Open side-bar Menu
 ArchShowcase

Archive for the ‘Vectorworks’ Category

Ipês House in são paulo ,sp.brazil by studio mk27

Saturday, July 7th, 2012

Article source: studio mk27

Ten years ago, when StudioMK27 tried to do a project using exposed concrete, many builders said that this was practically impossible. Yeah, Right – Brazil that has a vast modern tradition in the use of raw concrete? During a determinate period, in the 90´s, the use of the material declined sharply, restricted to the few architects that used it experimentally e sporadically, without fixing a constructive know-how.

Image Courtesy reinaldo cóser

  • Architects: studio mk27 - marcio kogan + lair reis
  • Project: Ipês House
  • Location: são paulo . sp . brazil
  • Project Start: january . 2009
  • Completion :  june . 2011
  • Site area: 1041 sqm
  • Built area :  1343 sqm
  • Architect : marcio kogan
  • Software used: AutoCAD, Vectorworks and 3D max
    (more…)

Harvest Medical Welfare College in Hyogo, Japan in Shogo Iwata Architect

Thursday, July 5th, 2012

Article source: Shogo Iwata Architect

This medical welfare college is located in front of Himeji station. This building is considered as not just a medical welfare college but also an information center about medical and welfare for neighborhood. Therefore, the entrance lounge is used not only as student’s communication space but also people’s counseling space and the auditorium is also used as rehabilitation and eurhythmics lecture space.

Evening view of the north facade (Image Courtesy Yoshihisa Araki)

  • Architects: Shogo Iwata Architect
  • Project: Harvest Medical Welfare College
  • Location: Hyogo, Japan
  • Site area: 1494.48㎡
  • Total floor area: 3802.50㎡
  • Building area: 794.82㎡
  • Structure: steel structure / 5 Floors
  • Construction: 2007
  • Software used: Vectorworks for drawing, illustrator and Photoshop for other things

(more…)

V4 House in Sao Paulo, Brazil by Studio mk27

Tuesday, July 3rd, 2012

Article source: Studio mk27

With each new project contemporary architecture is forced to optimize spaces and use the maximum of each square meter of the site.  V4 House is a rare anti-example.   Its occupation of the land is very far from the maximum coefficient.  Laws allow for much larger constructions. The solution adopted, however, dialogues with the dimension of the site, formulating an adequate relation between the scale of the construction and the site.

Image Courtesy Nelson Kon

  • Architects: Studio mk27
  • Project: V4 House
  • Location: São paulo . sp . Brazil
  • Project Date: April . 2009
  • Completion:  October . 2011
  • Site area: 653,00 sqm
  • Built area: 1.291,00 sqm
  • Software used: AutoCAD, Vectorworks and 3D max (besides other image editing softwares)

(more…)

Global style in Tokyo, Japan by Process5 Design

Tuesday, July 3rd, 2012

Article source: Process5 Design

The first Tokyo branch of Global Style, a made-to-order suit shop, has opened in Kanda, the textile quarter of eastern Tokyo. Kanda is home to a number of pharmaceutical and trading companies and it was assumed that the main customer target would be businessmen passing the shop. As it is also within walking distance from Akihabara, it was considered that people who normally don’t have much to do with suits would also pass by.

Global style

  • Architects: Process5 Design
  • Project: Global style
  • Location: Kanda, Tokyo, Japan
  • Construction type: Interior Renewal
  • Function: order made suite shop
  • Total area: 60.819㎡
  • Construction phase: 4 Feb. ~28 Feb. 2011
  • Software used: Vectorworks, Illustrator and photoshop

(more…)

Villa Hendrikx in Almere-Haven, The Netherlands by 70F Architecture

Sunday, July 1st, 2012

Article source: 70F Architecture

The commission (September 2007) consisted of a detached house on a plot in residential area Overgooi in Almere, at the foot of the Gooimeer dike. The family wanted, except for transparency and privacy, a strong integration of the plot with the building as opposed to a block on a mound. The house is a two-story building with traditional planning, living on the ground floor and sleeping upstairs. The building is divided into three parts: a two-storey main entrance building facing the front garden, a patio and connecting hallway as an open area in between, and finally the living area in a one-story volume in the middle of the plot.

Image Courtesy Luuk Kramer

  • Architects: 70F Architecture
  • Project: Villa Hendrikx
  • Location: Ludenbos 9, 1358 EL Almere, The Netherlands
  • Client: the Hendrikx family
  • Project architect: Carina Nilsson
  • Project leader: Bas ten Brinke
  • Engineer: van Rossum Almere
  • Contractor: REKO Uelsen (D)
  • Photographer: Luuk Kramer
  • Completed: September 2009
  • Software used: mix of Autocad/3D studio and Vectorworks

(more…)

Young At Art Museum in Davie, Florida by Architecture Is Fun, Inc.

Tuesday, June 26th, 2012

Article source: Architecture Is Fun, Inc.

Shifting the museum paradigm, the Young At Art Museum in Davie, Florida takes a sophisticated design approach to bridging the gap between an adult art museum and a children’s museum. The art museum for children features 22,000 SF of exhibit space designed by Architecture Is Fun, rich in branded environments, art installations and art-making opportunities.

Young At Art Museum

  • Architects: Architecture Is Fun, Inc.
  • Project: Young At Art Museum
  • Location: Davie, Florida
  • Software used: designed and developed in Vectorworks, with graphic support from the Adobe Creative Suite.

(more…)

Petting farm in Den Uyl Park, Netherlands by 70F architecture

Saturday, June 23rd, 2012

Most city parts of Almere, a city with almost 190.000 inhabitants, have a petting farm. In the ‘den Uyl’ park there used to be one, but it burned down in the early 80’s, leaving only its concrete foundation. Early 2005 we were commissioned by the municipality of Almere to design a new petting farm on the exact location and the remaining foundation. The building was finally built using almost only sponsored money, and finished late 2008.

Image Courtesy luuk kramer

  • Architects:  70F architecture
  • Project:  Petting Farm
  • Location:  Den Uyl Park, Almere, Netherlands
  • Project Area:  126 m2
  • Design:  2005 • Completion: 2008
  • Cost:  € 150,000
  • Client:  Municipality of Almere
  • Program: Petting farm
  • Photo : luuk kramer
  • Software used: mix of Autocad/3D studio and Vectorworks
    (more…)

Loft of Frank and Amy in Hell’s Kitchen, New York City by Resolution: 4 Architecture

Saturday, June 23rd, 2012

Article source: Resolution: 4 Architecture

Designed for a writer and a film editor, the Loft of Frank and Amy is a bare, wide-open play space in New York City’s gritty Hell’s Kitchen neighborhood. Located in a former industrial building, the loft occupies an entire floor with full window exposure and dynamic urban views on three sides. The design enhances this industrial context by posing new construction as a single sculptural intervention within this existing space.

kitchen (Image Courtesy Paul Warchol)

  • Architects: Resolution: 4 Architecture
  • Project: Loft of Frank and Amy
  • Location: Hell’s Kitchen, New York
  • Completion Date: 2000
  • Size: 4,800 sf
  • Construction Cost: $275,000
  • Bedrooms: 3
  • Baths: 3
  • Features: Writing Room, Open Loft Living, Dining & Kitchen
  • Software used: FormZ & Vectorworks

(more…)

Lake Iosco House in Bloomingdale, New Jersey by Resolution: 4 Architecture

Saturday, June 23rd, 2012

Article source: Resolution: 4 Architecture

Designed as a second home for a single mom and young son who live in Manhattan only 45 minutes away, this two-story single bar scheme is positioned as close to the lake as zoning allows. The result is a long linear composition oriented north south, with complementing sunrise and sunset decks to the east and west. Lake views are available from all rooms.

Image Courtesy RES4

  • Architects: Resolution: 4 Architecture
  • Project: Lake Iosco House
  • Location: Bloomingdale, New Jersey
  • Completion Date: 2009
  • Size: 2,100 SF
  • Typology: Two-story Single Bar Series
  • Modules: 4 Boxes, Panelized Fireplace/Storage
  • Bedrooms: 3
  • Baths: 2.5
  • Software used: FormZ & Vectorworks

(more…)

Sheepstable in Almere, the Netherlands by 70F Architecture

Friday, June 22nd, 2012

Article source: 70F Architecture

The city of Almere has a sheep population of about 80 sheep. The sheep are mobilized to keep the powerful weed “acanthus” or “bears-breech” that grows in the “vroege vogel” – forest and “kromsloot” – park in Almere under control. To centralize and house this population, a sheep stable was needed. The stable is designed with an a-symmetrical homogeneous cross-section. The part of the building where the sheep reside is relatively low; the high part is situated above the (public) pathway and the hay storage section, making it possible to store a maximum amount of hay. This shape also creates a natural flow for the air inside the building, which is refreshed by two slits at the foot of each long side of the building.

Image Courtesy Luuk Kramer

  • Architects: 70F Architecture
  • Project: Sheepstable
  • Location: Muiderweg 8, 1351 GJ, Almere, the Netherlands
  • Design team: Bas ten Brinke (Project Leader) and Carina Nilsson MScA (Project Architect)
  • Photographer: Luuk Kramer, luuk@luukkramer.nl
  • Commissioner: the City of Almere, the Netherlands, DMO NME, Hans Warrink
  • Contractor: Reimert Bouw- en Infra, Almere, the Netherlands, Ben van Nieuwenhuizen
  • Gross floor area: 400 m2
  • Building costs: €300.000,- ex. VAT.
  • Project start: 2003
  • Project finished: 2007
  • Software used: mix of Autocad/3D studio and Vectorworks

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy