Open side-bar Menu
 ArchShowcase

Archive for the ‘Autodesk’ Category

West End Ferry Terminal in Brisbane, Australia by COX Rayner Architects

Tuesday, July 23rd, 2013

Article source: COX Rayner Architects

The West End Ferry Terminal is a small project that was designed to simultaneously generate a new typology for Brisbane’s Citycat Terminals and act as a sheltered social gathering space at the end of one of Brisbane’s historic riverfront parks, one endeared in the hearts of the West End community.
As a result, the whole conception of the terminal was subject to many community consultation events, most originally opposing removal of an existing brick post-war facility which had insurmountable CEPTED issues.

Image Courtesy © Christopher Frederick Jones

  • Architects: COX Rayner Architects
  • Project: West End Ferry Terminal
  • Location: Brisbane, Australia
  • Photography: Christopher Frederick Jones
  • Software used: Auto CAD and modelled using 3D Studio Max.

Dyv-Net Dynamic vertical networks in Tai Po, Hong Kong by JAPA architects

Sunday, July 21st, 2013

Article source: JAPA architects 

Since 2000, China’s cities have expanded at an average rate of 10% annually. Although China’s agricultural output is the largest in the world, only about 15% of its total land area can be cultivated. China’s arable land, which represents 10% of the total arable land in the world, supports over 20% of the world’s population. Of this approximately 1.4 million square kilometers of arable land, only about 1.2% (116,580 square kilometers) permanently supports crops and 525,800 square kilometers are irrigated. The land is divided into approximately 200 million households, with an average land allocation of just 0.65 hectares (1.6 acres)

Image Courtesy © JAPA architects

  • Architects: JAPA architects
  • Project: Dyv-Net Dynamic vertical networks
  • Location: Tai Po, Hong
  • Awards: Citation in the FuturArc Prize 2013
  • Author: JAPA, Javier Ponce Architects, Barcelona-Guatemala
  • The Site: Tai Po District, Hong Kong & other potential cities
  • Strategic rethink of the Asian City: China’s limited space for farming
  • Software used: Rhino, 3ds max and Photoshop

Gottshalden in zurich, Switzerland by Rossetti + Wyss Architekten

Sunday, July 21st, 2013

Article source: Rossetti + Wyss Architekten 

The house in Gottshalden is located on a plateau over the Lake Zurich. It is set in green surroundings with a high quality of life, dominated by agriculturaluse. The volume exhibits a unified design, with a reduced, sharp-angled timber facade. The furniture-like wooden skin defines both walls and rooftops, covering the exterior in a single material, unbroken. The various geometries lend the structure plasticity, while the windows flush with the exterior, are emphasized with lighter-colored reveals.

Image Courtesy © Jürg Zimmermann

  • Architects: Rossetti + Wyss Architekten
  • Project: Gottshalden
  • Location: zurich, Switzerland
  • Photography: Jürg Zimmermann
  • Year of completion: 2012
  • Netto surface area: 320 m2
  • Site area: 2’300 m2
  • Project leader: Claudio Sticca
  • Supporting structure: Dr. Lüchinger+MeyerBauingenieure AG, Zürich Switzerland
  • Electro planning: ZürcherElektroplanungen AG, St. Gallen Switzerland
  • Heating and ventilation planning: Geiger AG, WädenswilSwitzerland
  • Building physics: BWS Bauphysik AG, Winterthur Switzerland
  • Execution: October 2010, May 2012
  • Software used: Topcad

PINC Pavilion in Porto, Portugal by Clínica de Arquitectura

Sunday, July 21st, 2013

Article source: Clínica de Arquitectura

PINC  Pole for the Creative Industries of Park of Science and Technology, University of Porto – quickly became a space of great dynamism of Porto. A recognized centre for the creation and production of events and contacts.

Image Courtesy © Alexandre Delmar

  • Architects: Clínica de Arquitectura
  • Project: PINC Pavilion
  • Location: Porto, Portugal
  • Photography: Alexandre Delmar
  • Client: UPTEC
  • Contractor: SHIFT Empreitadas
  • Work conclusion: December of 2012
  • Function: Pantry and formation room
  • Landscaping: Maria Luís Gonçalves
  • Coordination: SWark
  • Contractor: SHIFT Empreitadas
  • Area: 70m²
  • Software used: Autocad 2010

48 NCR on North Canal Road, in Singapore by WOHA

Saturday, July 20th, 2013

Article source: WOHA

The project brief called for a new boutique office and the reconstruction of a pair of heritage-listed shophouses. WOHA was commissioned only after their demolition to reconstruct the shopfront (up to 7.5m depth) in accordance with Singapore’s Urban Redevelopment Authority’s conservation and planning guidelines, and to design an entirely new, contemporary rear wing.

Front view of office block and conservation shophouse from urban park, Image Courtesy © Patrick Bingham-Hall

  • Architects: WOHA
  • Project: 48 NCR on North Canal Road
  • Location: 48 North Canal Road, Singapore
  • Photography: Patrick Bingham-Hall
  • Project Dates: Design Inception: Oct 2009, Start of Construction: Oct 2010, Completion/TOP: 18 Oct 2012
  • Project Cost: S$ 9.5 million
  • Project Size: Gross Floor Area: 1,370.04 sqm, Plot/Site Area: 326.20 sqm
  • Architects & Interior Design: WOHA
  • Project Team: Wong Mun Summ, Richard Hassell, Ang Chow Hwee, Daniel Fung, Dennis P. Formalejo, Christina Ong, Eric Barthole
  • Client: Maybank Kim Eng Properties Pte Ltd
  • Software used: Autocad and Rhinoceros

Mozilla Factory Space in Japan by NOSIGNER

Friday, July 19th, 2013

Article source: NOSIGNER

What’s OPEN SOURCE FURNITURES?

Recently, Mozilla Japan’s new office’s ground floor was designed by NOSIGNER. They designed all furnitures based on the idea of Open Source. They used general products and uploaded all drawings to the website. Therefore, these designs might also be able to call the “open source furniture” so to speak. Because these designs enable everyone to make functional office furnitures inexpensively

Image Courtesy © HATTA

  • Architects: NOSIGNER
  • Project: Mozilla Factory Space
  • Location: Japan
  • Photography: HATTA
  • Software used: Adobe illustrator, CINEMA4D and CAD

RELIGIOUS BOOKSHOP – PAULUS in Lisboa, Baixa by Site Specific Arquitectura

Friday, July 19th, 2013

Article source: Site Specific Arquitectura

The proposal intends to create a new identity for a traditional and classic product, religious, which unifies the several bookshops from the publisher. Innovating and updating without neglect the message of the editorial project, through clear and bright spaces, which communicate with the public, with flexibility to receive different products – books and religious articles – and different activities – book launches, conferences and movies.

Image Courtesy © d10photo, david pereira

  • Architects: Site Specific Arquitectura
  • Project: RELIGIOUS BOOKSHOP – PAULUS
  • Location: Lisboa, Baixa
  • Photography: d10photo, david pereira
  • Year: 2013
  • Software used: Autocad and Archicad

House at Zimmerberg Bottom in Zurich, Switzerland by Rossetti + Wyss Architekten

Thursday, July 18th, 2013

Article source: Rossetti + Wyss Architekten 

HOUSE AT ZIMMERBERG BOTTOM

The one-story house, which has impressive diagonal views of Lake Zurich and the Alps, issituated on the upperedge of the village, on a longish, slightly sloping site. The constructionisd efined by a guide wall and angular concrete wall establishing the diagonal panorama towards the lake.

Image Courtesy © Jürg Zimmermann

  • Architects: Rossetti + Wyss Architekten
  • Project: House at Zimmerberg Bottom
  • Location: Zurich, Switzerland
  • Photography: Jürg Zimmermann
  • Project leader: Tobias Lindenmann
  • Collaborators: Claudio Sticca, Caroline Welter
  • Supporting structure: Ingenieurbüro Hansruedi Schlatter, Oberrieden
  • Building physics: Bakus Bauphysik & Akustik GmbH, Zürich
  • Execution: April 2006, February2007
  • Living area: 170 squaremetres
  • Software used: TopCad

Pool & outdoor lounge in Formentera, SPAIN by Marià Castelló Martínez

Thursday, July 18th, 2013

Article source: Marià Castelló Martínez

The project issues from the desire to create a bath and recreation area as core of relationship between the two centenary houses of Can Xomeu Sord, located in the Vénda de Sa Talaissa (La Mola) on the island of Formentera.

Image Courtesy © Estudi Es Pujol de s’Era

  • Architects: Marià Castelló Martínez
  • Project: Pool & outdoor lounge
  • Location: Formentera, SPAIN
  • Photography: Estudi Es Pujol de s’Era
  • Building engineer:  José Mota
  • Structure: Ferran Juan
  • Archaeological monitoring: Glenda Graziani
  • Collaborators: Marga Ferrer, Pedro Mota, Ferran Juan
  • Builder: M+M Proyectos
  • Project: 2010-2013
  • End of work: 2013
  • Surface: 223,35 m2
  • Software used: AudoCAD, Sketchup and Photoshop

(more…)

Kaiseki Yoshiyuki + Horse’s Mouth in Singapore by Asylum

Thursday, July 18th, 2013

Article source: Asylum

Singapore, October 2012 — Asylum designs Kaiseki Yoshiyuki and Horse’s Mouth, two new Japanese F&B concepts exclusively tucked away in Forum the Shopping Mall, Singapore. Creative agency Asylum takes Japanese fine dining to a new dimension, while introducing a speakeasy-style Izakaya; designing Kaiseki Yoshiyuki and Horse’s Mouth, opened by new restaurant group Iki Concepts. Housed discreetly in the basement of Forum the Shopping Mall Singapore, Kaiseki Yoshiyuki presents traditional kaiseki cuisine in an elegantly modern setting, while Horse’s Mouth serves Japanese bar food and cocktails with a playful mood. Different in personality, the two new concepts share the same interior space, measuring 418 square metres.

Image Courtesy © Asylum

  • Architects: Asylum
  • Project: Kaiseki Yoshiyuki + Horse’s Mouth
  • Location: Singapore
  • Software used: Sketchup and Autocad
GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley:Microstation License
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy