Open side-bar Menu
 ArchShowcase

Archive for the ‘S/W’ Category

O’biz Tower Lobby design in Anyang-si, South Korea by anD + MOTOElastico

Friday, July 10th, 2015

Article source: anD + MOTOElastico

The lobby of an office building is a place where people transits and pass through; it is a ‘not-place’, almost by definition, as the airport waiting area, almost devoid of their own identity. It is an ‘object’ almost alien, home to almost strangers or people who have closely job relationships.

Image Courtesy © Ulla Reimer & YuJin Yeon

Image Courtesy © Ulla Reimer & YuJin Yeon

  • Architects: anD + MOTOElastico
  • Project: O’biz Tower Lobby design
  • Location: Anyang-si, South Korea
  • Photography: Ulla Reimer & YuJin Yeon
  • Software used: Cad software, Photoshop
  • Design Team:
    • anD – architecture natureDesign: architect Luca Villa
    • Assistant Yoon Kyung Ma
    • Rendering Bruno Bassani
    • Motoelastico Team: architect Simone Carena
    • Architect Marco Bruno
    • Architect MinJi Kim
    • Designer June Ho Kim
    • Architect Leroy Quentin
  • Area inside flooring: sqm. 545
    • Walls surfaces – ground floor: sqm. 840
    • Walls surfaces – first floor: sqm. 150
    • Ceiling surface – punched metal: sqm. 205
    • Ceiling surface – ground floor: sqm. 232
    • Ceiling surface – first floor: sqm. 105
    • Area outside flooring: sqm. 3130
    • Highness (max): m. 11,5

(more…)

Laiki Lefkothea Residence in Limassol, Cyprus by Tsikkinis Architecture Studio

Friday, July 10th, 2015

Article source: Tsikkinis Architecture Studio 

Area newly built, quiet countryside, peaceful conditions for family living Dynamic presence of free horizon to the gulf of Limassol city The conversion of space to place and maintain privacy The privacy as a mean of increasing the sense of land ownership Turning inward, the composition of the L-shaped form with internal covered veranda.

Image Courtesy © Tsikkinis Architecture Studio

Image Courtesy © Tsikkinis Architecture Studio

  • Architects: Tsikkinis Architecture Studio 
  • Project: Laiki Lefkothea Residence
  • Location: Limassol, Cyprus
  • Software used: Autodesk, Autocad, 3d max
  • Civil Engineer: George Kolonias
  • Electromechanical Engineer: Karantonis Kyriakos
  • Size: 260m² + 90m² covered verandas  + 70m² basement
  • Cost: €400000

(more…)

Formstelle in Töging am Inn, Germany by FORMAT ELF ARCHITEKTEN

Friday, July 10th, 2015

Article source: FORMAT ELF ARCHITEKTEN 

Located at the entrance of the industrial wasteland of the former VAW aluminum plants FORMSTELLE, Kantine and NETZWERK are creating an interdisciplinary, campus called NETWORK/NETZWERK – thus providing‚ evidence of a successful structural transformation from heavy industry towards the use by architects, engineers and designers. The floating, single-storey pavilion, placed under huge ancient trees, shows an altered handling of the material aluminum in an industrial region undergoing transition.

Image Courtesy © BETTINA KIRMEIER

Image Courtesy © BETTINA KIRMEIER

  • Architects: FORMAT ELF ARCHITEKTEN
  • Project: Formstelle
  • Location: Töging am Inn, Germany
  • Photography: BETTINA KIRMEIER
  • Software used: ArchiCAD 17, Sketchup 2015 + Vray 2.0, Photoshop

(more…)

HOUSE B in Munich, Germany by FORMAT ELF ARCHITEKTEN

Thursday, July 9th, 2015

Article source: FORMAT ELF ARCHITEKTEN

Located in the urban outskirts of Munich, the detached single-family house B built in timber frame construction was completed after only six months of construction. On the small plot the maximal possible cubature and the existing parameters have been used in an optimal way. The building follows line of the houses in the street and thus continues the urban edge along the link road. The front garden area next to the street is thereby supported and the roof orientation of the surrounding buildings continued.

Image Courtesy © FORMAT ELF ARCHITECTS

Image Courtesy © FORMAT ELF ARCHITECTS

  • Architects: FORMAT ELF ARCHITEKTEN
  • Project: HOUSE B
  • Location: 81245 Munich, Germany
  • Photography: CORDULA DE BLOEME
  • Software used: ArchiCAD 17, Sketchup 2015 + Vray 2.0, Photoshop

(more…)

Pavilion House in Portland, Oregon by Waechter Architecture

Thursday, July 9th, 2015

Article source: Waechter Architecture

Our clients wanted a glass house.  The difficulty was that they wanted this house placed on a visually exposed 50’ x 100’ city lot that they owned in NE Portland.  This posed the challenge of designing a glass house with privacy.  Our solution was to design a pavilion-like structure in which the body of the house is supported by 4 ten-foot tall “legs.”  The legs are placed strategically to block unwanted views and provide privacy.

Image Courtesy © Waechter Architecture

Image Courtesy © Waechter Architecture

  • Architects: Waechter Architecture
  • Project: Pavilion House
  • Location: Portland, Oregon, USA
  • Software used: PowerCADD and Adobe software
  • Owner: Kevin Battey
  • Size: 2300 square feet
  • Year Built: 2015

(more…)

Solar House in Canada by Nacho Gias

Thursday, July 9th, 2015

Article source: Nacho Gias 

Insight:

The project main idea lay on the sun interaction with a domo located in New Scotland, Canada.
The first step was to find out how the building reacts to sun light in different day key moments all along the year. The use of a 3d software allows me to figure out which areas would be exposed to sun light and which ones would be into shadow. At that point, I found an area that would be always exposed to light.

Image Courtesy © Jaime Diaz Alvarez

Image Courtesy © Jaime Diaz Alvarez

  • Architects: Nacho Gias
  • Project: Solar House
  • Location: Canada  
  • Photography: Jaime Diaz Alvarez
  • Software used: Sketchup, 3D Studio
  • Size:105 m²
  • Year: 2014
  • Status: Competition

(more…)

Hotel Indigo Helsinki Boulevard in Finland by Architects Soini&Horto Ltd

Wednesday, July 8th, 2015

Article source: Architects Soini&Horto Ltd

Hotel Indigo Boulevard is located in a historical boulevard in central Helsinki where the surrounding buildings have their origins from the the beginning of the 1800–‐1900s. The task was to transform the former office building into a modern hotel that would fit into the historical environment. The building went through an extensive renovation and only the concrete frame, built in the 60s, was preserved. The old pre–‐fabricated concrete façade was replaced with a new light construction wall. The boulevard facing  façade was clad with multidimensional zinc plating. The façade with its new insulaton makes the building very energy–‐ saving, consequently the hotel has been LEED–‐ classified.  Finnish design and local craftsmanship was used in hotel. The zinc façade was constructed by a 73–‐ year old local whitesmith Esko Kivi, who has been  in the business for 50 years.

Image Courtesy © Anders Portman and Martin Sommerschield

Image Courtesy © Anders Portman and Martin Sommerschield

  • Architects: Architects Soini&Horto Ltd
  • Project: Hotel Indigo Helsinki Boulevard
  • Location:Helsinki, Finland
  • Photography: Anders Portman and Martin Sommerschield
  • Software used: ArchiCAD
  • Architects in charge: Sami Horto, Teemu Asikainen
  • Interior designer: Markus Eskola
  • Area: 7730 sqm
  • Year: 2015

(more…)

Rocas House in Zapallar, Chile by Studio MK27 + 57STUDIO

Wednesday, July 8th, 2015

Article source: Studio MK27 + 57STUDIO 

Insertion of the project on the site. The implantation was designed as gentle as possible, in order to preserve the level difference of the site and the views. We created two side stone walls, like a programmatic box with the social and service areas of the house.

Image Courtesy © Fernando Guerra | FG+SG

Image Courtesy © Fernando Guerra | FG+SG

  • Architects: Studio MK27 + 57STUDIO
  • Project: Rocas House
  • Location: Zapallar, Chile
  • Photography: Fernando Guerra | FG+SG
  • Software used: Archicad
  • Author: Marcio Kogan
  • Project Year: 2010-2013

(more…)

VäSTERåS TRAVEL CENTER in Sweden by BIG

Tuesday, July 7th, 2015

Article source: BIG

Västerås Travel Center is a new transportation hub for trains, buses, taxis, bikes and pedestrians in the heart of Västerås – one of Sweden’s largest cities. The 17-acre project is part of the ambitious long-term urban redevelopment plan “3B – Build Away the Barriers” that seeks to redesign the area surrounding the railway station, reconnecting it to the city of Västerås.

Image Courtesy © BIG

Image Courtesy © BIG

  • Architects: BIG
  • Project: VäSTERåS TRAVEL CENTER
  • Location: Västerås, Sweden (59.6092,16.5472)
  • Software used: Autocad and Ahino
  • PROJECT TEAM
    • Partners in Charge: Bjarke Ingels, David Zahle
    • Project Leader: Kamilla Heskje
    • Team, Phase Two: Johan Bergström, Megan Cumming, Teodor Cristian Fratila, Malgorzata Mutkowska, Ioana Farţadi Scurtu, Magnus Garvoll, Nicolas Millot, Perle Van de Wyngaert, Andreas Klok Pedersen, Finn Nørkjær, Tobias Hjortdal
    • Team, Phase One: Andreas Klok Pedersen, Oscar Abrahamsson, Nicolas Millot, Camila Luise de Andrade Stadler, Gwendoline Eveillard, Franck Fdida, Giedrius Mamavicius
  • Collaborators: Tyréns, Kragh & Berghlund
  • Client: Västerås City, Jernhusen AB, Klövern AB
  • Size in m2: 12000
  • Status: In Progress
  • Code: VTC
  • Date: 02/06/2015

(more…)

House IT Havenkwartier in Deventer, Netherlands by Hoogte Twee Architects

Tuesday, July 7th, 2015

Article source: Hoogte Twee Architects

The Havenkwartier in Deventer is transforming from a site of companies to a vivid socio-economical urban area. With the conservation of old distinctive buildings and new firm and sturdy houses which accompany the industrial “harbour architecture”, House IT is a compact urban residence with a robust appearance.

Image Courtesy © Hoogte Twee Architects

Image Courtesy © Hoogte Twee Architects

  • Architects: Hoogte Twee Architects
  • Project: House IT Havenkwartier
  • Location: Deventer, Netherlands
  • Software used: Archicad

(more…)

Graphisoft ARCHICAD  Download a 30-Day FREE trial
Bentley: Be Inspired Awards
xponential2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy