Open side-bar Menu
 ArchShowcase

Archive for the ‘S/W’ Category

NINO Restaurant in Arabella mall, KUWAIT by Arch Js

Wednesday, May 6th, 2015

Article source: Arch Js

Introducing itself to the local market in the early 90’s, Nino has developed a reputation for its sleek and funky interiors. Arch JS was provided the task of re branding and redesigning Nino’s future branches to meet the contemporary market today.

Image Courtesy © Nelson Garrido

Image Courtesy © Nelson Garrido

  • Architects: Arch Js
  • Project: NINO Restaurant
  • Location: Arabella food court, Al Bidaa area, KUWAIT
  • Photography: Nelson Garrido
  • Software used: AutoCAD & 3ds Max
  • Construction year: 2014
  • Built area: 480m2
  • Collaborators: Contractors – International Interiors contracting co.

(more…)

Casa Xixim in Tulum, Mexico by Specht Harpman

Wednesday, May 6th, 2015

Article source: Specht Harpman

This residence, on a narrow lot fronting a protected bay in Tulum, Mexico, was designed to be fully self-sufficient, and to immerse the occupants in the range of environments that the site offers.

Image Courtesy © Specht Harpman

Image Courtesy © Specht Harpman

  • Architects: Specht Harpman
  • Project: Casa Xixim
  • Location: Tulum, Mexico
  • Software used: Sketchup

(more…)

CALGARY WORKING CLOUD in Canada by Selim Senin

Sunday, May 3rd, 2015

Article source: Selim Senin

The Calgary CMA is home to the second most corporate head offices in Canada among the country’s 800 largest corporations.Many employees are outside feels the need to use the computer.In a quiet environment outside the company must work (sending mail, prepare presentations, video conference etc).In case you can not reach the company immediately tries to deal with this in the corner cafe.Short-term is difficult to find a quiet environment.Come to work in this situation you can take care of business in the WORKING CLOUD single mini office.

Image Courtesy © Selim Senin

Image Courtesy © Selim Senin

  • Architects: Selim Senin
  • Project: CALGARY WORKING CLOUD
  • Location: Canada
  • Software used: Autocad, Sketchup, Vray, Photoshop

(more…)

Nahahum in Near Cashmere, Washington by Balance Associates, Architects

Sunday, May 3rd, 2015

Article source: Balance Associates, Architects

Located north of Cashmere, Washington, in the Nahahum Canyon, this 1650 square foot two story dwelling is set into the hillside with concrete retaining walls that guide the form of the cabin. Its east west longitudinal axis and generous overhangs are designed to take advantage of solar orientation while maintaining panoramic views. The main entry is a two story room with full height glazing on the north and south walls that frame the most dramatic down-canyon view. An eastern oriented living space and kitchen occupy most of the main floor along with a powder room and utility area located within the hillside portion of the home. The upper floor contains the master suite and guest bedroom/bathroom with a loft style flex space that opens up to the living room below.

Image Courtesy © Steve Keating Photography

Image Courtesy © Steve Keating Photography

  • Architects: Balance Associates, Architects
  • Project: Nahahum
  • Location: Near Cashmere, Washington, USA
  • Photography: Steve Keating Photography
  • Software used: Sketchup, Autodesk
  • Principal: Tom Lenchek AIA
  • Project Architect: Kyle Zerbey AIA
  • Structural Engineers: Harriott Valentine Engineers
  • House Area: 1650 sq. ft. (950 main floor + 700 upper floor)
  • Site Area: 20 acres
  • Budget: Withheld at request of home owners
  • Project Year: 2009

(more…)

FABER HEADQUARTERS in Udine, Italy by GEZA Gri e Zucchi Architetti Associati

Sunday, May 3rd, 2015

Article source: GEZA Gri e Zucchi Architetti Associati

Two Landscapes

Faber Industrie Spa are world leading manufacturers of steel cylinders. Their new headquarters are located at a boundary between an industrial area and farmland, and hence belong to both the industrial and the natural landscape. The aim of the project is to interface both landscapes and acknowledge their different qualities and values.

Image Courtesy © Massimo Crivellari

Image Courtesy © Massimo Crivellari

  • Architects: GEZA Gri e Zucchi Architetti Associati
  • Project: FABER HEADQUARTERS
  • Location: via dell’Industria, Cividale del Friuli, Udine, Italy
  • Photography: Massimo Crivellari
  • Software used: Vectorworks
  • Project: Stefano Gri, Piero Zucchi
  • Team: Stefania Anzil, Chiara Marchetti, Tania Teixeira, Francesco Casella, Tina Carletti
  • Structural Engineer: Nuttassociati, Udine, Italy
  • Facade Engineer: Ing. Angelo Peruzza (more…)

CA Crédito Agrícola in Viana do Castelo, Portugal by Marques Franco Arquitectos

Sunday, May 3rd, 2015

Article source: Marques Franco Arquitectos

Designing a bank is always a delicate affair. On the one hand it is important to highlight the transparency and accessibility necessary to an institution that holds our money. On the other hand, it is always necessary to ensure a sense of security and robustness. The exterior of the building looks for that, the ground floor is transparent, easy to see through and access, the upper floors have less fenestrations and more solid construction.

Image Courtesy © José Campos Architectural Photography

Image Courtesy © José Campos Architectural Photography

  • Architects: Marques Franco Arquitectos
  • Project: CA Crédito Agrícola
  • Location: Viana do Castelo, Portugal
  • Photography: José Campos Architectural Photography
  • Software used: Archicad 18
  • Project Year: 2014
  • Area: 4000 sqm
  • General Contractor: Carlos José Fernandes
  • Client: CA Crédito Agrícola

(more…)

M30HOUSE in Cartago, Costa Rica by ARCHITECT SILVIA GONZALEZ

Friday, May 1st, 2015

Article source: ARCHITECT SILVIA GONZALEZ

M30 House is located in Cartago, Costa Rica, it was conceived in 2012 as a low cost housing solution for a young couple in order to have a profitable and accessible house with a great design.

Image Courtesy © ARCHITECT SILVIA GONZALEZ

Image Courtesy © ARCHITECT SILVIA GONZALEZ

  • Architects: ARCHITECT SILVIA GONZALEZ
  • Project: M30HOUSE
  • Location: Cartago, Costa Rica, USA
  • Software used: Autodesk, Revit.

(more…)

Olhöps Craft Beer House in Valencia, Spain by Borja Garcia Studio

Friday, May 1st, 2015

Article source: Borja Garcia Studio

This project rises with the hopes of creating a new kind of store to have craft beer. A place to enjoy a beer, alone or in good company, in an environment with unique characteristics in the industry.

Image Courtesy © Borja Garcia Studio

Image Courtesy © Borja Garcia Studio

  • Architects: Borja Garcia Studio
  • Project: Olhöps Craft Beer House
  • Location: Valencia, Spain
  • Software used: Rhinoceros

(more…)

Contemporary Bungalow in Haelen, Netherlands by Lab32 architecten

Friday, May 1st, 2015

Article source: Lab32 architecten

This villa in the Dutch village of Haelen was built for a couple with a child. It resides on the grounds of an out-dated ninety sixties bungalow. The villa anticipates the family’s love for outdoor living. The box shaped part of the villa seems to float above the sloping landscape. On both sides, it is fitted with windows that offer a panoramic view. The windows optimise the relationship between the in- and outdoor environment. They make both worlds transparent. The low-lying terrace is situated at the rear side of the villa and holds a swimming pool and koi pond. The terrace runs into the covered terrace. Both terraces strengthen the relationship between the in- and outdoor living space. The interior was designed in harmony with the villa. It perfectly fits the minimalist aesthetics the clients aspire. The austere and pure design was combined with warm materials. We designed everything and left nothing to chance. Because of this, we can truly say that the villa is like a tailor-made suit that offers optimal comfortable living.

Image Courtesy © Lab32 architecten

Image Courtesy © Lab32 architecten

  • Architects: Lab32 architecten
  • Project: Contemporary Bungalow
  • Location: Haelen, Netherlands
  • Software used: Autocad,  Autodesk

(more…)

Sauna Saltsjöbaden in Sweden by Murman arkitekter ab

Thursday, April 30th, 2015

Article source: Murman arkitekter ab

This is a Sauna and relax building in Saltsjöbaden just outside Stockholm.
Saltsjöbaden community was founded in the 1890’s with the goal of creating a society close to nature following the example of central European spas, but near the nature and the sea with the possibility of boat and outdoor activities.

The villas built there was relatively large to fit the growing group of people with a good economy around the turn of the century.

Image Courtesy © Åke E-son Lindman

Image Courtesy © Åke E-son Lindman

  • Architects: Murman arkitekter ab, Hans Murman och Ulla Alberts, Frida Gustafsson
  • Project: Sauna Saltsjöbaden
  • Location: Saltsjöbaden, Sweden
  • Photography: Åke E-son Lindman, Hans Murman
  • Software used: AutoCAD
  • Building complete: 2011

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Canon: CW910
Bentley:YII2017 Register Now
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy