Open side-bar Menu
 ArchShowcase

Archive for the ‘Nemetschek’ Category

House with Futokoro in Koganei, Japan by Mizuishi Architects Atelier (designed using Vectorworks)

Saturday, November 12th, 2011

Article source: Mizuishi Architects Atelier

This house was planned in the deepest part of a site divided into three. Because it was expected that next buildings approach in the east and west, I aimed at the house which wind and looking could pass in the north and south direction. Residents are husband and wife, two little girls, two dogs, three cats.They had many personal things, but when I saw the overflow condition of their things,I thought It is good exactly for them just like “they are not worry,even if they do not tidy up” rather than they keep a thing in storage exactly.

Exterior View

  • Architects: Kota Mizuishi/Mizuishi Architects Atelier
  • Project: House with Futokoro
  • Location: Koganei, Tokyo, Japan
  • Type : residential house
  • Structural engineer : Kentaro Nagasaka
  • Lighting designer : Yasuo Tsunoda
  • Contractor : Kraft Home
  • Site area : 157.27m2
  • Building area : 67.52 m2
  • Total floor area: 108.11 m2
  • Structure : wood
  • Story : 2
  • Software used: Vectorworks

(more…)

Tiburon House in San Francisco, California by Andrea Ponsi Architetto (designed using Vectorworks and SketchUp)

Wednesday, November 9th, 2011

Article source: Andrea Ponsi Architetto

The setting

On San Francisco Bay, on the eastern side of Tiburon peninsula, at the end of a short road running steeply downhill amidst the vegetation, a narrow triangular valley slopes gently down to a little beach.

The house is located in the center of this valley and opens directly onto the beach, which in the course of the day widens and contracts with the rising and falling of the tide.

Deck opening onto the beach (Images Courtesy Richard Barnes)

  • Architect: Andrea Ponsi Architetto
  • Project name: Tiburon House
  • Location of site: San Francisco, California
  • Architect of record: Jensen & Associates, San Francisco
  • Production team: Scott Davis, Dean Orr
  • Photographer: Richard Barnes
  • Software used: Vectorworks and SketchUp

(more…)

Vanilli in Linz, Upper Austria by X Architekten (designed using Vectorworks)

Wednesday, November 2nd, 2011

Article source: X Architekten

Task:

The bar “Vanilli“, on the ground floor of a house situated in the old town, has been the most popular venue of Linz’s trendy nightlife for more than two decades. The new owners brought with them the desire for a complete redecoration, aiming to retain the glamorous reputation whilst also maintaining the fundamental building structures of the listed building to meeting planning requirements.

Image Courtesy David Schreyer

  • Architects: X Architekten
  • Project: Vanilli
  • Location: Hofgasse, Linz, Upper Austria
  • Client: Vanilli GmbH
  • Start of planning: April 2008
  • Completion date: Januray 2009
  • Floor space: 163 m2
  • Photography: David Schreyer
  • Software used: Vectorworks 2010

(more…)

GKK Dental Ambulatory in Linz, Oberösterreich by X Architekten (designed using Vectorworks)

Wednesday, November 2nd, 2011

Article source: X Architekten

Task:

The relocation of various businesses from the Voestalpine steel manufacturer’s premises included the dental clinic of the Upper Austrian regional medical insurance company. The nearby “Service Zone” was chosen as the new location. The task was to create a modern and service-oriented clinic on a 525 m2 plot which offers the dentists the best possible hygiene and functionality at work and which receives and guides the patients.

Image Courtesy Max Nirnberger

  • Architects: X Architekten
  • Project: GKK Dental Ambulatory
  • Location: Stahlstraße 2, Linz, Oberösterreich
  • Client: APK Pensionskasse AG
  • Planning data: Direct order 2006
  • Start of Planning: Dezember 2006
  • Handing over: Februar 2008
  • Floor Space: 525 m2
  • Construction: Ceiling Polycarbonatplatten
  • Floor: Raised Floor PVC-Covered
  • Bersten-Corpus: Acrylglass unnotched
  • Photography: Max Nirnberger
  • Software used: Vectorworks 2010

(more…)

Hair Very Salon in Hiroshima, Japan by MAKER (designed with Vectorworks)

Sunday, October 30th, 2011

Article source: MAKER

Salon located in the provincial city of Kure, Hiroshima, Japan. Been expected to become a community space in the area. This salon suppose to be for all ages. Therefore no sense of limitation, the image of the design had to be favorable for all ages.

Cut space we can feel the depth of space

  • Architects: MAKER
  • Project: Hair Very Salon
  • Location: Kure-shi, Hiroshima, Japan
  • Project Type: Shop (hair salon)
  • Site Area: 64.65 sq m
  • Cost of Construction: 3,000,000 JPY
  • Date of completion: June 2009
  • Software used: Vectorworks

(more…)

A Room Over the Sea in Molo Nord, Italy by Studio Zero85 (designed using Vectorworks)

Saturday, October 29th, 2011

Article source: Studio Zero85

Renovation of the “trabocco” above a port canal in Pescara
The trabocco is an old “fishing machine” typical of the Adriatic coast. These construction consist of a platform set on pilots above the sea. Horizontally is fixed by long poles or antennas, carring a large fishing net stem out from the platform.

Image Courtesy Sergio Camplone

  • Architects: Studio Zero85
  • Project: Trabocco: A Room Over the Sea
  • Location: Molo nord, Pescara (PE), ITALY
  • Design team: Mario Michetti, Giovanna Pizzella, Mirko Giardino
  • Project area: area of trabocco 24 mq, area of platform 112 mq
  • Project Year: 2005_2009
  • Photographs: Sergio Camplone
  • Structural enginee: Paolo Cerasoli
  • Furniture: euVivo, pescara
  • Software used: Vectorworks

(more…)

House in Horinouchi, Japan by Mizuishi Architect Atelier (designed using Vectorworks)

Saturday, October 29th, 2011

Article source: Mizuishi Architect Atelier

This is a very small house built on the triangle site where the river and the road were crossed and made to the acute angle.For the dead-end road, it became a plan in various regulations for obtaining special permission. Residents are husband and wife and a little girl. Although it was a novel site of a limited area, since a river was faced through a bank and a promenade, I would like to design various relations with the river. The building is the form that cut an acute angle part on a triangle plan derived from the site.Furthermore,it got the maximum volume of hip roof of three planes in regulation of setback-line.

Exterior view

  • Architects: kota mizuishi / Mizuishi Architect Atelier
  • Project: River side house / House in Horinouchi
  • Location: Suginami, Tokyo, Japan
  • Type: residential house
  • Structural engineer: Kentaro Nagasaka
  • Lighting designer: Tatsuoki Nakajima
  • Contractor: Hirano-Kensetu
  • Site area: 52.14m2
  • Building area: 29.07 m2
  • Total floor area: 55.24 m2
  • Structure : wood
  • Story : 2
  • Software used: Vectorworks

(more…)

Connecticut Pool House in Sharon, Connecticut by Resolution: 4 Architecture (designed with FormZ and Vectorworks)

Friday, October 28th, 2011

Article source: 4 Architecture

Located in a natural clearing within a wooded hillside of northwestern CT, this watering hole serves as a sustainable entertainment and relaxation center from the hectic urban existence, a place to go from always being “on”, to actually shutting “off” for a bit – a place to simply chill out.  The 16 x 52 module contains a sleeping zone at one end of the module, and a food prep  consumption digestion zone at the other.  In between sits a recycled black-steel core, a volume containing the bathroom, steam shower, laundry, storage, and a heat-generating fireplace.  Although ‘floating’ in the middle of the space and not connected to a perimeter wall, the core is filled with natural light from a skylight above and frosted glass pocket doors; an outdoor shower brought indoors.

Image Courtesy RES4

  • Architects: Resolution: 4 Architecture
  • Project: Connecticut Pool House
  • Location: Sharon, Connecticut
  • Completion Date: 2011
  • Size: 832 sf
  • Typology Series: Single Bar
  • Software used: FormZ and Vectorworks

(more…)

Woodland Park Zoo West Entry in Seattle, Washington by Weinstein A|U LLC Architects (designed using Vectorworks)

Thursday, October 27th, 2011

Article source: Weinstein A|U LLC

The new Woodland Park Zoo West Entrance replaces the old north and west entrances providing amenities and services in an arrangement that allows large numbers of guests to enter the zoo quickly, while maintaining a scale intimate enough to be enjoyed by small groups or individuals.  The zoo entrance is meant to be experienced as a node along a larger path around Woodland Park. With a variety of opportunities for seating or gathering, the plaza is a civic space enjoyed by zoo patrons and the public at large.

Image Courtesy Lara Swimmer

  • Architects: Weinstein A|U LLC Architects
  • Project: Woodland Park Zoo West Entry
  • Location:Seattle, Washington
  • Design Team: Rob Kiker, Ed Weinstein, Kirsten Wild
  • Size: Project 97,909 sf; Buildings: 8274 sf
  • Project Year: 2010
  • Software used: Vectorworks 2008 for documentation and 3d modeling

(more…)

Paisano Green Community in El Paso, Texas by Workshop 8 Architecture (designed using Vectorworks and Sketchup Pro)

Tuesday, October 25th, 2011

Article source: Workshop 8

In February of 2010 The Housing Authority of The City of El Paso held a national design competition to help them create the “greenest affordable housing development in the country”. This 73-unit, LEED Platinum, senior housing neighborhood represents a bold new direction in affordable housing and HACEP is leading the way. The project is a mix of one and two bedroom units, nine single room occupancies (SROs), and a central, iconic community building housing office and meeting space — all of which are designed to be wheel-chair adaptable and have 100% visitability.

New Paisano Green Community Renderings

  • Architects: Workshop 8 Architecture
  • Project: Paisano Green Community
  • Location: El Paso, Texas
  • Software used: Vectorworks and Sketchup Pro
  • Roma Campanile
    HOPE VI/Choice Neighborhood Grant Manager
    HUD/Office of Public Housing Investments
  • client contact
    Housing Authority of the City of El Paso
    Gerald Cichon, Chief Executive Officer

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley: Be Inspired Awards
xponential2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy