Open side-bar Menu
 ArchShowcase

Archive for the ‘Rhino’ Category

Stack House in Minneapolis, Minnesota by Lazor Office

Tuesday, January 30th, 2018

Article source: Lazor Office 

The Stack House is essentially a stack of blocks. Solid blocks of private spaces are stacked in an open, laced pattern to form voids for shared living space. The blocks are positioned in response to the urban and natural setting in relation to the site. The result is an open, two-story void of shared space that is simultaneously protected for privacy and immersed in its natural surroundings. Contrasting materials express this stacking and shifting on the exterior. Inside, the blocks are carefully carved with curves and surfaced in white oak to shape more intimate spaces to join a family together to share a meal, to recline, read and take in the majestic oak outside, or to play the piano and fill the void with music.

Image Courtesy © Lazor Office

  • Architects: Lazor Office
  • Project: Stack House
  • Location: Minneapolis, Minnesota
  • Software used: SketchUp, Autocad, Revit, Rhino
  • Completion Date: 2016

(more…)

[Gol]Khaneh in Alborz, Iran by SHABOFFICE

Tuesday, January 23rd, 2018

Article source: SHABOFFICE

[GOL]KHANEH is located on the outskirts of the city of Karaj, about 60km west of Tehran. It is designed and built as a vacation home for a family of 6.

Two adjacent but separate plots – each about 5000 square meters – form the site for this project. One of the plots was thick with old fruit trees while the other, adjacent to a noisy street with a chaotic line of low-rise residential buildings, was dry and barely had any trees because of a previous fire. Therefore, the plot with few trees and vegetation was chosen as the building site and creating a buffer to maximize privacy and limit views and noise transfer from the neighbouring street to the site quickly became a priority in design.

Image Courtesy © Ava Dehghani

  • Architects: SHABOFFICE
  • Project: [Gol]Khaneh
  • Location: Alborz, Iran
  • Photography: Parham Taghiof, Ava Dehghani
  • Software used: Rhino, Grasshopper
  • Project and Construction Management: Shabnam Hosseini
  • Team: Hamish Rhodes, Somayeh Derakhshan, Sarvenaz Dadgar
  • Representation and Graphics: Ava Dehghani
  • Structural Design: Sarvin Sazeh
  • Mechanical Consultant: Ali Ghanizadeh
  • Electrical Consultant: Ali Piltan
  • Mechanical & Electrical Contractor: Behzad Pourshab
  • Landscape Contractor: Hamid Darian

(more…)

Susuru in New South Wales, Australia by Prevalent

Friday, January 5th, 2018

Article source: Prevalent

Situated in a prominent building from 1906, SUSURU Ramen and Gyoza bar enlivens the façade and street it rests on. Working closely with the City Council, the design breaks away from the traditional mining aesthetic typical of the area. As the city grows and develops, it attracts more foreign attention, whom don’t necessarily have the same rapport with what was largely a mining town many years ago. The SUSURU restaurant is for the newcomers, for those visiting, and most importantly, for those long term residents wanting to see the city develop and diversify.

Image Courtesy © Jan Vranovsky

  • Architects: Prevalent
  • Project: Susuru
  • Location: 140 King Street, Newcastle, NSW, 2300, Australia
  • Photography: Jan Vranovsky
  • Software used: Revit, Rhino and 3dS Max
  • Lead Architects: Ben Berwick
  • Gross Built Area (square meters or square foot): 250sqm
  • Completion Year: 2017

(more…)

The Fleming Hotel in Wan Chai, Hong Kong by A Work of Substance

Wednesday, December 27th, 2017

Article source: A Work of Substance 

A Work of Substance was tasked to redesign and rebrand The Fleming Hotel, originally opened in 2006. A new take on the architecture, interior, products, and identity transformed The Fleming into a 66-room boutique hotel that is a true reflection of Hong Kong. Occupying a building from the 70s’, the hotel stands in Wan Chai close to Victoria Harbour front. The multilayered design concept draws inspiration from the location and history, leveraging Hong Kong’s maritime heritage and 70s’ industrial era to create a cultural, social and efficient character. One landmark that embodies these three elements is the Star Ferry — having connected people across the harbour for over a century, it is a piece of Hong Kong’s collective memory and identity. The Star Ferry, a unique and elegant icon of Hong Kong’s past and present, became the foundation for every design detail, including the custom designed furniture and lighting. Nostalgia is further evoked by colours and scents: Carmine reds and bottle greens — hues seen on the hull of Hong Kong’s ferries, fishing boats, delivery trucks, and temples —and apothecary-inspired toiletries and custom aroma of sandalwood and amber notes, to deliver an authentic sense of place.

Image Courtesy © Dennis Lo

  • Architects: A Work of Substance
  • Project: The Fleming Hotel
  • Location: 41 Fleming Road, Wan Chai, Hong Kong
  • Photography: Dennis Lo
  • Software used: Autocad, SketchUp, Photoshop, 3dS Max, Rhino
  • Construction Area: approx. 3382 m²
  • Renovation timeline: 1 year
  • Completion date: September 2017

(more…)

Surfboard House in Queens, New York by BFDO Architects

Thursday, November 23rd, 2017

Article source: v2com

Five years after Hurricane Sandy devastated the cooperative beachfront community of Breezy Point, Queens, the project built upon a lot that had been reduced to sand is complete. Houses in Breezy Point are set close together and linked by pedestrian paths; cars are confined to lots at the periphery. The client’s site was unusually wide, with 68 feet of south-facing beach frontage. Flood regulations required building at least six feet off of the ground, while co-op regulations put the maximum building height at 28 feet. The co-op also required a setback from the lot line of 32 feet at the lot’s widest point. The resulting building envelope was much shallower than wide, allowing nearly every room to have an ocean view. One of the primary design strategies was stepping the south-facing facade to allow windows to wrap corners. That created diagonal sightlines up and down the beach, framing vistas and visually expanding the interior spaces. Angled roof profiles and ceiling finishes also direct the eye upward and outward.

Image Courtesy © Francis Dzikowski/OTTO

  • Architects: BFDO Architects
  • Project: Surfboard House 
  • Location: Queens, New York
  • Photography: Francis Dzikowski/OTTO
  • Software used: Rhino, Autocad

(more…)

Tilt-Shift House in Los Angeles, CA by ANX / Aaron Neubert Architects, Inc.

Thursday, November 9th, 2017

Article source: ANX / Aaron Neubert Architects, Inc.

The project site for this 2,100 sf residence is a 3,750 sf ascending northwesterly facing parcel with panoramic views towards Los Angeles’ Silver Lake Hills and Reservoir. The residence is situated adjacent to multiple significant mid-century modern homes, including William Kesling’s Vanderpool and Wilson Houses, and the Allyn Morris cantilevered duplex. Due to the adjacency of these neighboring properties and the lack of natural open space available as a result of the limited size and extreme slope of the site, a series of plan shifts were generated to create numerous exterior living spaces within the volume of the residence.

Image Courtesy © Brian Thomas Jones and Alex Zarour

  • Architects: ANX / Aaron Neubert Architects, Inc.
  • Project: Tilt-Shift House
  • Location: Los Angeles, CA
  • Photography: Brian Thomas Jones and Alex Zarour
  • Software used: Rhino, Autocad
  • Project Team: Aaron Neubert (Principal), Jeremy Limsenben, Xiran Zhang, Jina Seo
  • Structural Engineer: Craig Phillips Engineering

(more…)

Bankstown Garden in Australia by Tony Owen Partners

Thursday, November 9th, 2017

Article source: Tony Owen Partners

Bankstown Gardens is a 9 storey signature apartment development consisting of 54 units, landscaped garden setting. The site is close to Bankstown CBD, so it is on the door step of schools, restaurants and shops as well as bus, railway and transport facilities.

Image Courtesy © Tony Owen Partners

  • Architects: Tony Owen Partners
  • Project: Bankstown Garden
  • Location: Bankstown, Australia
  • Software used: Rhino

(more…)

Cross Street Bankstown in Australia by Tony Owen Partners

Wednesday, November 8th, 2017

Article source: Tony Owen Partners 

Bankstown Gardens is a 9 storey signature apartment development consisting of 54 units, in a landscaped garden setting.

The building is located on a prominent corner in Sydney’s Bankstown. The building is curved at the corner to reinforce the corner and present as a gateway in the streetscape. The dynamic design utilises a framework of sun control fins to create an exciting frieze on the façade. The diagonal geometry articulates the façade whilst allowing for large expanses of glazing and external planter devices. The transparency of this material is juxtaposed with the lightness of the white screens to create a vibrant and light façade.

Image Courtesy © Tony Owen Partners

  • Architects: Tony Owen Partners
  • Project: Cross Street Bankstown
  • Location: Sydney’s Bankstown, Australia
  • Software used: Maya, Rhino, Autocad, Revit

(more…)

Stones Gambling Hall in Citrus Heights, California by CCS ARCHITECTURE

Sunday, October 22nd, 2017

Article source: CCS ARCHITECTURE

Stones is a 25,450 square foot gambling hall, restaurant, and bar – in essence a boutique casino.  The building is an expansion and total renovation of a former Salvation Army warehouse that had been vacant for years, and is the first project of this kind to combine and relocate two existing card room licenses under one roof. Citrus Heights is a small city sixteen miles east of Sacramento – within California’s Central Valley.

Image Courtesy © Paul Dyer

  • Architects: CCS ARCHITECTURE
  • Project: Stones Gambling Hall
  • Location: 6508/6510 Antelope Road in the Antelope Crossing Shopping District, Citrus Heights, CA 95621, USA
  • Photography: Paul Dyer
  • Software used: Autocad, SketchUp, Rhino
  • Owner: The Monarch Group
  • Design Principal: Cass Calder Smith
  • Project Architect: Andre Krause
  • Interior Design Director: Barbara Turpin-Vickroy
  • Project Manager: Bryan Southwick
  • Designers: Eric Olson, Nathan Reed
  • Structural Engineer: Yadegar Associates, San Francisco CA

(more…)

Minima | Maxima in Astana, Kazakhstan by MARC FORNES / THEVERYMANY

Tuesday, October 10th, 2017

Article source: MARC FORNES / THEVERYMANY

Why, among visitors of all ages, does it seem instinctive to engage the structure playfully? For instance, to tuck one’s body inside a pleat at the base, assuming a contorted curved form that matches the structure itself. To be inside Minima | Maxima is to be transported to a strange, future, science fiction world, removing us from ourselves and finding within a sense of naive wonder. The project is radically different than the built environments we know. The impulse is to explore, to visually wander. Transformed into a childlike state, visitors can do so without the pretense of reference or concepts, employing instead the potent investigative powers of our senses.

Image Courtesy © NAARO

  • Architects: MARC FORNES / THEVERYMANY
  • Project: Minima | Maxima
  • Location: Astana, Kazakhstan
  • Photography: NAARO
  • Software used: Rhino, Grasshopper
  • Dimensions: 43’ H x 30′ W x 30′ D

(more…)

Canon: oce crystalPoint
Bentley: Top 5 Reasons
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise