Archive for the ‘Rhino’ Category
Thursday, February 14th, 2013
Article source: JOHO Architecture
There is no home for parking
I remember that it was a winter day after snowing when I first visited the site. It was a rare residential lot with an open view to the south at the dead end of a small path beneath Mt. Gwanggyo. What was unique about this lot was that it was very hard to turn the car to come out of the path after more than 2 cars parked, because it was a small path only 4 m in width. Ironically, the fundamental challenge was not only solving the parking problem but also creating a space for both parking and gardening to coexist.
Image Courtesy © Sun Namgoong
- Architects: JOHO Architecture
- Project: The Curving House
- Location: 678-2, Sinbong-dong, Suji-gu, Yongin-si, Gyeonggi-do, Korea
- Photography: Sun Namgoong
- Architect: Jeonghoon LEE
- Design Team: JOHO Architecture(Il-Sang Yoon, Gae-hee Cho)
- Use: Housing
- Completion: 2012.10
- Construction: Dong-jin Chea(DL donglim construction)
- Client: Im-jeong Choi
- Material: Exposed Concrete + Ash-colored Brick + STS panel(mirror type)
- Site area: 529.00 sqm
- Building area: 140.57 sqm
- Building to land ratio: 26.57% (<40%)
- Floor area ratio: 35.22% (<100%)
- Building scope: 3F
- Software used: Rhino & AutoCAD
Saturday, February 9th, 2013
Article source: Tony Owen Partners
The new Danks & Bourke commercial building is a refurbishment of a 1960’s concrete furniture warehouse. It is located in the former industrial area of Danks Street, which has lately become a trendy hub for the designer commercial set. The triple-frontage building contains 5,000sqm of office space over two levels, a supermarket and specialty retail stores on the ground floor.
Image Courtesy Tony Owen Partners
- Architects: Tony Owen Partners
- Project: Danks and Bourke
- Location: Danks Street, Sydney, Australia
- Software used: Autocad, Revit, 3-D Studio Max, Maya and Rhino
Wednesday, February 6th, 2013
Article source: Rafael Vinoly Architects
Rafael Vinoly Architects is proud to announce that the University South Carolina celebrated the â€œTopping Outâ€ of the new building for the Darla Moore School of Business in a ceremony today held at the construction site. The Darla Moore School of Business, globally renowned for its international business program, has until now been housed in a 1970s-era building located near the universityâ€™s historic Horseshoe, site of the original campus established in 1801. The new buildingâ€”designed by Rafael ViÃ±oly Architects and commissioned by alumna and namesake Darla Moore through a $70 million donationâ€”will provide an environment well suited to answer the challenges of a 21st century business school.
Image Courtesy Rafael Vinoly Architects
- Architects: Rafael Vinoly Architects
- Project: Darla Moore School of Business, University
- Location: Columbia, South Carolina
- Software used: Rhino and Autocad
Wednesday, February 6th, 2013
Article source: ENOTA Architects
The Podčetrtek Traffic Circle is built on a regional road located between the municipal sports hall with open-air sports grounds on one side and a spa centre with numerous swimming pools and hotels on the other side. It is primarily intended to slow down the traffic in this consequently very busy area as the main accesses to both complexes also connect to the traffic circle. The design of the roundabout’s central island thus references the appearance of both facilities and marks the entrance points to the destinations of the visitors to either of the programme centers.
Image Courtesy Miran Kambič
- Architects: ENOTA Architects
- Project: Podčetrtek Traffic Circle
- Location: Podčetrtek, Slovenia
- Photography: Miran Kambič
- Type: Commission
- Year: 2012
- Status: Completed 2012
- Size: 380 m2
- Budget: 33.000 EUR
- Client Terme Olimia
- Project team: Dean Lah, Milan Tomac, Alja Černe, Tjaž Bauer
- Software used: AutoCAD and Rhino-grasshopper
Tuesday, February 5th, 2013
Article source: CEBRA
One of Grundfos Dormitory’s remarkable characteristics is providing student housings in the heart of Aarhus’ new harbour front development – that is, a low cost residential building on a very attractive site. Like many other industrial harbor fronts, the former container port of Aarhus is being transformed into a dynamic new neighborhood. Grundfos Dormitory is one of the first finished projects in the area that on completion will be home to 7,000 inhabitants and provide 12,000 workplaces. Its total site area amounts to 800,000 m2 making this development one of Europe’s largest harbor front city developments.
Image Courtesy Mikkel Frost
- Architects: CEBRA
- Project: Grundfos Dormitory
- Location: Grethe Løchtes Gade, Aarhus, DK
- Commission: Private
- Type: Turnkey contract
- Category: Residential
- Client: Engineering College of Aarhus
- Software used: AutoCAD, Revit, Rhinoceros, VRay for Rhinoceros, Adobe Photoshop and Illustrator
Tuesday, January 29th, 2013
Article source: RA Architectural & Design Studio
The new Eco-resort of Parque de Pedras Salgadas, Portugal, consists of a set of seven small houses in perfect harmony with the surrounding outstanding nature.
Designed in a modular prefabrication system but flexible to adapt to the specific places within the park, these houses result in several different combinations of the same three modules (entrance/bathing – living – sleeping) creating different morphologies and different dialogues with the surrounding nature, wisely occupying the empty spaces between the trunksof large trees and, at the same time, allowing each home to be unique, special and worth visiting.
Image Courtesy FG + SG
- Architects: RA Architectural & Design Studio
- Project: Pedras Salgadas Eco-Resort
- Location: Pedras Salgadas, Portugal
- Architects: Luís Rebelo de Andrade & Diogo Aguiar
- Collaborators: Madalena Rebelo de Andrade, Raquel Jorge, João Jesus
- Project Area: 1 EcoHouse — 52,92 m2 \ 12 EcoHouse2 — 635,04 m2
- Client: UNICER
- Constructor: Modular System
- Photographs: FG + SG
- Software used: ArchiCAD & Rhino
Sunday, January 27th, 2013
Article source: NL Architects
Qube is a commission for an office building in Amsterdam. Qube is part of a development called IJpunt by G&S Vastgoed. IJpunt will consist of four blocks designed by Claus en Kaan, Dedato, MVSA and NL A.
The site is truly unique: the most western corner of the Minervahaven, overlooking the Mercuriushaven and the river IJ. Well connected to both the city center as the rest of the world, both by car, public transport and bike.
Image Courtesy NL Architects
- Architects: NL Architects
- Project: Qube
- Location: IJpunt, Minervahaven, Amsterdam, Netherlands
- Nl Architects: Pieter Bannenberg, Walter Van Dijk, Kamiel Klaasse
- Team: Arne Van Wees With: Giulia Pastore, Gen Yamamoto, Gert Jan Machiels
- Qube: Office Building, Ijpunt,Minervahaven, Amsterdam 2012 – 201?
- Client: G&S Vastgoed
- Size: Gross Floor Area 6560m², Net Floor Area 5940m², Plot 2430m²
- Structural Engineers: Van Der Vorm
- Installations: Wichers & Dreef
- Software used: Autocad, Rhino 3D, 3dS Max, Adobe Illustrator
Friday, January 18th, 2013
Article source: Mikou Design Studio
This new building is a remarkable amenity in the city centre, visible by its façades and its roof, a founding element of the project. We designed it to be both welcoming and protective, turned inwards towards inner courtyards to ensure privacy.
Building’s aerial view : Image Courtesy Florian Kleinfenn
- Architects: Mikou Design Studio
- Project: Bobigny School Complex
- Location: Bobigny, Paris, France
- Program: Pre-school, Primary School, Sports And Recreation Center, Library
- Client: City of Bobigny
- Surface: 5 000 m²
- Date: Completion septembre 2012
- Photo Credits: Florian Kleinfenn
- Software used: Autocad LT 2011, Rhinoceros, Adobe Photoshop, Adobe Illustrator
Wednesday, January 16th, 2013
Article source: Brooks + Scarpa with KZF Design Studio
Brooks + Scarpa and KZF Design Studio have released their proposal for the new Interfaith Chapel at the University of North Florida in Jacksonville, FL The proposed 7000 square foot Interfaith Chapel is designed to be a special place where students and others can slow down their lives, re-focus on their spiritual needs and reflect. At the same time, the Chapel will support a variety of diverse religious services, student ceremonies, weddings, other intimate events, lectures, meditative practices and musical performances.
Image Courtesy Brooks + Scarpa with KZF Design Studio
- Architects: Brooks + Scarpa with KZF Design Studio
- Project: Interfaith Chapel at the University of North Florida
- Location: Florida, U.S.A.
- Software used: Rhino, Photoshop and AutoCAD
Saturday, January 12th, 2013
Article source: Studio North
Camp at Cabot Beach is designed to address the needs of children between the ages of 8-17 who are living in families that have been affected by chronic illness or disability. The camp was established 5 years ago and runs for 3 weeks every August. In 2009 they needed new facilities.
Frontview : Image Courtesy © Matthew Kennedy
- Architects: Studio North
- Project: Camp at Cabot Beach
- Location: Malpeque, Prince Edward Island
- Photography: Matthew Kennedy
- Collaborators: Clayton Blackman, Andrew Choptiany, Sam Lock
- Area: 3,900sq.ft.
- Completed: 2009
- Software used: Designed the camp by hand, drawings and modeling using rhino; also used illustrator for diagrams and lineweights.