Open side-bar Menu

Archive for the ‘S/W’ Category

The Arbor in Moscow, Russia by Kerimov + Prishin Architects

Tuesday, November 1st, 2011

The arbor is designed to accommodate a family of 15 persons.

The arbor’ floor has 3 distinct zones which the architects call  “kitchen-furnace”, “dining room-drawing room” and “terrace-scene”.

Image Courtesy Ilya Ivanov

  • Architects: Kerimov + Prishin Architects
  • Project: The Arbor
  • Location: Moscow, Russia
  • Project team: Shamsudin Kerimov, Pavel Prishin
  • Project area: 36 m2
  • Project year: 2011
  • Photographs: Ilya Ivanov
  • Software used: 3dS Max and AutoCAD


Green Square in Bratislava, Slovakia by Urban Interventions + Vallo Sadovský Architects (designed using AutoCAD)

Tuesday, November 1st, 2011

Article source: Vallo Sadovsky Architects

The “Urban Interventions” civic association, in collaboration with the Vallo Sadovský Architects studio, have prepared an instant urban intervention under the bridge.

Green Square

  • Architects: Urban Interventions + Vallo Sadovský Architects
  • Project: Green Square
  • Location:Bratislava, Slovakia
  • Software used: AutoCAD


BOFFO Building Fashion in New York by Gage/Clemenceau Architects

Tuesday, November 1st, 2011

Article source: Gage/Clemenceau Architects

Gage / Clemenceau Architects is collaborating on the design and production of a temporary installation with Nicola Formichetti, Fashion Director for Lady Gaga, Creative Director for Mugler as well as fashion stylist to Uniqlo, MAC and V Magazine. This collaboration is intended to produce an installation that experimentally fuses ideas from both fashion and architecture into a new type of physical environment, accessible to the general public, for a two week period coinciding with Fashion Week in New York City, in September 2011.    The stakes for this particular installation are high– as it will be housing not only the latest in Formichetti’s work, but will also include several original ensambles he has designed for Lady Gaga who has worn them in her performances and various red-carpet events.

Nicola Formichetti Store (Boffo)

  • Architects: Gage/Clemenceau Architects
  • Project: BOFFO Building Fashion/ Nicola Formichetti Store
  • Location: New York, USA
  • Software used: AutoCAD, AutoCAD 3D, Maya, 3dS Max and Showcase


Modern Villa in Den Haag, Netherlands by BBVH Architecten BV

Tuesday, November 1st, 2011

Article source: BBVH Architecten BV

This modern villa, design by Rotterdam bases architecture studio BBVH Architecten, is located in a new suburb of Den Haag and designed for the owner of a furniture company. The dynamic architecture is characterized by it’s dark colors and large cantilevering terraces. Oriented at the waterfront, the house is designed to enjoy the view of the surroundings.

Image Courtesy Luuk Kramer

  • Architects: BBVH Architecten BV
  • Project: Modern Villa
  • Location: Den Haag, Netherlands
  • Constractor: BB-X, Oud Beijerland, Netherlands
  • Developer: Willson Real Estate, Oud-Beijerland, Netherlands
  • Photography: Luuk Kramer, Amsterdam, Netherlands
  • Client: Private
  • Project year: 2009
  • Software used: Autocad, Sketchup, 3dStudio and a lot of sketchpaper for the design.
  • Materials:
    Fibre-C glass fibre reinforced concrete panels
    StrikothermBluClad plaster


Small Swedish House in Höganäs, Sweden by DinellJohansson (designed using MicroStation)

Sunday, October 30th, 2011

Article source: DinellJohansson

This small summerhouse at the coast of Höganäs was modeled after Palladios famous villas in the Veneto. Different from those extraordinary estates, this house is all about spatial economy. The goal was to create a maximum amount of spatial subdivisions in a building whose size was limited by budget constraints. With Palladios villas it shares the intriguing quality of the cross shaped space and the idea of summer life as an utterly joyful experience.


Small Swedish House

  • Architects: DinellJohansson
  • Project: Small Swedish House
  • Location: Tallbacken, Höganäs, Sweden
  • Working drawings: N59 arkitekter
  • Completion year: 2010
  • Area: 57sqm
  • Photographs: Antonius van Arkel and DinellJohansson
  • Software used: Bentley Microstation v8


Winery Nals Margreid in Bozen, Italy by Markus Scherer Architekt (designed with MicroStation)

Sunday, October 30th, 2011

Article source: Markus Scherer Architekt

Nals is located at the bottom of the Sirmiane hill embedded in a scenery of wine and fruit. The porphyry walls of the mountain ridge break through this grapelandscape and form with their dark brownred colour a strong contrast to the lovely scenery of wine.

Night view of the winery

  • Architects: Markus Scherer Architekt
  • Project: Winery Nals Margreid
  • Location: Nals, Bozen Italy
  • Client: Kellerei Nals-Margreid
  • Costruction volume: 4.100 m³ above ground and 10.200 m³ below ground
  • Construction supervisor: Markus Scherer, Meran _ Büro Weiss, Bozen
  • Collaborator: Heike Kirnbauer
  • Structural engineering: Weiss, Bozen
  • Safety coordinator: Weiss, Bozen
  • Electrical and domestic engineering: Energytech
  • Software used: Microstation V8


Hair Very Salon in Hiroshima, Japan by MAKER (designed with Vectorworks)

Sunday, October 30th, 2011

Article source: MAKER

Salon located in the provincial city of Kure, Hiroshima, Japan. Been expected to become a community space in the area. This salon suppose to be for all ages. Therefore no sense of limitation, the image of the design had to be favorable for all ages.

Cut space we can feel the depth of space

  • Architects: MAKER
  • Project: Hair Very Salon
  • Location: Kure-shi, Hiroshima, Japan
  • Project Type: Shop (hair salon)
  • Site Area: 64.65 sq m
  • Cost of Construction: 3,000,000 JPY
  • Date of completion: June 2009
  • Software used: VectorWorks


Casa Locarno in Solduno, Switzerland by Designyougo (rendered using Maxwell)

Sunday, October 30th, 2011

Article source: Designyougo – Architects and Designers


The site for this five bedroom house is located in Solduno, an old village with traditional stone clad roofs, close to Locarno, Switzerland. The amazing setting between the mountains and the lake gives the site a clear orientation with the main views towards Ascona and the lake “Lago Maggiore” to the front, and the steep mountains to the back.

Image Courtesy designyougo

  • Architects: Designyougo – Architects and Designers
  • Project: Casa Locarno
  • Location: Solduno, Switzerland
  • Local architect: Sabrina Portesan-Cavalli, Locarno, Switzerland
  • Solar Collectors: Jenni Energietechnik AG, Switzerland
  • Main Contractor: Veragouth S.A., Bedano, Switzerland
  • Photo credits: designyougo
  • Area: 178 m²
  • Façade: Swiss Pearl, Eternit AG, Larch Boards, Glulam (Larch)
  • Start of Construction: 2010
  • Occupancy: October 2010
  • Completion: June 2011
  • Software used: Maxwell render plugin for visualisations.


LegacyER in Frisco, Texas by 5G Studio Collaborative (designed using AutoCAD and Rhino 3D)

Sunday, October 30th, 2011

Article source: 5G Studio Collaborative, llc

LegacyER is a free-standing 6,200 GSF Emergency and Urgent Care facility in Frisco, Texas, consisting of Urgent Care Rooms, Special Treatment Rooms, Radiology Suites, and Trauma Suites organized around an elemental ceiling spine, originating from the point of patient entry, that bisects through the interior spaces.  Aiming for rigorous simplicity and clarity of occupant flow, spatial qualities are likewise mapped logically through the use of light, reflectivity, and translucency.

Southeast Corner (Image Courtesy Charles Davis Smith-AIA)

  • Architects: 5G Studio Collaborative, llc
  • Project: LegacyER
  • Location:Frisco, Texas, USA
  • Client Name: LegacyER
  • Structural Consultant: Armstrong-Douglass Partners, LLC
  • Mechanical, Electrical, and Plumbing Consultant:Telios, PC
  • General Contractor: Huffman Builders
  • Construction Completion: August 2008
  • Project Photography: Charles Davis Smith-AIA, Michael Hemme
  • Software used: AutoCAD, Rhino 3D, and PhotoShop


A Room Over the Sea in Molo Nord, Italy by Studio Zero85 (designed using Vectorworks)

Saturday, October 29th, 2011

Article source: Studio Zero85

Renovation of the “trabocco” above a port canal in Pescara
The trabocco is an old “fishing machine” typical of the Adriatic coast. These construction consist of a platform set on pilots above the sea. Horizontally is fixed by long poles or antennas, carring a large fishing net stem out from the platform.

Image Courtesy Sergio Camplone

  • Architects: Studio Zero85
  • Project: Trabocco: A Room Over the Sea
  • Location: Molo nord, Pescara (PE), ITALY
  • Design team: Mario Michetti, Giovanna Pizzella, Mirko Giardino
  • Project area: area of trabocco 24 mq, area of platform 112 mq
  • Project Year: 2005_2009
  • Photographs: Sergio Camplone
  • Structural enginee: Paolo Cerasoli
  • Furniture: euVivo, pescara
  • Software used: Vectorworks


GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley: Microstation Trial
TurboCAD pro : Start at $299 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy