Open side-bar Menu
 ArchShowcase

Archive for the ‘Autodesk’ Category

Entre Deux Rives in L’Île-Saint-Denis, France by PHILIPPON – KALT

Wednesday, October 8th, 2014

Article source: PHILIPPON – KALT

The Entre Deux Rives housing project, developed by the agency Philippon-Kalt, announces the start of the new Ile-Saint-Denis riverside green neighbourhood. The development will revitalize a former industrial wasteland. It includes 165 homes in 8 buildings ranging from 3 and 7 floors, spread over 3 small blocks.

Image Courtesy © Hervé Abbadie

Image Courtesy © Hervé Abbadie

  • Architects: PHILIPPON – KALT
  • Project: Entre Deux Rives
  • Location: 7 Quai du Chatelier, 93450 L’Île-Saint-Denis
  • Photography: Hervé Abbadie
  • Software used: AUTOCAD
  • Client: ICADE
  • Social housing: CAPS
  • Thermal engineering consultant: ALTO
  • Engineering consultant: LGX
  • Total area: 11 100 m² SP/12 200 m² SHON
  • Cost: 16,5 M€ HT
  • Architectural Project: 2008
  • Work in two stages: July 2011 to March 2014

(more…)

TherMitte by Nissen & Wentzlaff Architects BSA SIA AG

Wednesday, October 1st, 2014

Article source:  Nissen & Wentzlaff Architects BSA SIA AG

Competition, 2004 – first place: There are three structures: a four-storey residential building along the Hauptstrasse, with a walkway which reduces noise levels, a separate structure within this unit to house the banking premises, and a three-storey residential unit parallel to the first at the rear of the plot. This layout creates an internal courtyard, which can be accessed through two generous entrances from the two neighboring streets, which also serve as entrances to the residential units behind and to the services housed on the ground floor. The buildings are enclosed in wooden latticework, creating a filigreed and calm membrane between the internal and external spaces.

Image Courtesy © Nissen & Wentzlaff Architekten

Image Courtesy © Nissen & Wentzlaff Architekten

(more…)

Laufen Forum by Nissen & Wentzlaff Architects BSA SIA AG

Tuesday, September 30th, 2014

Article source: Nissen & Wentzlaff Architects BSA SIA AG

Award „best. architects 11“; „Award 2010 for Marketing + Architecture“: The building is primarily used to present the company’s current products to visitors in a form that not only shows off their appearance but also demonstrates their use. At the same time, the premises are a suitable venue for public events, product presentations and informal gatherings. The two-storey building is designed as a shell, with the central core providing space for storage, the lift and side rooms. Two open, opposed and curved staircases link the ground floor to a gallery with exhibition bays and demonstration bathroom layouts on the upper floor. The atrium at the centre of the building is filled with natural light from small round skylights in the ceiling.

01

(more…)

BRANCH OFFICE OF THE COMPANY M&V in Brno, Czech Republic by Rudolf Müller

Sunday, September 28th, 2014

Article source: Rudolf Müller

Converting the building of a former garage, body shop and paint shop into a branch office of a company selling hardware and metal machining toolware falls within the projects that you simply need if you still desire to make endless search for the relationship between architecture and its surroundings, to historical and future development, and to detail. Or, the desire to search and to deliver as well, to put it more precisely. The aim is not to be bound by previously taken decisions, on the contrary, following critical discussions with experts, to select the seemingly best solution and to feel the client’s support. Subsequently, the whole process results in the absence of extremes, i.e. unilateral and pointless architectural exhibition and a unified and universal solution with stubborn efforts to reduce the budget at any cost.

Image Courtesy © KIVA

Image Courtesy © KIVA

  • Architects: Rudolf Müller
  • Project: BRANCH OFFICE OF THE COMPANY M&V
  • Location: Hněvkovského 81c, Brno, Czech Republic
  • Photography: KIVA
  • Software used: Autocad, Grasshopper, Rhinoceros
  • Client: M&V, spol. s r.o.
  • Building surface: 987 m², plus 343 m²carpark
  • Building site: 2.022 m²
  • Completion date: march 2014
  • Cooperation: Petr Kadaňka
  • Advisors: Zbyněk Holešovský- LDH, Miloslava Henešová, František Jihlavec – Profilux, Jan Klodner – BALANCE, Stanislav Král, Jaroslav Macíček, Jaroslav Mach, Vendula Markevičová, Ondřej Navrátil, Stanislav Peša, Petr Pokorný, TomášSedláček, Markéta Sedláková, Ondřej Tichý, Eva Wagnerová
  • Constructors: Main structure – KALÁB – stavebnífirma, spol. s r.o., Interior – U1 S.R.O.

(more…)

Mantois Technology Centre in Yvelines, France by Badia Berger Architectes

Saturday, September 27th, 2014

Article source: Badia Berger Architectes

The Mantois Technology Centre, located at the heart of the Mantes-Université precinct, is the first phase of the Mantes-Université development project.

Image Courtesy © TakujiShimmura

Image Courtesy © TakujiShimmura

  • Architects: Badia Berger Architectes
  • Project: Mantois Technology Centre
  • Location: Yvelines, France
  • Photography: TakujiShimmura
  • Software used: AutoCAD
  • Client: Ile-de-France region
  • Agent: SEM 92
  • Project lead: Stephane Nikolas
  • Cost:
    • Project cost: €8.374 M ex-VAT (Value as at 10/2010)
    • Cost/Sq. m€: 1,647/sq. m net surface area

(more…)

Building in Itaim in São Paulo, Brazil by FGMF Arquitetos

Saturday, September 27th, 2014

Article source: FGMF Arquitetos

Established in one of the most valued places in the city, this enterprise has a permanent view to the park across the street and towards a low-density green neighborhood.

Image Courtesy © PVID

Image Courtesy © PVID

  • Architects: FGMF Arquitetos
  • Project: Building in Itaim
  • Location: São Paulo
  • Photography: PVID
  • Software used: 3D max
  • AUTHORS: Fernando Forte, Lourenço Gimenes, Rodrigo Marcondes Ferraz
  • COORDINATOR: Ana Paula Barbosa
  • TRAINEES: Claudia Bicudo, Fernanda Silva, Rodrigo de Moura
  • Team:  Juliana Nohara, Lígia Meireles

(more…)

The birth and death of the iWeb (2001 – 2014) in Holland, Netherlands by ONL [Oosterhuis_Lenard]

Saturday, September 27th, 2014

Article source: ONL [Oosterhuis_Lenard]

The iWeb is a single space building that was originally designed as the pavilion for the province of Noord Holland for the Floriade 2002, the international exhibition of flowers and gardening, held every 10 years in The Netherlands. The iWeb was later redeveloped as laboratory for the Hyperbody Research Group (HRG), Delft University of Technology, faculty of Architecture (TU Delft). The building lost its function after a coffee machine destroyed the faculty of Architecture building in May 2008. In September 2014 ONL [Oosterhuis_Lénárd] (ONL) donated the iWeb building to the public domain by uploading the design and construction datasets to GitHub.

Image Courtesy © ONL [Oosterhuis_Lenard]

Image Courtesy © ONL [Oosterhuis_Lenard]

  • Architects: ONL [Oosterhuis_Lenard]
  • Project: The birth and death of the iWeb (2001 – 2014)
  • Location: Web of North Holland 2001-2002 – Floriadeterrein Haarlemmermeer, The Netherlands
  • Software used: Rhino + AutoCAD and AutoLISP scripts for file2factory production process
  • Size: GFA-250 m²
  • Materials: Steel structure with a skin of Hylite (aluminium composite panels)
  • Building costs: € 500.000
  • Exhibition pavillion: Web of North Holland (2001-2002)
  • Research laboratory: iWeb 2006-2014 – Delft University of Technology

(more…)

West Los Angeles Office Building in California by GMPA Architects

Thursday, September 25th, 2014

Article source: GMPA Architects

Located at a busy, pivoting point intersection where retail, commercial and residential properties merge, the design direction for this proposed office building emphasizes a connection to its neighbors—both the businesses and the residential communities—with the goal of integrating these adjacencies visually and figuratively to enhance the urban community. The concept strives to encourage pedestrian activity and communication. A predominance of translucent glass allows natural light inside while providing views to outdoor street-level activity and adding a sense of vibrancy to the community. A connection also exists between the curved front of the building and a new green public park that will face that portion of the structure.

Image Courtesy © GMPA Architects

Image Courtesy © GMPA Architects

  • Architects: GMPA Architects
  • Project: West Los Angeles Office Building
  • Location: California, USA
  • Software used: Rhino and Maya

(more…)

Sky-o-Swale® + Storefront Sports Court in Ontario, Canada by SUSTAINABLE.TO + ERA Architects

Thursday, September 25th, 2014

Article source: SUSTAINABLE.TO + ERA Architects

The Sky-o-swale is a shade-water structure that filters rainwater through a green roof, into an underground cistern. The water is used to irrigate the Community Garden. More than that, the Sky-o-swale is a shaded community gathering space—a stage for performances and seating for the Maple Leaf Sports and Entertainment (MLSE) /Jumpstart sports pad. It’s a wondrous structure, with a truly amazing history.

Image Courtesy © SUSTAINABLE.TO

Image Courtesy © SUSTAINABLE.TO + ERA Architects

  • Architects: SUSTAINABLE.TO + ERA Architects
  • Project: Sky-o-Swale® + Storefront Sports Court
  • Location: Toronto, Ontario, Canada
  • Software used: Autocad, Sketchup

(more…)

Prosecutors Office in Aghmashenebeli alley Tbilisi, Georgia by Architects of Invention

Thursday, September 25th, 2014

Article source: Architects of Invention

The firm submitted a proposal as part of an invited competition for a new build to the North West of the city, just on the outskirts of the city centre and close to the Tbilisi Court building. The building was completed in February 2012.  The brief was to create workspace for 60 members of staff, a substantial lobby and car parking. Work began in May 2011 and the building was completed in early 2012.

Image Courtesy © NAKANIMAMASAKHLISI

Image Courtesy © NAKANIMAMASAKHLISI

  • Architects:  Architects of Invention
  • Project: Prosecutors Office
  • Location: Aghmashenebeli alley Tbilisi
  • Photography: NAKANIMAMASAKHLISI
  • Software used: AutoCad, Skecthup, Rhino
  • Client: MINISTRY OF JUSTICE GEORGIA  WWW.JUSTICE.GOV.GE
  • Structural engineer: ENGENUITI.COM UK / PROGRESI.COM.GE GEORGIA
  • Constructional engineer: PROGRESI
  • Design participation: FULL DESIGN CONTROL FROM SKETCH TO COMPLETION – STAGES – SD, DD, CD + SITE SUPERVISION

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy