Open side-bar Menu
 ArchShowcase

Archive for the ‘S/W’ Category

Ammo Hotel in Sanya, China by LATITUDE

Wednesday, January 14th, 2015

Article source: LATITUDE

Just as every home represents the unique lifestyle and attitude of its owner, every hotel has its own unique personality. Thus, hotel rooms represent the ideal relationship between individual inhabitants and their desired lifestyles.

Situated in Luhuitou Bay, this boutique hotel consists of 42 individual guest rooms with a diverse range of room styles.

Image Courtesy © LATITUDE

Image Courtesy © LATITUDE

  • Architects: LATITUDE
  • Project: Ammo Hotel
  • Location: Sanya, China
  • Software used: Autocad 2013, 3D Studio Max 2013, Adobe Photoshp CS6, Adobe Illustrator CS6
  • Year: 2014
  • Type: Commission
  • Status: Proposal
  • Client: Ammo Catering Culture Co., Limited
  • Program: 2,600sqm for 42 rooms + 1,500sqm for common facilities
  • Chief Designer: Manuel N. Zornoza
  • Project Manager: Lihui Sim
  • Team: Andrea Ramos Rodriguez, Bo Liu, Jersy Biel, Jorge Cortes de Castro, Lisa Bai, Li Xiang, Lucia Bravo Guinea

(more…)

Eucaliptos House in JAL, Mexico by MO+G taller de arquitectura

Wednesday, January 14th, 2015

Article source: MO+G taller de arquitectura

The project is comprised of two stages, the first of 195m2, the second of 25m2 for a total of 220m2 on a plot of 390m2, which is located within a subdivision located in to the south of the metropolitan area of the city of Guadalajara.

Image Courtesy © Fabrica de Arquitectura

Image Courtesy © Fabrica de Arquitectura

  • Architects: MO+G taller de arquitectura
  • Project: Eucaliptos House
  • Location: Tlajomulco de Zúñiga, JAL, Mexico
  • Photography: Fabrica de Arquitectura (Miguel Valverde Hernández y Helmer Murayama Caro)
  • Software used: hand drawing, AutoCad, Sketchup Pro, and Photoshop CS5.
  • Design Team: Arq. Andrés MayorgaGarcíaRulfo, Arq. Diego González Díaz Ochoa y Arq.LeopoldoOrendain Ruiz Escoto.
  • Project Area: 195.0 m2
  • Project Year: 2014

(more…)

Hair salon “SLUNDRE” in Fukushima, Japan by Cohta Asano / BHIS

Wednesday, January 14th, 2015

Article source: Cohta Asano / BHIS

Hair salon “SLUNDRE” is a renovation project in the 2nd floor part of the store construction in Iwaki city , Fukushima.

“SLUNDRE” means “slow and sure”. It’s named by its owner.

Image Courtesy © Toshiyuki Azuma

Image Courtesy © Toshiyuki Azuma

  • Architects: Cohta Asano / BHIS
  • Project: Hair salon “SLUNDRE”
  • Location: 2F 3-3-9 Kubo Kashima-machi Iwaki city Fukushima Japan
  • Photography: Toshiyuki Azuma
  • Software used: 3DCAD “Sketch up” and 2DCAD “Vectorworks” and making “model”
  • Area: 136.9 sqm
  • Year: 2014
  • Manufacturers: KEYTEC

(more…)

TY in Tokyo, Japan by Yo Yamagata Architects

Tuesday, January 13th, 2015

Article source: Yo Yamagata Architects

The site is located in residental area of south part of Tokyo. We designed this house into simple three steps of planning process. 1. Dig the trench in the ground, and bury bedrooms. 2. Float a maximum volume according to the scenic zone regulation on the trench. 3. Cut off the corner of the volume to be open to the sly. Cut off volume supply sunlight to living space and permeate through the plastic grating to the lower floor.

Image Courtesy © Yo Yamagata Architects

Image Courtesy © Yo Yamagata Architects

  • Architects: Yo Yamagata Architects
  • Project: TY
  • Location: Tokyo, Japan
  • Software used: AutoCad, Vectorworks and SketchUp

(more…)

Cut Paw Paw in Victoria, Australia by ANDREW MAYNARD ARCHITECTS

Tuesday, January 13th, 2015

Article source: ANDREW MAYNARD ARCHITECTS 

What?
Cut Paw Paw is a renovation and extension to a double fronted weatherboard home in Seddon, Victoria, Australia. Name?
Cut Paw Paw is the name of the parish in which the house presides, and a name that the owners liked very much. It’s a weird name, hence we like it too.

Image Courtesy © Peter Bennetts

Image Courtesy © Peter Bennetts

  • Architects: ANDREW MAYNARD ARCHITECTS 
  • Project: Cut Paw Paw
  • Location: Victoria, Australia
  • Photography: Peter Bennetts
  • Software used: Vectorworks and Sketchup
  • Directors: Mark Austin and Andrew Maynard
  • Project Architect: Mark Austin
  • Builder: Marcus Hamilton
  • Completion date: March 2014

(more…)

Black Box in Gyeonggi-do, South Korea by Utaa

Tuesday, January 13th, 2015

Article source: Utaa

The BLACK BOX is located in Pangyo-dong, which began under the plan to create a sustainable urban environment in order to provide urban-space to ensure regional development and space in the city centre. There has residential area for single families.

Image Courtesy © Chin Hyosook

Image Courtesy © Chin Hyosook

  • Architects: Utaa
  • Project: Black Box
  • Location: Pangyo-dong, Bundang-gu, Gyeonggi-do, South Korea
  • Photography: Chin Hyosook
  • Software used: SketchUp and CAD
  • Architect In Charge: Kim Chang Gyun
  • Design Team: Choi Byung Yong, Jo Myeong Seon
  • Area: Site area(226.60㎡), Bldg. area(104.81㎡), Total floor area(183.37㎡)
  • Year: Mar 2014
  • Structure: Reinforced concrete + Light-weight wood frame

(more…)

NURSERY CASA DO POVO DA MAIA in AÇORES, PORTUGAL by M – ARQUITECTOS

Friday, January 9th, 2015

Article source: M – ARQUITECTOS

Nowadays, more and more, collective equipments have been sustainably planned to respond the needs of a constant urban growing. So that, Maia village, on the north Shore of S.Miguel Island, has asked to plan a kindergarten for the wish and requirement of their inhabitants.

Image Courtesy © PAULO GOULART

Image Courtesy © PAULO GOULART

  • Architects: M – ARQUITECTOS
  • Project: NURSERY CASA DO POVO DA MAIA
  • Location: PONTA DELGADA, S.MIGUEL, AÇORES, PORTUGAL
  • Photography: PAULO GOULART
  • Software used: AutoCad, 3dStudioMax, V-Ray and Photoshop
  • Client: CASA DO POVO DA MAIA
  • Área de construção: 670m2
  • GPS Coordinates: 37.832341, -25.393998
  • Project year: 2010
  • Inauguration: 2013
  • Architect in charge: ARCH. FERNANDO MONTEIRO
  • Collaborators: ARCH. MARCO RESENDES, ARCH. MIGUEL SOUSA, ARCH. DIANA POLICARPO, ARCH. PEDRO FURTADO, ARCH. EST. MARIA BENTO, ARCH. EST. SUSANA FERREIRA
  • Stability and infrastructure: INTEGRAL, ESTUDOS DE ENGENHARIA, Lda; ENG. ARSÉNIO COUTO;
  • Construction: JOÃO VIEIRA & FILHOS, Lda

(more…)

Trübel in Zürich, Switzerland by L3P Architekten ETH FH SIA AG

Friday, January 9th, 2015

Article source: L3P Architekten ETH FH SIA AG

After the removal of border limit clearances only 5m x 9m are left overin this small steep lot at the vineyard at Dielsdorf. With a maximum of 83 m2above-ground level living, this lot has long been considered unbuildable. A classical residential house with solid outer walls, conventional access staircase and traffic area has no space on this site.

Image Courtesy © Vito Stallone

Image Courtesy © Vito Stallone

  • Architects: L3P Architekten ETH FH SIA AG
  • Project: Trübel
  • Location: Rebberg, CH- 8157 Dielsdorf, Zürich, Switzerland
  • Photography: Vito Stallone
  • Software used: Nemetschek – AllPlan
  • Building Constructor: Private Owner
  • Building Engineer: Bona + Fischer Ingenieurbüro AG
  • Landscape Gardeners: vetschpartner Landschaftsarchitekten AG
  • Light Planner: Lichtblick, Neufeldweg 6
  • Building Physics: WichserAkustik&Bauphysik AG
  • Project and Realisation: 2006 - 2014
  • Lot Size: 291m2

(more…)

TWO HOUSES CONDE in Buenos Aires, Argentina by Hitzig Militello arquitectos (HMA)

Thursday, January 8th, 2015

Article source: Hitzig Militello arquitectos (HMA)

Connections

From the beginning this project had to respond to two different voices, or two clients. Both required the same amount of square meters for their future homes. It is perhaps the greatest achievement of this project, having understood how to complete the entire buildable volume equally for both owners, and without losing the ability to have access to almost all of the terrain. The strategy chosen was to cross-distribute the meters that corresponded to each owner, so that both units rotate through the central axis of the patio in a centrifugal manner. To achieve the crossed connection of the two properties without wasting useful meters, we took the decision to “externalize” the stairs, like sleeve-bridges connecting both units.

Image Courtesy © Federico Kulekdjian

Image Courtesy © Federico Kulekdjian

  • Architects: Hitzig Militello arquitectos (HMA)
  • Project: TWO HOUSES CONDE
  • Location: Ciudad Autónoma de Buenos Aires, Argentina
  • Photography: Federico Kulekdjian
  • Software used: Autocad 2010
  • Project_ Documentation_ Construction: HM.Arquitectos _ Fernando Hitzig & Leonardo G. Militello
  • Client: Private
  • Collaborators: Rubén Ruiz, Virginia Bottan
  • Constructor: Estudio hma
  • Structure Advisor: Carlos Gandini
  • Total Covered Surface: 300 m2
  • Total Uncovered Surface: 182 m2
  • Project Year: 2011-2012

(more…)

New Calais conference centre in France by Arte Charpentier Architectes

Thursday, January 8th, 2015

Article source: v2com

Arte Charpentier, the lead architect, will design the new Centre de Congrès et de Spectacles de Calais, in partnership with Abciss-Architectes, as part of a consortium led by the Rabot Dutilleul Group.

Arte Charpentier Architectes presented an ambitious plan for the major cultural facility, to be located on an 18,000 sqm oceanfront site. Featuring rounded contours, it is designed to make the most of the site’s exceptional views: the port to the east; the sea and spa district to the north; and to the south, the city and its historic monuments such as the Risban fort, lighthouse, watchtower and City Hall. The conference and performing arts centre is a strong iconic structure that will focus perspective, giving it more power without concealing the sea view and providing instant appeal to the waterfront.

Image Courtesy © Arte Charpentier Architectes

Image Courtesy © Arte Charpentier Architectes

  • Architects: Arte Charpentier Architectes 
  • Project: New Calais conference centre
  • Location: Calais, France
  • Software used: SketchUp, AutoCAD and 3ds Max
  • Team: Rabot Dutilleul Partenariats (consortium leader), CIPPER, Rabot Dutilleul Construction, Norlit, Sitex, Abciss-Architectes (Calais architect)
  • Engineering and design: PROJEX, Diagobat, Architecture Technique, AVEL Acoustique

(more…)




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise