Open side-bar Menu

Archive for the ‘Vectorworks’ Category

Chosun Residence in Vancouver by Kevin Vallely Architects

Friday, November 9th, 2012

Article source: Kevin Vallely Architects

Situated on the south facing slopes of Vancouver’s North Shore mountains, the Chosun residence pays homage to the tenets of modern architecture while incorporating distinctly regional elements of exposed wood and timber to create a clean, contemporary West Coast esthetic.

Image Courtesy Peter Powles and Kevin Vallely

  • Architects: Kevin Vallely Architects
  • Project: Chosun Residence
  • Location: Vancouver
  • Photography: Peter Powles and Kevin Vallely
  • Software used: Sketchup and Vectorworks


Cargill Innovation Center in Sao Paulo, Brazil by St Arquitetura E Consultoria

Friday, November 9th, 2012

Article source: St Arquitetura E Consultoria

The Cargill Group develops processes to make innovation common practice in all of its business installations throughout the world. It is this vision that stands behind the Center for Innovation set up in the city of Campinas, São Paulo, Brazil, where the aim is to connect customers to experiences and to possibilities for the creation of innovative solutions.

Image Courtesy St Arquitetura e Consultoria

  • Architects: St Arquitetura E Consultoria
  • Project: Cargill Innovation Center
  • Location: Campinas, São Paulo, Brazil
  • Software used: Vectorworks by Nemetchek 


Rose Bay Apartments in Sydney, Australia by Hill Thalis Architecture + Urban Projects Pty Ltd

Wednesday, November 7th, 2012

Article source: Hill Thalis Architecture

The Rose Bay Apartments project comprises 11 residential units, 2 shops and a basement carpark on a compact urban site.

The plan form of the building is a T form providing all units with cross ventilation. On each typical floor, two units face the street as a continuous street wall in accordance with Woollahra Council’s DCP for Rose Bay (also prepared by Hill Thalis). The upper levels have views towards the harbour and the leafy elevated outlook towards Vaucluse. Roof top terraces are provided to upper level apartments of the building. A third unit to the rear of the property is liberated from the property boundaries and shares no common walls with its neighbours – looking towards the extensive harbour and city views to the northwest.

Image Courtesy Brett Boardman

  • Architects: Hill Thalis Architecture
  • Project: Rose Bay Apartments
  • Location: 7-13 Dover Road, Rose Bay, Sydney, Australia
  • Client: Bestknit Holdings Pty Ltd
  • Engineers: Acor Constultants (Structural, Civil, Hydraulic), TC Group (Mechnical)
  • Builders: Beach Constructions
  • Project Area: 609sqm
  • Project year: 2001-2007
  • Article Author: Philip Thalis
  • Photographs by: Brett Boardman
  • Software used: Vectorworks


My Panda in Tokyo, Japan by Torafu Architects

Tuesday, October 30th, 2012

Article source: Torafu Architects

Located at the basement level of Shibuya’s PARCO Part 1 Building, we have designed the interior and exterior of the store for new fashion label ‘my panda’. From ‘Smiles’, the company which created brands such as ‘PASS THE BATON’ and ‘giraffe’, this label is based on a ‘two-tone’ theme. We wanted to design a store which could become iconic to the fashion label such that it may be easily recognized.

Image Courtesy Takumi Ota

  • Architects: Torafu Architects
  • Project: My Panda
  • Location: Shibuya, Tokyo, Japan
  • Photography: Takumi Ota (Architecture); Akinori Ito (Fashion)
  • Principle use: SHOP
  • Production: Ishimaru
  • Facility design: ENDO (Lighting)
  • Curtain design: Yoko Ando
  • Plants: Jungle Collection
  • Building site: Parco Part 1 B1F, Shibuya, Tokyo
  • Total floor area: 44.3㎡
  • Design period: 2012.06-09
  • Construction period: 2012.09-10
  • Software used: Vectorworks


Hard Werken in Kessel-lo, Belgium by i.s.m.architecten

Saturday, October 27th, 2012

Article source: i.s.m.architecten

In our opinion architecture is not neutral, it takes a clear position. She moves, surprises and is beautiful. In the creation of good architecture, the role of the client is not to be underestimated. They have to choose the right architect for the realization of their dream. A client that has utter confidence in their architect, as was the case, allows us to push the project further than the direct materialization of the design brief. A critical dialogue between client and architect is an ideal breeding ground for a beautiful project.

Image Courtesy Frederik Vercruysse

  • Architects: i.s.m.architecten
  • Project: Hard Werken
  • Location: Kessel-lo, Belgium
  • Photographer: Frederik Vercruysse
  • Design Team: i.s.m.architecten in collaboration with Christian de Haas and Tom Huycke
  • Client: Hard Werken bvba
  • Structure-Engineering: UTIL Struktuurstudies
  • Surface: 320 m2
  • Project: December 2010
  • Software used: Vectorworks


House in Asamayama, Japan by Kidosaki Architects Studio

Tuesday, October 23rd, 2012

Article source: Kidosaki Architects Studio

The owner spent quite a few years for found this site, therefore my main concern was to link the beautiful vast sea of trees spread out to Mt. Asama (Asamayama in Japanese) with internal space.

First of all, we can enjoy a sea of trees from the approach deck to the entrance. When open the large door to the living room, Mt. Asama and the foot of it spread in picture window frame formed by the deep and low-height eaves.

Image Courtesy Junji Kojima

  • Architects: Kidosaki Architects Studio
  • Project: House in Asamayama
  • Location: Nagano, Japan
  • Photography: 45g Photography- Junji Kojima
  • Architects: Kidosaki Architects Studio- Hirotaka Kidosaki,
  • Principal-in-charge; Coco Ashihara
  • Structural Engineer: Takashi Manda Structure Design- Takashi Manda, Mitsuru Kobayashi
  • General contractor: Niitsugumi
  • Structural System: Reinforced concrete, steel-frame partly
  • Site area: 1301.31m2,
  • Built area: 225.51m2,
  • Total floor area: 145.27m2
  • Construction: August 2010 to August 2011
  • Software used: VectorWorks and Adobe Illustrator


Abbots Way in Hampshire, UK by AR Design Studio Ltd

Tuesday, October 16th, 2012

Article source: AR Design Studio Ltd

Abbots Way, the latest creation by AR Design Studio, is a stunning five bedroom house. Bordered by mature trees and a small lake, this spectacular house creates feelings of ultimate relaxation and privacy, whilst its contemporary design juxtaposes superbly with its beautifully rural location, on the south coast of England.

Image Courtesy Martin Gardner

  • Architects: AR Design Studio Ltd
  • Project: Abbots Way
  • Location: Hampshire, UK
  • Architect: Andy Ramus
  • Completion: August 2012
  • Photographer: Martin Gardner
  • Software used: Vectorworks


Mediba Creative Farm in Shibuya, Tokyo by Torafu Architects

Friday, September 21st, 2012


This is an office for a Shibuya based company that is moving onto the IT business, located in the Hikarie Building. It comprises of 2200m2 of large open areas featuring common spaces, such as the front desk, meeting spaces and work spaces for around 400 workers.

Image Courtesy Torafu Architects

  • Architects: Torafu Architects
  • Project: Mediba Creative Farm
  • Location: Shibuya, Tokyo
  • Software used: Vectorworks and Sketchup


Skate Park House in Shibuya, Tokyo by Level Architects

Thursday, September 20th, 2012

Article source: Level Architects

The owners of this house, a young married couple, made a special request in regards to the design of their house, located in a quiet residential neighborhood in Shibuya ward. They wanted both a skateboard park and a piano rehearsal room to reflect their own individual interests.
There was no need for a car park on the site, so to take advantage of space a private entrance courtyard was designed. The sliding glass panels of the first floor open up onto this enclosed area and allows for the workshop and studio to expand outwards. The studio has a skateboard bowl imbedded into the floor with multiple angles for plenty of different interaction.

Image Courtesy Level Architects

  • Architects: Level Architects
  • Project: Skate Park House
  • Location: Shibuya, Tokyo, Japan
  • Software used: Vectorworks


House by the Pond by Stelle Architects

Thursday, September 6th, 2012

Article source: Stelle Architects

The overall design of the house was a direct response to an array of environmental regulations, site constraints, solar orientation and specific programmatic requirements.

Image Courtesy Stelle Architects

  • Architect: Stelle Architects
  • Project: House by the Pond
  • Project Architect: Gina Miller
  • Software used: Vectorworks


GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley: Microstation Trial
TurboCAD pro : Start at $299 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy