Open side-bar Menu
 ArchShowcase

Archive for the ‘Vectorworks’ Category

Bridged Living Space in Okayama, Japan by TTArchitects

Tuesday, January 27th, 2015

Article source: TTArchitects

The two dwellings are connected by a “bridged” living space, providing continuity of the outdoor space. Located in a quiet space near a local primary school, the concept for this dwelling started with a dual yard layout, the front for guest parking and an aesthetically prioritised garden at the rear.

Image Courtesy © Kei Sugino

Image Courtesy © Kei Sugino

  • Architects: TTArchitects
  • Project: Bridged Living Space
  • Location: Kurashiki, Okayama,Japan
  • Photography:  Kei Sugino
  • Software used: Vectorworks
  • Team: Teruki Takayoshi, Hisataka Tanio, Kumiko Yamaguchi/  TT Architects
  • Structural consultants: Seiji Kimura, Nathumi Kondou/ Kimura Structural Engineers
  • General constructors: Takayoshi Seko, Terayama Brothers / Block Construction
  • Landscape gardener: Hidemasa Takada/ Souzouen
  • Site area:359.53 sq m
  • Building area: 92.44 sq m
  • Total floor area: 141.82 sq m
  • Structure: wood: 2story
  • Construction period:April,2014

(more…)

Gordon Avenue by Frits de Vries Architect

Saturday, January 24th, 2015

Article source: Frits de Vries Architect

Set on a moderately sloped lot, this single-family house is organized around a feature interior double-height division, bisecting social from functional spaces, private from public rituals.

Image Courtesy © Frits de Vries Architect

Image Courtesy © Frits de Vries Architect

(more…)

H71a by Studio Granda

Wednesday, January 21st, 2015

Article source: Studio Granda

H71a was a shop adjacent to the timber house at  Hverfisgata 71. In 2001 Studio Granda converted the house into a studio, office and archive for photographer Sigurgeir Sigurjónsson. The shop, that had an unsound structure, was left vacant.

Image Courtesy © SigurgeirSigurjónsson

Image Courtesy © SigurgeirSigurjónsson

  • Architects: Studio Granda
  • Project: H71a
  • Photography: SigurgeirSigurjónsson
  • Software used: Vectorworks
  • Structural &environmental Engineers: Viðsjá
  • Electrical Engineers: VJÍ
  • Site: 394m2
  •  Basement: 94m2
  • Ground floor: 84m2
  • 1st floor: 53m2
  • Total: 231m2
  • Awards: Nominated for the European Union Prize for Contemporary Architecture – Mies van der Rohe Award 2015 Shortlisted for the Icelandic Design Award 2014

(more…)

Hair salon “SLUNDRE” in Fukushima, Japan by Cohta Asano / BHIS

Wednesday, January 14th, 2015

Article source: Cohta Asano / BHIS

Hair salon “SLUNDRE” is a renovation project in the 2nd floor part of the store construction in Iwaki city , Fukushima.

“SLUNDRE” means “slow and sure”. It’s named by its owner.

Image Courtesy © Toshiyuki Azuma

Image Courtesy © Toshiyuki Azuma

  • Architects: Cohta Asano / BHIS
  • Project: Hair salon “SLUNDRE”
  • Location: 2F 3-3-9 Kubo Kashima-machi Iwaki city Fukushima Japan
  • Photography: Toshiyuki Azuma
  • Software used: 3DCAD “Sketch up” and 2DCAD “Vectorworks” and making “model”
  • Area: 136.9 sqm
  • Year: 2014
  • Manufacturers: KEYTEC

(more…)

TY in Tokyo, Japan by Yo Yamagata Architects

Tuesday, January 13th, 2015

Article source: Yo Yamagata Architects

The site is located in residental area of south part of Tokyo. We designed this house into simple three steps of planning process. 1. Dig the trench in the ground, and bury bedrooms. 2. Float a maximum volume according to the scenic zone regulation on the trench. 3. Cut off the corner of the volume to be open to the sly. Cut off volume supply sunlight to living space and permeate through the plastic grating to the lower floor.

Image Courtesy © Yo Yamagata Architects

Image Courtesy © Yo Yamagata Architects

  • Architects: Yo Yamagata Architects
  • Project: TY
  • Location: Tokyo, Japan
  • Software used: AutoCad, Vectorworks and SketchUp

(more…)

Cut Paw Paw in Victoria, Australia by ANDREW MAYNARD ARCHITECTS

Tuesday, January 13th, 2015

Article source: ANDREW MAYNARD ARCHITECTS 

What?
Cut Paw Paw is a renovation and extension to a double fronted weatherboard home in Seddon, Victoria, Australia. Name?
Cut Paw Paw is the name of the parish in which the house presides, and a name that the owners liked very much. It’s a weird name, hence we like it too.

Image Courtesy © Peter Bennetts

Image Courtesy © Peter Bennetts

  • Architects: ANDREW MAYNARD ARCHITECTS 
  • Project: Cut Paw Paw
  • Location: Victoria, Australia
  • Photography: Peter Bennetts
  • Software used: Vectorworks and Sketchup
  • Directors: Mark Austin and Andrew Maynard
  • Project Architect: Mark Austin
  • Builder: Marcus Hamilton
  • Completion date: March 2014

(more…)

Fujigaoka T in Kanagawa, Japan by ChikaraOhno / sinato

Friday, January 2nd, 2015

Article source: ChikaraOhno / sinato

This project is a home for a family of three in one unit of a twenty-six year old apartment building.

Although the previous ceiling height was a uniform 2450mm, after checking the structural drawings we realized that the existing height was the minimum required due to the placement of a services pit above, with the slab actually much higher in places, so we proceeded in planning the layout considering this height.

Image Courtesy © Toshiyuki Yano

Image Courtesy © Toshiyuki Yano

  • Architects: ChikaraOhno / sinato
  • Project: Fujigaoka T
  • Location: Fujigaoka, Kanagawa, Japan
  • Photography: Toshiyuki Yano
  • Software used: Vectorworks on Mac
  • Area: 68.2 sqm
  • Client: individual
  • Completion: 03/2014

(more…)

White hut and Tilia japonica in Saitama, Japan by Takahashi Maki+Shiokami Daisuke/Takahashi Maki and Associates

Friday, January 2nd, 2015

Article source: Takahashi Maki+Shiokami Daisuke/Takahashi Maki and Associates

The building was rebuilt in a residential area developed in the 1960s that was used as rice fields, and prior to that a likely Arakawa dis-tributary.

Image Courtesy © Takahashi Maki and Associates

Image Courtesy © Takahashi Maki and Associates

  • Architects: Takahashi Maki+Shiokami Daisuke/Takahashi Maki and Associates
  • Project: White hut and Tilia japonica
  • Location: Saitama, Japan
  • Photography: Shigeta satoshi / Nacasa & partners inc., Takahashi Maki and Associates
  • Software used: Vectorworks
  • Site area: 38.05 sqm
  • Building area: 20.95 sqm
  • Total floor area: 57.95 sqm
  • Year: 2010
  • Structural engineers: Moribe Yasushi/Moribe Yasushi lab(Showa Women’s University)
  • General contractors: Shishido building firm

(more…)

New building Drehmo Wenden in Germany by wurm + wurm architekten

Wednesday, December 17th, 2014

Article source: wurm + wurm architekten

In Wenden, the southernmost town of the german region of Sauerland electro mechanical actuators for water management, the power plant sector and the oil and gas industry are manufactured.

The special cut of the new building of the Drehmo GmbH is owed the topographical situation in this region. The moving landscape caused the terracing of the landscape and produces irregularly shaped lot. The unusual floor plan, generated by this contour, and the hillside situation with a view over the valley determine the character and exceptional styling.

Image Courtesy © Ester Havlova, Walter Fogel

Image Courtesy © Ester Havlova, Walter Fogel

  • Architects: wurm + wurm architekten
  • Project: New building Drehmo Wenden
  • Location: Wenden, Germany
  • Photography: Ester Havlova, Walter Fogel
  • Software used: AutoCad, Vectorworks and Cinema4D
  • Client: Drehmo GmbH Zum Eichstruck 10, 57482 Wenden
  • Support structure planning: GmbH, Bühl
  • Square metres7500 m²
  • Design: 2009
  • Completion: 2013

(more…)

Belfry Tashkent in Uzbekistan by Ippolito Fleitz Group GmbH

Saturday, December 6th, 2014

Article source: Ippolito Fleitz Group GmbH

Ippolito Fleitz Group has designed the interior architecture of the Uzbekistan International Forums Palace, located on Amir Timur Square in the heart of the Uzbek capital Tashkent. The palace was ceremonially opened in September 2009 to celebrate the occasion of Tashkent’s 2200th anniversary. A jewellery shop, housed in one of two historic bell towers providing the design prelude to this representative ensemble on Amir Timur Square, was also designed as part of the project.

Image Courtesy © Zooey Braun

Image Courtesy © Zooey Braun

  • Architects: Ippolito Fleitz Group GmbH
  • Project: Belfry Tashkent
  • Location: TashkentUzbekistan
  • Photography: Zooey Braun
  • Software used: Vectorworks
  • TEAM: Peter Ippolito, Gunter Fleitz, Tilla Goldberg, Steffen Ringler, Alexander Fehre, Christian Kirschenmann
  • Lighting Design: pfarré lighting design, München
  • General Contractor: RIEDL Messe-/Laden- & Objektbau GmbH, Pfaffing

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Canon
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy