Open side-bar Menu
 ArchShowcase

Archive for the ‘S/W’ Category

Seyfioglu Apartment Building in Istanbul,Turkey by Manco Architects

Thursday, April 9th, 2015

Article source: Manco Architects

4 one bedroom and 16 two bedroom apartments were planned in the project designed for the development of Seyfioglu Apartment Building, which is planned to be reconstructed according to the Urban Regeneration Law.

Image Courtesy © Manco Architects

Image Courtesy © Manco Architects

  • Architects: Manco Architects 
  • Project: Seyfioglu Apartment Building
  • Location: Istanbul,Turkey
  • Software used: AutoCAD, SketchUp, V-Ray and Photoshop
  • Design: Ali Manço, Zuhtu Usta
  • Design Team: Zuhtu Usta, Zeynep Ceren Erdinç
  • Works: Architectural Design
  • Client: Ciner Construction
  • Project Type: Residential
  • Project Status: Ongoing
  • Area: 4.182,6m²

(more…)

Vertical itaim building in são paulo, brazil by Studio MK27 | Marcio Kogan

Thursday, April 9th, 2015

Article source: Studio MK27 | Marcio Kogan

V_Itaim is a small building with 10 apartments in São Paulo designed by studio mk27. Its simplicity and the search for generous spaces in a careful composition of material oriented the architectural project.

The façade of the building is done in exposed reinforced concrete and wooden panels, conceived to shade the inner environments and which the residents can move according to their desires. In this way, the users can optimize their comfort depending on their use and the incidence of the sun.

Image Courtesy © Pedro vannucchi

Image Courtesy © Pedro vannucchi

  • Architects: Studio MK27 | Marcio Kogan
  • Project: Vertical itaim building
  • Location: São paulo, brazil
  • Photography: Pedro vannucchi
  • Software used: AutoCAD
  • Project Date: february . 2011
  • Completion: september . 2014
  • Site area: 620 sqm
  • Built area: 3.045 sqm
  • Apartment type: 144 sqm (living area)

(more…)

OVO in Fideris, Switzerland by Camilo Rebelo

Thursday, April 9th, 2015

Article source: Camilo Rebelo

EGG project was an order from a client full of restlessness – OJ.
OJ acquired a sculpture, called ‘Seed’, of the contemporary Portuguese artist Rui Chafes. The piece built in iron finds its purpose in the universality of OJ’s mind that seeks values such as origin, purity and universal mystery.

In a second stage, OJ threw us the challenge to design and build a space to receive and expose the ‘Seed’, promoting a deep reflection between Art and Architecture. The designed space is in the basement of his home in Fideris, located in the Swiss Alps.

Image Courtesy © Patricio Guedes

Image Courtesy © Patricio Guedes

  • Architects: Camilo Rebelo
  • Project: OVO
  • Location: Fideris, Switzerland
  • Photography: Patricio Guedes
  • Software used: AutoCAD, Solidworks
  • Client: O. J.
  • Collaborators: Patricio Guedes
  • Project partner – sculptor: Rui Chafes
  • Engineering coordination: GOP – Gabinete de Organização e Projectos Lda. (more…)

E&M House in Misiones, Argentina by Módulo 3 arquitectura

Wednesday, April 8th, 2015

Article source: Módulo 3 arquitectura

E&M house is located in a private neighborhood in Posadas city, Misiones, Argentina.

The surface of the house measures 150m2 covered, with living room with kitchen downstairs and 2 bedroom, 1 suite, 1 wc and laundry with tender upstairs.

Also had expansive deck surfaces, barbecue grill and gallery ascending to 220m2 all together

It’s made of masonry and concrete together with large windows. The cover is of galvanized sheet.

Image Courtesy © Módulo 3 arquitectura

Image Courtesy © Módulo 3 arquitectura

  • Architects: Módulo 3 arquitectura
  • Project: E&M House
  • Location: Posadas, Misiones, Argentina
  •  Software used: Lumion, Artlantis.
  • Area: 220 m2
  • Year of project: 2014
  • Year of Construction: 2015 (execution)

(more…)

Gradinita Restaurant in Bucharest, Romania by IN SITU.Ion Popusoi

Wednesday, April 8th, 2015

Article source: IN SITU.Ion Popusoi

The restaurant, conceived as a house in the woods, seeks to blend itself in the landscape. In order to leave the natural environment unchanged the existing trees were included into the façade structure of the building.

The architecture consists of two layers, the lower – transparent and the upper – opaque and ornamental.

Image Courtesy © Ion Popusoi

Image Courtesy © Ion Popusoi

  • Architects: IN SITU.Ion Popusoi, Bogdan Preda
  • Project: Gradinita Restaurant
  • Location: Bucharest, Romania
  • Photography: Ion Popusoi
  • Software used: Autocad and 3d studio max
  • Interior designers: Anne-Marie Jipa, Smilia Pavlovici
  • Client: Isoletta Restaurant
  • Site Area: 720 sqm
  • Project Area: 250 sqm
  • Project Year: 2014

(more…)

DIFFICULT RUN RESIDENCE in Mclean, Virginia by Robert M. Gurney, FAIA, Architect

Tuesday, April 7th, 2015

Article source: Robert M. Gurney, FAIA, Architect

Located in Mclean, Virginia, this project is sited on a seven acre, steeply sloping, wooded lot bordering a stream and parkland trail, known as Difficult Run. The scope of work involved a complete renovation of an existing house, a substantial addition to the house, a new detached garage and guest house, and a comprehensive reorganization of the site.

Image Courtesy © Maxwell MacKenzie Architectural Photographer

Image Courtesy © Maxwell MacKenzie Architectural Photographer

  • Architects: Robert M. Gurney, FAIA, Architect
  • Project: DIFFICULT RUN RESIDENCE
  • Location: Mclean, Virginia
  • Photography: Maxwell MacKenzie Architectural Photographer
  • Software used: AutoCAD, SketchUp
  • Project Architect: John Riordan, LEED AP
  • Contractor(s):
  • PHASE 1: Ted Peterson Peterson & Collins
  • PHASE 2: Steve McCaughan Commonwealth Building & Design
  • Landscape Designer: Lila Fendrick Landscape Architecture and Garden Design
  • Engineer: D. Anthony Beale LLC

(more…)

Dining Room by Selim Senin

Tuesday, April 7th, 2015

Article source: Selim Senin

Several modules for the ceiling design was determined.Modules were combined to form a dynamic surface.Some modules have been selected as the lighting elements.An impressive impact in a small space was made to create.

Image Courtesy © Selim Senin

Image Courtesy © Selim Senin

  • Architects: Selim Senin
  • Project: Dining Room
  • Software used: 3ds max, mental ray, autocad

(more…)

Val-Jalbert Belvedere in Québec, Canada by Atelier Pierre Thibault

Sunday, April 5th, 2015

Article source: Atelier Pierre Thibault

The revitalization of the historic village of Val-Jalbert aims to enhance the architectural integration between yesterday and today. Invaded by an impressive natural strength, the fall of the Ouiatchouan river reveals a striking story in the heart of the experiential trail of Val-Jalbert.

Image Courtesy © Atelier Pierre Thibault

Image Courtesy © Atelier Pierre Thibault

  • Architects: Atelier Pierre Thibault
  • Project: Val-Jalbert Belvedere
  • Location: Historical village of Val-Jalbert, Québec, Canada
  • Software used: AutoCad
  • Design Team: Pierre Thibault, Jérôme Lapierre, Mathieu Leclerc
  • Year: 2014

(more…)

TOP! Store in Salacgriva, Latvia by ARHIS ARHITEKTI

Saturday, April 4th, 2015

Article source: ARHIS ARHITEKTI

The building is created for two scales of perception – towards the VIA Baltica highway it is designed as a linear volume to be perceived in movement, its form and material – wooden planks reminds Salacgrivas historical ship crafting tradition. On the other side, facing Riga Street and a pedestrian walkway, a smaller scale facade is designed which plastic-ally flows into the public space and is close to pedestrian’s scale of perception. New interior conception and colour principles were created to improve the style of the grocery store chain.

Image Courtesy © Indrikis Sturmanis

Image Courtesy © Indrikis Sturmanis

  • Architects: ARHIS ARHITEKTI
  • Project: TOP! Store
  • Location: Salacgriva, Latvia
  • Photography: Indrikis Sturmanis
  • Software used: AutoCAD
  • Design team: Andris Kronbergs, Madara Gibze, Paulis Gibze, Evija Runce, Vilnis Uzors, Kristaps Sulcs, Uldis Jaunsubrens, Helvijs Savickis
  • Shop interior navigation sign design: „Dripe dizains” LTD, dripe.lv
  • Construction design: „DWG” LTD, dwg.lv
  • Construction company: LTD \”R.K.C.F. Renesanse\”
  • Building area: 1555 m2
  • Site area: 6989 m2

(more…)

Nike Union Square Flagship Installation in San Francisco, California by FreelandBuck

Thursday, April 2nd, 2015

Article source: FreelandBuck

As part of Nike’s overhaul of their flagship store on Union Square, our two-story lobby installation is a dynamic array of over 600 reclaimed bleachers which cantilever out over the escalator leading into the store. The well-worn bleacher board, a material Nike has used in numerous stores to convey familiarity and use, is organized here as a set of vectors that flow through the lobby. Ideally, the anomalies of the material are enough to disrupt the smoothness of the geometry, while the unstable, precarious array disrupts a purely nostalgia reading of the bleachers yielding a wider range of associations.

Image Courtesy © FreelandBuck

Image Courtesy © FreelandBuck

  • Architects: FreelandBuck
  • Project: Nike Union Square Flagship Installation
  • Location: San Francisco, California, US
  • Software used: Rhino and Grasshopper

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley:YII2017 Register Now
xponential2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy