Open side-bar Menu
 ArchShowcase

Archive for the ‘Vectorworks’ Category

Bridgehampton House in New York by Resolution: 4 Architecture

Friday, March 6th, 2020

Article source: Resolution: 4 Architecture

This custom modular home was designed to leverage existing prefabrication methods by working within factory limits to efficiently produce a home specific to the client and the site. Here, the client’s brief called for a casual, light-filled summer retreat, centered on maintaining a fluid indoor-outdoor connection with exterior spaces for lounging, playing, and entertaining.

While the house is larger than the nearby cottages, it was important to the clients to be a good neighbor. So, the main level is broken into two smaller volumes and clad in weathered gray cedar. Without a formal front door, a welcoming tree-lined autocourt leads to an entry deck. This covered deck is created by a spanning second story that defines the threshold between public and private.

Image Courtesy © Resolution: 4 Architecture

  • Architects: Resolution: 4 Architecture
  • Project: Bridgehampton House
  • Location: New York, USA
  • Software used: Vectorworks, SketchUp
  • Other Participants:
    • Modular Manufacturer: Simplex Homes
    • HVAC Consultant: High Velocity Helper LLC
    • Custom Millwork: Kountry Kraft
  • Gross Built Area: 7,360 SF
  • Completion Year: 2018

(more…)

Clare County Library in Ennis, Ireland by keith williams architects

Friday, February 28th, 2020

Article source: keith williams architects

Construction has started on the new Clare County Library in Ennis, Co Clare, in south-west Ireland.

Designed by Keith Williams Architects, the new 2,300m2 project for client Clare County Council has been conceived as a new cultural hub for the town and the region. It will abut the town’s existing Glór Theatre (2001) adding the new County Library and a small contemporary Art Gallery.

Image Courtesy © keith williams architects

  • Architects: keith williams architects
  • Project: Clare County Library
  • Location: Ennis, Ireland
  • Software used: Autocad, Vectorworks
  • Client: Clare County Council, Social Development Directorate, Library Services
  • The Team working with Keith Williams Architects on the project include

    • ARUP: Structural and Civil Engineers
    • AxisEng: MEP Engineer
    • AECOM: Cost Consultancy
    • OLM: PSDP
    • Keating: Main Contractor

(more…)

Triptych House in Winchester, England by Paul Cashin Architects

Thursday, February 13th, 2020

Article source: Paul Cashin Architects

Triptych House is a Grade II Listed dwelling in Winchester, Hampshire. The property is one of a row of terraced dwellings that are annexed to a large 18th Century manor house.

The property has a modest and unassuming appearance from the roadside. Prior to the renovation and extension, much of the interior of the property felt like a typical home.

Image Courtesy © Richard Chivers

  • Architects: Paul Cashin Architects
  • Project: Triptych House
  • Location: Winchester, Hampshire, UK
  • Photography: Richard Chivers
  • Software used: SketchUp, Photoshop, Vectorworks
  • Interior Designer: Studio Hooton
  • Contractor: Lex Projects
  • Structural Engineer: WRD Engineers
  • Area: Extension – 50m2, Renovation -110m2
  • Completion Year: 2019

(more…)

Bambu Desserts and Drinks in California by Diebel and Company | Architects

Wednesday, January 29th, 2020

Article source: Diebel and Company | Architects

Bambu Shoppe is and dessert and drink restaurant located along historic El Camino Real, which dates to California’s Spanish colonial past. It is a counter-service cafe for Chè, a Vietnamese word for home-made beverages, dessert drinks, and puddings. Bambu Shoppe Chè is made to order using daily prepared, fresh, colorful, and nutritious ingredients.

The space was originally built in the early 1900s, features 14-foot high ceilings, a glass facade with bar seating, and concrete floors. The interior architecture is clean, minimalist, and inviting. The architects inserted into the light-filled dining space, a warm wood slat wall that curves to the ceiling. The space is calm and serene. Its restrained color palette is a foil to the naturally colorful food ingredients.

Image Courtesy © Kevin Ng Photography

  • Architects: Diebel and Company | Architects
  • Project: Bambu Desserts and Drinks
  • Location: California, USA
  • Photography: Kevin Ng Photography
  • Software used: Vectorworks
  • Architectural Design: Gary Diebel, AIA Architect
  • Visualization: Richard Jenkins, Architect
  • Structural Engineers: Taeho Um & Associates
  • MEP Engineers: Optimized Energy & Facilities Consulting (OEFC)
  • General Contractor: Yama Construction, LLC

(more…)

Hara house in Nagaoka, Japan by Takeru Shoji Architects.Co.,Ltd.

Monday, January 13th, 2020

Article source: Takeru Shoji Architects.Co.,Ltd.

Hara house is located in the agricultural village of Tsurugasone, formerly known as Nakanoshima, in Nagaoka city, Niigata prefecture. The village is in the conventional Japanese village style wherein, a single estate contains an assemblage of buildings and farmland, that are inter-dependent on each other. This village is facing the same problems that many of Japan’s villages are facing; a rural decline, where new self-contained buildings superimpose themselves onto the land and create a larger and larger separation between the residents.

Eventually, the clients will inherit their large family estate which similarly, already has many built structure upon it such as the main family house, a work shed, parking area and a green house. Thus in this setting, our design direction was to create a building that revitalizes the structures already present onsite and have the potential to adapt to new functions as the need or mood arises.

Image Courtesy © Isamu Murai

  • Architects: Takeru Shoji Architects.Co.,Ltd.
  • Project: Hara house
  • Location: Nagaoka, Japan
  • Photography: Isamu Murai
  • Software used: Vectorworks
  • Project Architect: Takayuki Shimada(Takeru Shoji Architects.)
  • Structural Design: Tetsuya Tanaka(Tetsuya Tanaka Structural Engineers)
  • Contractor: Hirokatsu Yokoo(Yoshihara Gumi)
  • Total Floor Area: 166.24 sqm(including carport)
  • Completion: Feb.2019

(more…)

Residential complex TROGERSTRASSE Munich in Germany by Landau + Kindelbacher Architects

Thursday, January 9th, 2020

Article source: Landau + Kindelbacher Architects

Two new apartment buildings enclosing a shared inner courtyard are being constructed in a partly landmarked environment near Prinzregentenstrasse and the Friedensengel at the centre of the suburbs Haidhausen and Bogenhausen. On the Trogerstrasse side, the front building carefully closes the existing gap in the block edge and shows formal consideration for the landmarked environment. This is reflected by the saddleback roof, two bay windows towards the street, a plinth, and a classically graceful design language. The various elements create a balance between the individuality of the building and the adjacent neighbourhood of the square.

Image Courtesy © Landau + Kindelbacher Architects

  • Architects: Landau + Kindelbacher Architects
  • Project: Residential complex TROGERSTRASSE Munich
  • Location: Munich, Germany
  • Software used: Vectorworks
  • Developer: Legat Living GmbH
  • Front Building: 17 apartments
  • Rear Building: 9 apartments, With two-storey underground garage
  • Start of Construction: 2015
  • Date of Completion: 2018

(more…)

Department store Vroom & Dreesmann in Amsterdam, The Netherlands by Office Winhov

Sunday, January 5th, 2020

Article source: Office Winhov

The historic department store of Vroom & Dreesmann forms a beacon for the center of Amsterdam. The complex between the Rokin and Kalverstraat consists of a combination of different buildings which have been renovated several times over the past hundred years. Office Winhov aimed to unravel this condition of rich stratification, bringing back the original qualities of the buildings while respecting the different styles of renovation. A few new elements have been added which make a more varied program for the complex possible.

Image Courtesy © Stefan Müller

  • Architects: Office Winhov
  • Project: Department store Vroom & Dreesmann
  • Location: Kalverstraat/Rokin, Amsterdam
  • Photography: Stefan Müller, Wijnanda Duits
  • Software used: Vectorworks, SketchUp
  • Design team: Uri Gilad, Carlo van Steen, Inez Tan, Rutger van der Meer
  • Monumentale Status: La Place gebouw, zijde Rokin nr 158, 160 en 162, 18e eeuwse pakhuizen (rijksmonument)
  • Client Vision Assignment: IEF Real Estate
  • Client Building Contract: IEF Real Estate
  • Former V&D Building: 8700 m2
  • La Place Building: 2450 m2

(more…)

Forrest Street Alterations & Additions in Fremantle, Australia by Philip Stejskal Architecture

Thursday, December 5th, 2019

Article source: Philip Stejskal Architecture

Our clients came to us with a typical Fremantle weatherboard cottage from the 1920, they wanted to remove the 1950s lean to structure and add a substantial renovation

In early design conversations with our clients they noted a difference in their personalities, one an introvert the other an extrovert. To Marty, home was a backdrop for entertaining and about being around friends and family. Whilst for Soo home was a sanctuary where she could find space and time for solitude and an escape from the corporate Monday to Friday environment. It also needed to fulfil their needs as a young family.

Image Courtesy © Bo Wong

  • Architects: Philip Stejskal Architecture
  • Project: Forrest Street Alterations & Additions
  • Location: Fremantle, Australia
  • Photography: Bo Wong
  • Software used: Vectorworks, SketchUp

(more…)

Agrela House in Paredes, Portugal by spaceworkers

Friday, November 29th, 2019

Article source: spaceworkers

A house for books. This challenge started with a premise from the client: space for many books.

Immediately, our imaginary guided us to the many classical renaissance libraries, with sliding stairs that reach the book mountain. That was the motto of the intervention: a high space capable of generate the composition and hierarchize interior spaces.

The ideia was growing and the volumetric experience led to the functional differentiation of the interior spaces, crating a roof as a restless mass with different heights. The roof also figures itself in a fifth facade and influences the idealization of the other ones.

Image Courtesy © FG+SG®

  • Architects: spaceworkers (Marco Santos, Marta Silva, Mónica Pacheco, Tiago Maciel)
  • Project: Agrela House
  • Location: Paredes, Portugal
  • Photography: FG+SG®
  • Software used: Vectorworks, Rhinoceros and Cinema 4D
  • Principal architects: Henrique Marques, Rui Dinis
  • Finance Director: Carla Duarte – cfo
  • Engineer: Simetria Vertical
  • Author: spaceworkers®
  • Code: 14CDA
  • Size: 365m2
  • Project Year: 2014-2018

(more…)

Renovation • P.NT2 in Brussels, Belgium by BOB361 architecten

Friday, November 29th, 2019

Article source: BOB361 architecten

Transformation of a former orfevery towards an environment for habitation and work. One day the site was silted up. Due to partial demolitions, it obtained a larger permeability which means that each of the spaces was provided with plenty of air and light. This allows the transformation into live and working spaces. The redevelopment contains a privacy gradient between public boulevard, semi- public courtyards, private lofts and gardens.

Image Courtesy © A.Nullens

  • Architects: BOB361 architecten
  • Project: Renovation • P.NT2
  • Location: Brussels, Belgium
  • Photography: MF.Plissart, A.Nullens, A.Nullens
  • Software used: Vectorworks

(more…)




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise