Open side-bar Menu

Archive for the ‘Autodesk’ Category

Luminous in Tokyo, Japan by Jun Sakaguchi Architect

Friday, February 15th, 2013

Article source: Jun Sakaguchi Architect

Jun Sakaguchi as a practice director of PTW Architects won a design competition for this small commercial block in Tokyo in 2006. Crowned with a penthouse rising above the 31m height limit but within the set-back line, it glows like finely cut jewellery. Most surrounding buildings are 31m high, so the penthouse enjoys open views from the timber deck terrace to the Tokyo Station area and further up to the Shinjuku district.

Image Courtesy © Tomohiro Sakashita 

  • Architects: Jun Sakaguchi as practice director of PTW Architects
  • Project: Luminous
  • Location: Kodenma-cho, Tokyo, Japan
  • Photography: Tomohiro Sakashita
  • Type: Commercial
  • Software used: ArchiCad for rendering and AutoCAD for documentation

Kokura Tower in Kyushu, Japan by Jun Sakaguchi Architect

Friday, February 15th, 2013

Article source: Jun Sakaguchi Architect

The site is located at a prominent location facing beautiful river and Kokura Castle and Jun Sakaguchi designed a sculptural tower which shape derives from a flower famous in this region. Petal-like shape maximizes views for each apartment and provides natural ventilation. Bottom levels of the tower spreads out to the ground with its organic form.

Image Courtesy © IAO 

  • Architects: Jun Sakaguchi as practice director of PTW Architects
  • Project: Kokura Tower
  • Location: Kyushu, Japan
  • Photography: IAO
  • Completed: 2008
  • Type: Residential
  • Software used: ArchiCad to make 3D model but the documentation was done in AutoCAD

The Curving House in Gyeonggi-do, Korea by JOHO Architecture

Thursday, February 14th, 2013

Article source: JOHO Architecture

There is no home for parking

I remember that it was a winter day after snowing when I first visited the site. It was a rare residential lot with an open view to the south at the dead end of a small path beneath Mt. Gwanggyo. What was unique about this lot was that it was very hard to turn the car to come out of the path after more than 2 cars parked, because it was a small path only 4 m in width.  Ironically, the fundamental challenge was not only solving the parking problem but also creating a space for both parking and gardening to coexist.

Image Courtesy © Sun Namgoong 

  • Architects: JOHO Architecture
  • Project: The Curving House
  • Location: 678-2, Sinbong-dong, Suji-gu, Yongin-si, Gyeonggi-do, Korea
  • Photography: Sun Namgoong
  • Architect: Jeonghoon LEE 
  • Design Team: JOHO Architecture(Il-Sang Yoon, Gae-hee Cho) 
  • Use: Housing 
  • Completion: 2012.10 
  • Construction: Dong-jin Chea(DL donglim construction) 
  • Client: Im-jeong Choi 
  • Material: Exposed Concrete + Ash-colored Brick + STS panel(mirror type) 
  • Site area: 529.00 sqm 
  • Building area: 140.57 sqm 
  • Building to land ratio: 26.57% (<40%) 
  • Floor area ratio: 35.22% (<100%)
  • Building scope: 3F
  • Software used: Rhino & AutoCAD

Office Tower and Exhibition Center in Kai Tak, Hong Kong by Michael Arellanes II

Thursday, February 14th, 2013

Article source: Michael Arellanes II

The tower and exhibition hall is a proposal for Hong Kong’s Kai Tak development, an airport landing strip that will be reclaimed into the city as a new cultural, business, and residential district. The tower is an expressionof fluid movement that manifests into a series of folds, creases, and a bifurcation of massing creating a dual tower.

Image Courtesy Michael Arellanes II 

  • Architects: Michael Arellanes II
  • Project: Office Tower and Exhibition Center for Hong Kong
  • Location: Kai Tak, Hong Kong
  • Software used: 3D Modeling and rendering: Maya 2013. Alternative Renderings: 3D Studio MAX, Photoshop: Image adjustment, Illustrator: Importing Drawings for PDF. AutoCAD: Drawings

Kaohsiung Waterfront in Taiwan by Jvantspijker Urbanism Architecture

Thursday, February 14th, 2013

Article source: Jvantspijker Urbanism Architecture

The Kaohsiung Waterfront is being made accessible to the city and its inhabitants due to the departure of navy and industrial functions. The project proposes a strategy for waterfront redevelopment by integrating the natural beauty of the adjacent forested mountain, a low density residential/leisure oriented program and heavy central business district program in balance.

Kaohsiung waterfront development – atmospheric impression of the new face of Kaohsiung City : Image Courtesy Jvantspijker Urbanism Architecture 

  • Architects: Jvantspijker Urbanism Architecture & CULD project
  • Project: Kaohsiung Waterfront
  • Location: Kaohsiung, Taiwan
  • Type: Invited competition, 1st prize
  • Client: Kaohsiung City Government
  • Partners: EDS, Taipei
  • Program/Size: 2 km waterfront, 2 million m2 mixed use
  • Status: Masterplan completed and delivered to client (2009)
  • Software used: AutoCAD and 3dS Max

The Constantia Kloof in Johannesburg, South Africa by Nico van der Meulen Architects

Wednesday, February 13th, 2013

Article source: Nico van der Meulen Architects

Following the trend of making alterations to and revamping existing houses, the owners of this home enlisted the expertise of Nico van der Meulen Architects for a modern upgrade. “They liked the current trend in our work towards a mix of steel construction and concrete framing,” explains Nico van der Meulen of Nico van der Meulen Architects.

Image Courtesy © Barend Roberts and Victoria Pilcher 

  • Architects: Nico van der Meulen Architects
  • Project: The Constantia Kloof
  • Location: Johannesburg, South Africa
  • Photography: Barend Roberts and Victoria Pilcher
  • Software used: Revit

Office Under the Garden in Innsbruck, Austria by Architekt Daniel Fügenschuh ZT GmbH

Wednesday, February 13th, 2013

Article source: Architekt Daniel Fügenschuh ZT GmbH

A work live studio was first set up as an architect’s office for himself in 2005 when Daniel Fügenschuh converted a townhouse from 1914 in Innsbruck. Over the years the office space became too small and he decided to expand his office by placing a new built office in the underground of the townhouses’ garden. After completion the garden was laid on top again.

Image Courtesy © Christian Flatscher 

  • Architects: Architekt Daniel Fügenschuh ZT GmbH
  • Project: Office Under the Garden
  • Location: Innsbruck, Austria
  • Photography: Christian Flatscher
  • Architect: Daniel Fügenschuh 
  • Mechanical engineer: Drexel + Weiss 
  • Structural engineer: Alfred Brunnsteiner 
  • Light planner: Ferdinand Höllrigl 
  • Completed: 2008 
  • floor space: 305 m²
  • Software used: AutoCAD

Danks and Bourke in Sydney, Australia by Tony Owen Partners

Saturday, February 9th, 2013

Article source: Tony Owen Partners 

The new Danks & Bourke commercial building is a refurbishment of a 1960’s concrete furniture warehouse. It is located in the former industrial area of Danks Street, which has lately become a trendy hub for the designer commercial set. The triple-frontage building contains 5,000sqm of office space over two levels, a supermarket and specialty retail stores on the ground floor.

Image Courtesy Tony Owen Partners 

  • Architects: Tony Owen Partners 
  • Project: Danks and Bourke
  • Location: Danks Street, Sydney, Australia
  • Software used: Autocad, Revit, 3-D Studio Max, Maya and Rhino

Hovenring Bicycle Roundabout in Eindhoven, Netherlands by IPV Delft

Thursday, February 7th, 2013

Article source: IPV Delft

The spectacular  circular cycle bridge in the Dutch city of Eindhoven has recently been opened to the public. The cable-stayed bridge, designed by ipv Delft, offers cyclists and pedestrians an exciting crossover. With its impressive pylon, 72 metre diameter, thin deck and conspicuous lighting, the cyclist roundabout is a new landmark for the city.

Image Courtesy IPV Delft

  • Architects: IPV Delft
  • Project: Hovenring Bicycle Roundabout
  • Location: Eindhoven, Netherlands
  • Software used: Autocad Mechanical for the conceptual and architectural design of the Hovenring, while Tekla Structures was used for the implementation design


Darla Moore School of Business, University in Columbia, South Carolina by Rafael Vinoly Architects

Wednesday, February 6th, 2013

Article source: Rafael Vinoly Architects

Rafael Vinoly Architects is proud to announce that the University South Carolina celebrated the “Topping Out” of the new building for the Darla Moore School of Business in a ceremony today held at the construction site. The Darla Moore School of Business, globally renowned for its international business program, has until now been housed in a 1970s-era building located near the university’s historic Horseshoe, site of the original campus established in 1801. The new building—designed by Rafael Viñoly Architects and commissioned by alumna and namesake Darla Moore through a $70 million donation—will provide an environment well suited to answer the challenges of a 21st century business school.

Image Courtesy Rafael Vinoly Architects  

  • Architects: Rafael Vinoly Architects
  • Project: Darla Moore School of Business, University 
  • Location: Columbia, South Carolina
  • Software used: Rhino and Autocad
GRAPHISOFT: ARCHICAD download 30-day FREE trial
TurboCAD pro : Start at $299 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy