the Atlantic Ocean and the Gulf of Mexico and comprising many kinds of waterways. This project sits on one of those waterways – the Lewes and Rehoboth Canal – in a coastal maritime forest with sandy dunes, and facing grassy marshes and perennial wetlands.

Image Courtesy © JohnCole

  • Architects: Gardner Architects LLC 
  • Project: Home on the intracoastal waterway
  • Location: Rehoboth Beach, Delaware, USA
  • Photography: JOHN COLE
  • Software used: Autocad, SketchUp
  • Project Size in Square Feet: 3500 sf

(more…)

Bentley: -YII 2018 Awards
AIA 2018
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise