Open side-bar Menu
 ArchShowcase

Archive for the ‘Vectorworks’ Category

Balmain House in Sydney, Australia by Carter Williamson Architects (designed using Vectorworks)

Wednesday, January 11th, 2012

Article source: Carter Williamson Architects

The original 1860’s home sits modestly on its block. Humble and unassuming, its appearance defines its cultural significance; the workers cottage preserves a ‘moment’ in the rich, blue-collar heritage and character of Balmain. Preserving and restoring the integrity of the existing cottage as part of the streetscape and the eclectic, urban fabric of Balmain was always fundamental to the design. Any addition needed to be sympathetic, sensitively yet distinctively bridging the divide between new and old.

Rear facade at night

(more…)

H-House in Shiga, Japan by TOFU architects

Sunday, January 8th, 2012

Article source: TOFU architects

This building which has grand stairs  is composed of duplex house and a cafe. The site is facing the shopping street leading to the Hikone castle from Hikone station in Shiga. The owner wanted a cafe space on the first floor, so the approach was needed to the third floor. Considering the daily uses, the grand stairs were surrounded gradually around the building.

 

Night View (Images Courtesy Yohei Sasakura)

  • Architect: TOFU architects
  • Project Name: H-House
  • Location: Hikone, Shiga, Japan
  • Project Architect: Fumiya Ogawa+Tomonobu Higashino
  • Photographs: Yohei Sasakura
  • Software used: formZ, Vectorworks, Photoshop.

(more…)

HCA Hub in Hereford, UK by Hewitt Studios LLP

Friday, January 6th, 2012

Article source: Hewitt Studios LLP

Hewitt Studios have just completed the HCA Hub building which forms a new front-end facility for the Hereford College of Arts.  The proposal delivers much-needed cafe, exhibition and admin space in a striking new volume. With a strong sustainability agenda, the structure is formed of glu-laminated and mass-timber and the space is naturally ventilated and day-lit. A reflective pool is used to both animate the space and mediate sunlight.

Exterior view (Images Courtesy Paul Younger)

  • Architect: Hewitt Studios LLP
  • Project Title: HCA Hub
  • Location: Hereford, UK
  • Client: Hereford College of Arts
  • Cost: £1.2m
  • All photos: Paul Younger
  • Software used: Microstation and Vectorworks to design/present the project

(more…)

Light Center Speyer in Greater Frankfurt area, Germany by Peter Stasek Architect

Wednesday, January 4th, 2012

Article source: Peter Stasek Architect

The showroom of the new Light Center Speyer, situated in a factory building, was to be designed as exhibition space, consulting area and meeting place. Here, a frame generating interior design synergy effects was to be created for all latest light trends, technologies and light designs. Its sophisticated structure was to build the backbone of the entire light exhibition, but at the same time was never to overshadow the priority of the lighting objects to be exhibited.

Images Courtesy Peter Appelt

  • Architect: Peter Stasek Architect
  • Name of Project: Light Center Speyer
  • Location: Greater Frankfurt area, Germany
  • Client: Light Center Speyer, Speyer, Germany
  • Light planning: Licht-Team, Speyer, Germany
  • Photographer: Lena Rübsam, Germany
  • Software used: Vectorworks Architect 2012 and Photoshop CS 5.1

(more…)

Folsom Street Residential Laboratory in San Francisco, California by Todd Verwers Architects

Tuesday, December 20th, 2011

Article source: Todd Verwers Architects

This urban loft space for a single man occupies the entire top floor of a 1920’s concrete frame structure in San Francisco’s Soma neighborhood.  The space, essentially a “toolbox” for the owner’s urban lifestyle, is unique in its adaptation of commercial and institutional materials and components to residential functions.  Off the shelf laboratory cabinet modules form the kitchen, a customized computer floor forms the sleeping platform, and a precision aluminum framing system creates the enclosure and adaptable framework for an “electronics laboratory”.  In some cases, these modular components were customized to specific client requirements.

Image Courtesy Marion Brenner

  • Architects: Todd Verwers Architects
  • Project: Folsom Street Residential Laboratory
  • Location: San Francisco, California
  • Client: Withheld
  • General Contractor: BIG Construction
  • Photographs: Marion Brenner
  • Software used: Vectorworks

(more…)

Petersen/Verwers Residence in San Francisco, California by Todd Verwers Architects

Sunday, December 18th, 2011

Article source: Todd Verwers Architects

Mid-century modern architecture in California embodied an authenticity unencumbered by historical kitsch and evoked an optimism for the future, while taking advantage of the unique light and climate of the region.  This extensive remodel of a 1962 tract house in San Francisco sought to maintain the mid-century spirit of the house, while adding a new level of refinement and grace.

Exterior View (Images Courtesy Todd Blake Verwers)

  • Architect: Todd Verwers Architects
  • Name of Project: Petersen/Verwers Residence
  • Location: San Francisco, California
  • Client: Todd Blake Verwers&Mette Krebs Petersen
  • General Contractor: Todd Blake Verwers
  • Photographs: Todd Blake Verwers
  • Software used: Vectorworks

(more…)

Sea Ranch Residence in California by Todd Verwers Architects

Saturday, December 17th, 2011

Article source: Todd Verwers Architects

This house, designed for a Danish consul and his wife,was built as a weekend getaway and a venue for informal entertaining.  Sited on a sloping lotwhich opens to spectacular downslope views over the Pacific Ocean, the house gently backs into an existing grove of redwood trees, thus providing intimacy and a “deep woods” feeling toward the rear of the house.  The design embodies a Nordic sensibility to light, material, and lifestyle, while respecting the architectural forms and rustic materiality characteristic of the famed Sea Ranch design tradition.

Exterior View (Images Courtesy Marion Brenner)

  • Architect: Todd Verwers Architects
  • Name of Project: Sea Ranch Residence
  • Location: Pacific Ocean in California, USA
  • Client: Withheld
  • General Contractor: Scott Construction
  • Photographs: Marion Brenner
  • Software used: Vectorworks

(more…)

Private House in Suffolk, UK by Ström Architects

Wednesday, December 14th, 2011

Article source: Ström Architects

The site is located in Suffolk two miles inland from Aldeburgh, and lies within the Suffolk Coast and Heaths Area of Outstanding Natural Beauty. The site itself forms part of an overall land ownership of 2.5ha surrounded by agricultural land.

Front View

  • Architect: Ström Architects
  • Name of Project: Private House
  • Location: Suffolk, UK
  • CGI Visulisation: Peter Guthrie Visualisation
  • Structural Engineer: Barton Engineers
  • Client: Private
  • Programme: Currently in Planning
  • Construction: May 2012 – March 2013
  • Materials: Corten cladding, dark-grey stained timber boarding
  • Software used: Vectorworks, Photoshop, SketchUp, 3DS Max with various modeling plug-ins.

(more…)

Factory Business Center in Braga, Portugal by Simpli Design

Tuesday, December 6th, 2011

Article source: Simpli Design

Factory Business Center (http://www.factoryworkstyle.com) is a business center located on the out-skirts of Braga (north of Portugal), with a bright ‘POP-ART’ decorative style within an industrial pavilion which rents ‘turn-key’ office spaces.

Reception & Entrance

  • Architects: Simpli Design (Designer Jeremy Hugh Aston & Architect João Carlos Ferreira)
  • Project: Fy – Factory Business Center
  • Location: Braga, Portugal
  • Engineering & Building: BEC – Braga Construction Equipment, Inc.
  • Project Area: 700 sqm
  • Type of Building: Office / Business center
  • Project date: 2010
  • Photography: Rui Pires
  • Office Furniture: Iduna, S.A.
  • Software used: The concept, design and interiors are designed with Google SketchUp Pro; The technical development and Plans with Vectorworks; The 3D visuals and renders with Cinema 4D.

(more…)

Sojou Fooding Concept in Casablanca, Marocco by dumdum design

Tuesday, November 29th, 2011

Article source: dumdum design

The mission of dumdum design was to create a global concept for the new healthy restaurant brand SOJOU. The first restaurant opened in September 2011 in Casablanca – Morocco. From the interior design to the graphism, dumdum design has imagine a concept in perspective of other openings.

Interior View (Images Courtesy Jean Madeyski)

  • Architect: dumdum design
  • Name of Project: Sojou Fooding Concept
  • Location: Quartier Gauthier, Casablanca, Marocco
  • Date: September 2011 – First SOJOU is opening
  • Size: +/- 60m2 (for the restaurant space)
  • Seats: 29 seats inside + 10 seats outside
  • Environment: Urban, district of offices
  • Photo credits: Jean Madeyski
  • Software used: Drawings were made on Vectorworks, and the visual of menu on 3d SketchUp

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy