Open side-bar Menu
 ArchShowcase

Archive for the ‘Rhino’ Category

Sauna at Box in Finnish Archipelago, Finland by Architects Rudanko Kankkunen

Thursday, February 21st, 2013

Article source: Architects Rudanko Kankkunen

In summer 2011, we bathed for the first time in the newly finished sauna of Box. Box is a fishermen’s village located in south-western archipelago of Finland. We are working on the conversion of the former Box village school into a residence, and the first part of the project was to build a sauna into the school’s old storage and toilet building by the seashore.

Image Courtesy Architects Rudanko + Kankkunen 

  • Architects: Architects Rudanko Kankkunen
  • Project: Sauna at Box
  • Location: Box, Finnish Archipelago, Finland
  • Year: 2011
  • Client: private
  • Status: realized
  • Use: sauna, dressing room, storage and terrace
  • Floor area: 56 m2
  • Software used: Archicad and Rhino

23 Local Authority Housing in Paris, France by Avignon-Clouet Architectes

Thursday, February 21st, 2013

Article source: Avignon-Clouet Architectes

There are two buildings situated n°42-48 “Rebière” street. It includes 23 accommodations: G+3 Duplex (7 units) and G+8 (16 units + 1 association premises of 80 m2). These two separate entities surround two other buildings designed by the agency “Atelier Provisoire” from Bordeaux. The buildings are connected through exterior walkways. The selected urban location allows to create one of the only ground floor with garden, on the whole construction project of “Rebière” street.

Image Courtesy © Stéphane Chalmeau 

  • Architects: Avignon-Clouet Architectes
  • Project: 23 Local Authority Housing
  • Location: Paris, France
  • Photography: Stéphane Chalmeau
  • Software used: AutoCAD, Rhino, 3dS Max

Bularnia in Krakow, Poland by BudCud

Wednesday, February 20th, 2013

Article source: BudCud

Bularnia is an honest, functional office space on the ground floor of postindustrial building on the outskirts of Cracov. The goal was to introduce more natural light to dark and overpowering interior. This move redefined new proportions of space and optically enlarged narrow and low room. What’s more, light and transparent finishing materials, such as glass, delicate steel mesh and perforated boards were used to emphasize the openness of new office space.

Image Courtesy © Kamila Kozińska 

  • Architects: BudCud
  • Project: Bularnia
  • Location: ul. Bularnia 5, 31-222 Kraków, Poland
  • Photography: Kamila Kozińska (1-3, 5-11), Agata Kadenacy (4,12)
  • Authors: BudCud ( Mateusz Adamczyk, Agata Woźniczka), Maria Schoen
  • Function: office space – accounting
  • Client: ASPEN S.A.
  • Usable area: 175 m2
  • Volume: 533 m3
  • Project Year: 2010
  • Completed: 2012
  • Software used: Autocad, Rhinoceros, SketchUp, Photoshop and Illustrator, as well as physical models.

The Curving House in Gyeonggi-do, Korea by JOHO Architecture

Thursday, February 14th, 2013

Article source: JOHO Architecture

There is no home for parking

I remember that it was a winter day after snowing when I first visited the site. It was a rare residential lot with an open view to the south at the dead end of a small path beneath Mt. Gwanggyo. What was unique about this lot was that it was very hard to turn the car to come out of the path after more than 2 cars parked, because it was a small path only 4 m in width.  Ironically, the fundamental challenge was not only solving the parking problem but also creating a space for both parking and gardening to coexist.

Image Courtesy © Sun Namgoong 

  • Architects: JOHO Architecture
  • Project: The Curving House
  • Location: 678-2, Sinbong-dong, Suji-gu, Yongin-si, Gyeonggi-do, Korea
  • Photography: Sun Namgoong
  • Architect: Jeonghoon LEE 
  • Design Team: JOHO Architecture(Il-Sang Yoon, Gae-hee Cho) 
  • Use: Housing 
  • Completion: 2012.10 
  • Construction: Dong-jin Chea(DL donglim construction) 
  • Client: Im-jeong Choi 
  • Material: Exposed Concrete + Ash-colored Brick + STS panel(mirror type) 
  • Site area: 529.00 sqm 
  • Building area: 140.57 sqm 
  • Building to land ratio: 26.57% (<40%) 
  • Floor area ratio: 35.22% (<100%)
  • Building scope: 3F
  • Software used: Rhino & AutoCAD

Danks and Bourke in Sydney, Australia by Tony Owen Partners

Saturday, February 9th, 2013

Article source: Tony Owen Partners 

The new Danks & Bourke commercial building is a refurbishment of a 1960’s concrete furniture warehouse. It is located in the former industrial area of Danks Street, which has lately become a trendy hub for the designer commercial set. The triple-frontage building contains 5,000sqm of office space over two levels, a supermarket and specialty retail stores on the ground floor.

Image Courtesy Tony Owen Partners 

  • Architects: Tony Owen Partners 
  • Project: Danks and Bourke
  • Location: Danks Street, Sydney, Australia
  • Software used: Autocad, Revit, 3-D Studio Max, Maya and Rhino

Darla Moore School of Business, University in Columbia, South Carolina by Rafael Vinoly Architects

Wednesday, February 6th, 2013

Article source: Rafael Vinoly Architects

Rafael Vinoly Architects is proud to announce that the University South Carolina celebrated the “Topping Out” of the new building for the Darla Moore School of Business in a ceremony today held at the construction site. The Darla Moore School of Business, globally renowned for its international business program, has until now been housed in a 1970s-era building located near the university’s historic Horseshoe, site of the original campus established in 1801. The new building—designed by Rafael Viñoly Architects and commissioned by alumna and namesake Darla Moore through a $70 million donation—will provide an environment well suited to answer the challenges of a 21st century business school.

Image Courtesy Rafael Vinoly Architects  

  • Architects: Rafael Vinoly Architects
  • Project: Darla Moore School of Business, University 
  • Location: Columbia, South Carolina
  • Software used: Rhino and Autocad

Podčetrtek Traffic Circle in Podčetrtek, Slovenia by ENOTA Architects

Wednesday, February 6th, 2013

Article source: ENOTA Architects

The Podčetrtek Traffic Circle is built on a regional road located between the municipal sports hall with open-air sports grounds on one side and a spa centre with numerous swimming pools and hotels on the other side. It is primarily intended to slow down the traffic in this consequently very busy area as the main accesses to both complexes also connect to the traffic circle. The design of the roundabout’s central island thus references the appearance of both facilities and marks the entrance points to the destinations of the visitors to either of the programme centers.

Image Courtesy Miran Kambič 

  • Architects: ENOTA Architects
  • Project: Podčetrtek Traffic Circle
  • Location: Podčetrtek, Slovenia
  • Photography: Miran Kambič 
  • Type: Commission 
  • Year: 2012 
  • Status: Completed 2012 
  • Size: 380 m2 
  • Budget: 33.000 EUR 
  • Client Terme Olimia 
  • Project team: Dean Lah, Milan Tomac, Alja Černe, Tjaž Bauer
  • Software used: AutoCAD and Rhino-grasshopper

Grundfos Dormitory in Aarhus, DK by CEBRA

Tuesday, February 5th, 2013

Article source: CEBRA

One of Grundfos Dormitory’s remarkable characteristics is providing student housings in the heart of Aarhus’ new harbour front development – that is, a low cost residential building on a very attractive site. Like many other industrial harbor fronts, the former container port of Aarhus is being transformed into a dynamic new neighborhood. Grundfos Dormitory is one of the first finished projects in the area that on completion will be home to 7,000 inhabitants and provide 12,000 workplaces. Its total site area amounts to 800,000 m2 making this development one of Europe’s largest harbor front city developments.

Image Courtesy Mikkel Frost

  • Architects: CEBRA
  • Project: Grundfos Dormitory
  • Location: Grethe Løchtes Gade, Aarhus, DK
  • Commission: Private
  • Type: Turnkey contract
  • Category: Residential
  • Client: Engineering College of Aarhus
  • Software used: AutoCAD, Revit, Rhinoceros, VRay for Rhinoceros, Adobe Photoshop and Illustrator
    (more…)

Pedras Salgadas Eco-Resort in Portugal by RA Architectural & Design Studio

Tuesday, January 29th, 2013

Article source: RA Architectural & Design Studio

The new Eco-resort of Parque de Pedras Salgadas, Portugal, consists of a set of seven small houses in perfect harmony with the surrounding outstanding nature.

Designed in a modular prefabrication system but flexible to adapt to the specific places within the park, these houses result in several different combinations of the same three modules (entrance/bathing – living – sleeping) creating different morphologies and different dialogues with the surrounding nature, wisely occupying the empty spaces between the trunksof large trees and, at the same time, allowing each home to be unique, special and worth visiting.

Image Courtesy FG + SG

  • Architects: RA Architectural & Design Studio
  • Project: Pedras Salgadas Eco-Resort
  • Location: Pedras Salgadas, Portugal
  • Architects: Luís Rebelo de Andrade & Diogo Aguiar
  • Collaborators:  Madalena Rebelo de Andrade, Raquel Jorge, João Jesus
  • Project Area: 1 EcoHouse — 52,92 m2 \ 12 EcoHouse2 — 635,04 m2
  • Client: UNICER
  • Constructor: Modular System
  • Photographs: FG + SG
  • Software used: ArchiCAD & Rhino

(more…)

Qube in Amsterdam, Netherlands by NL Architects

Sunday, January 27th, 2013

Article source: NL Architects

Qube is a commission for an office building in Amsterdam. Qube is part of a development called IJpunt by G&S Vastgoed. IJpunt will consist of four blocks designed by Claus en Kaan, Dedato, MVSA and NL A.

The site is truly unique: the most western corner of the Minervahaven, overlooking the Mercuriushaven and the river IJ. Well connected to both the city center as the rest of the world, both by car, public transport and bike.

Image Courtesy NL Architects

  • Architects: NL Architects
  • Project: Qube
  • Location: IJpunt, Minervahaven, Amsterdam, Netherlands
  • Nl Architects: Pieter Bannenberg, Walter Van Dijk, Kamiel Klaasse
  • Team: Arne Van Wees With: Giulia Pastore, Gen Yamamoto, Gert Jan Machiels
  • Qube: Office Building, Ijpunt,Minervahaven, Amsterdam 2012 – 201?
  • Client: G&S Vastgoed
  • Size: Gross Floor Area 6560m², Net Floor Area 5940m², Plot 2430m²
  • Structural Engineers: Van Der Vorm
  • Installations: Wichers & Dreef
  • Software used: Autocad, Rhino 3D, 3dS Max, Adobe Illustrator

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise