Open side-bar Menu
 ArchShowcase

Archive for the ‘S/W’ Category

Two family house Gaicomuzzi in Kaltern, Italy by Monovolume architecture + design (designed using ArchiCAD)

Friday, June 22nd, 2012

Article source: Monovolume architecture + design

Giacomuzzi house is a duplex building. It is conceived as a highly compact body to fulfill energy issues and it fits into the sloping terrain to exploit the landscape. The house is oriented towards the path of the sun and overlooks a stunning sight. The site is located on the outskirts of the village Caldaro sulla strada del vino, where between the house and the lake Caldaro there are just fields and vineyards. To show up this wonderful view, a continuous wall closes three sides of the building, whereas the south facade features wide windows and balconies.

Image Courtesy René Riller

  • Architects: Monovolume architecture + design (Arch. Patrik Pedó_Arch. Juri Pobitzer)
  • Project: Two family house Gaicomuzzi
  • Location: 39052 Kaltern (BZ), Italy
  • Architectural staff: Arch. Simon Constantini, Arch. Sergio Aguado Hernàndez
  • Structural engineers: Andreas Amort
  • Photographer: René Riller
  • Client: Giacomuzzi
  • Program: living
  • Realisation: 2010/11
  • Building area: 600 m²
  • Software used: ArchiCAD

(more…)

Sheepstable in Almere, the Netherlands by 70F Architecture

Friday, June 22nd, 2012

Article source: 70F Architecture

The city of Almere has a sheep population of about 80 sheep. The sheep are mobilized to keep the powerful weed “acanthus” or “bears-breech” that grows in the “vroege vogel” – forest and “kromsloot” – park in Almere under control. To centralize and house this population, a sheep stable was needed. The stable is designed with an a-symmetrical homogeneous cross-section. The part of the building where the sheep reside is relatively low; the high part is situated above the (public) pathway and the hay storage section, making it possible to store a maximum amount of hay. This shape also creates a natural flow for the air inside the building, which is refreshed by two slits at the foot of each long side of the building.

Image Courtesy Luuk Kramer

  • Architects: 70F Architecture
  • Project: Sheepstable
  • Location: Muiderweg 8, 1351 GJ, Almere, the Netherlands
  • Design team: Bas ten Brinke (Project Leader) and Carina Nilsson MScA (Project Architect)
  • Photographer: Luuk Kramer, luuk@luukkramer.nl
  • Commissioner: the City of Almere, the Netherlands, DMO NME, Hans Warrink
  • Contractor: Reimert Bouw- en Infra, Almere, the Netherlands, Ben van Nieuwenhuizen
  • Gross floor area: 400 m2
  • Building costs: €300.000,- ex. VAT.
  • Project start: 2003
  • Project finished: 2007
  • Software used: mix of Autocad/3D studio and Vectorworks

(more…)

CASABATE 128 in Bologna, Italy by Rizoma Architecture

Friday, June 22nd, 2012

Article source: Rizoma Architetture

CasAbate is a “bridge house” and is located in one of the more fascinating street of Bologna. It has the typical characteristics of the old house of the city center; there’s a very long corridor, about 20 meters, and a little courtyard. The new project has the aim of improving the space of the corridor, the light comfort and the energy efficiency of the building.

CASABATE 128

(more…)

Villa Frenay in Lelystad, The Netherlands by 70F Architecture

Friday, June 22nd, 2012

Article source: 70F Architecture

The commission (March 2008) consisted of a detached house with outbuildings on a plot in villa park ‘de Noordzoom’ in Lelystad, at the foot of the Enkhuizen – Lelystad dike. The family wanted, like many others, light, air and space.

The house is a one-story bungalow, while the site asked for a response to “living at the water.” The latter is accomplished by making a veranda along the entire length of the building (south), at the most important rooms of the house; from bedroom, to wardrobe, to the master bathroom, to hobby room to the kitchen and finally to the dining- and around the corner the living room. Along this line, there is a transition from water to veranda, to completely glass facade, with doors behind which all mentioned areas are.

Image Courtesy Luuk Kramer

  • Architects: 70F Architecture
  • Project: Villa Frenay
  • Location: Lommerrijk 18, 8241 AZ Lelystad, The Netherlands
  • Project Architect: Carina Nilsson
  • Project Leader: Bas ten Brinke
  • Engineer: van Rossum Almere
  • Contractor: Ubink Almere
  • Photographer: Luuk Kramer
  • Completed: May 2010
  • Software used: mix of Autocad/3D studio and Vectorworks

(more…)

City Tower in Cheongna, Korea by Gianluca Milesi Architecture

Thursday, June 21st, 2012

Article source: Gianluca Milesi Architecture

In the City Tower competition in Cheongna, Korea, was asked to design an high rise building in a city of future development. Our principal idea for this project has been to concentrate and organize an urban complex node in an unique building and a center of attraction. Our intention has been to formalize this main concept through a consistent architectural structure with a form that respects its consistency in every part, still taking different shapes in order to host the different functions of the project program.

City Tower in Cheongna

  • Architects: Gianluca Milesi Architecture
  • Project: City Tower
  • Location: Cheongna, Korea
  • International Competition Not Due, 2009-2010
  • Software used: The projects are redacted using mostly 3dstudio max with the eventual contribution of autocad, with different renderings engines, in particular we have used mental ray.

(more…)

ANTONY in Paris, France by ARCHI5

Thursday, June 21st, 2012

Article source: ARCHI5

The project’s design and planning focus on a thorough understanding of the local context. The building responds to existing scales. Its location and architecture dentote the space´s public nature and inject new life into the site. By taking surrounding public spaces into consideration when designing the project ,we reinforced the notion that this building is a public facility, a landmark within the surrounding disorder.

Image Courtesy Thomas Jorion

  • Architects: ARCHI5
  • Project: ANTONY
  • Location: Paris, France
  • Photography: Thomas Jorion
  • Software used: Autocad for all the plans. For 3D, Rhino and 3DS and Photoshop for all the renderings.

(more…)

Ecletica Music Center in Nova Prata, Brazil by 0E1 Arquitetos

Thursday, June 21st, 2012

Article source: 0E1 Arquitetos

The design for this music school is based upon the creation of two hermetic chambers to house rehearsals inside a large space in a historic building located in Nova Prata, Brasil. The configuration of such boxes turns the residual space into two ambients that, even though are continuous, configure different spaces for different activities.

Image Courtesy Marcelo Donadussi

  • Architects: 0E1 Arquitetos
  • Project: Ecletica Music Center
  • Location: Nova Prata, Brazil
  • Project Design Team: Ana Cristina Castagna, Anna Carolina Manfroi, Gabriel Giambastiani, Mário Guidoux, Pablo Resende
  • Client: EclŽtica Centro de Música
  • Constructor: 0e1 Arquitetos and Local craftsmen
  • Use: Comercial
  • Area: 62m²
  • Photos: Marcelo Donadussi
  • Design Period: 2012
  • Software used: AutoCAD and Rhinoceros

(more…)

90 Degrees Architecture, City Walls Parasites in Milan, Italy by Gianluca Milesi Architecture

Wednesday, June 20th, 2012

Article source: Gianluca Milesi Architecture

90 Degrees architecture is a research on the urban environment of the city of Milan.

The idea informing this projects is to work on parts of the city uncompleted and never solved, without any urban or architectural quality. Our specific interest is to act on the never finished and never designed blind facades of buildings results of a failed development of the urban fabric and of a lack of design.

Our interest is focused on these “Walls” that, in the best of the circumstances, are spaced dedicated to commercial posters or low quality decorations and just in very few cases solved, usually through the use of green climbing natural patterns.

90 Degrees Architecture

  • Architects: Gianluca Milesi Architecture
  • Project: 90 Degrees Architecture, City Walls Parasites
  • Location: Milan, Italy
  • Software used: The projects are redacted using mostly 3dstudio max with the eventual contribution of autocad, with different renderings engines, in particular we have used mental ray.

(more…)

Fulldome Experience Center in Bangkok, Thailand by FORMA Architect

Wednesday, June 20th, 2012

Article source: FORMA Architect

Multifunctional fulldome hall having 300 seats is a core of the Fulldome Experience Center. Visitors will be amused by a dynamic interactive space carrying a scientific and educational functions. It includes installations, exhibitions and game zones as well as cafeteria, gift shop and conference room for the visitors’ comfort and versatility of the building.

Fulldome Experience Center

  • Architects: FORMA Architect
  • Project: Fulldome Experience Center
  • Location: Bangkok, Thailand
  • Team: Oleksiy Petrov, Iryna Miroshnykova, Alice Magirovska, Dmytro Prutkin, Vadim Sidash, Victoria Leonchenko, Anna Dobrova
  • Location: Bangkok, Thailand.
  • Client: Fulldome.Pro
  • 
Area: Building area 3500 m2
  • 
Technical solutions: Front Pictures
  • Type: Concept design
  • Status: Ongoing
  • Year: 2011-2012
  • Software used: Rhino and Autocad

(more…)

The Self-Assembly Line by Skylar Tibbits

Wednesday, June 20th, 2012

Article source: Skylar Tibbits

The Self-Assembly Line is a large-scale version of a self-assembly virus capsid, demonstrated as an interactive and performative structure. A discrete set of modules are activated by stochastic rotation from a larger container/structure that forces the interaction between units. The unit geometry and attraction mechanisms (magnetics) ensure the units will come into contact with one another and auto-align into locally-correct configurations. Overtime as more units come into contact, break away, and reconnect, larger, furniture scale elements, emerge. Given different sets of unit geometries and attraction polarities various structures could be achieved. By changing the external conditions, the geometry of the unit, the attraction of the units and the number of units supplied, the desired global configuration can be programmed.

Image Courtesy Skylar Tibbits

  • Architects: Skylar Tibbits
  • Project: The Self-Assembly Line
  • Video: http://vimeo.com/38067834
  • Project Team:  Martin Seymour, Andrew Manto, Erioseto Hendranata, Justin Gallagher, Laura Salazar, Veronica Emig, Aaron Olson
  • Sponsors and funding sources : TED Conferences & SEED Media Group
  • Software used: Rhino + Python

Image Courtesy Skylar Tibbits

A collaboration between Skylar Tibbits and Arthur Olson, The Molecular Graphics Laboratory, The Scripps Institute, CA.

Presented at the 2012 TED Conference in Long Beach, CA.

Image Courtesy Skylar Tibbits

Image Courtesy Skylar Tibbits

Image Courtesy Skylar Tibbits

Image Courtesy Skylar Tibbits

Image Courtesy Skylar Tibbits

Image Courtesy Skylar Tibbits

Image Courtesy Skylar Tibbits

Image Courtesy Skylar Tibbits

Image Courtesy Skylar Tibbits

Image Courtesy Skylar Tibbits

Image Courtesy Skylar Tibbits

Graphisoft ARCHICAD  Download a 30-Day FREE trial
Bentley: Be Inspired Awards
xponential2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy