Open side-bar Menu
 ArchShowcase

Archive for the ‘Vectorworks’ Category

Hair salon “SLUNDRE” in Fukushima, Japan by Cohta Asano / BHIS

Wednesday, January 14th, 2015

Article source: Cohta Asano / BHIS

Hair salon “SLUNDRE” is a renovation project in the 2nd floor part of the store construction in Iwaki city , Fukushima.

“SLUNDRE” means “slow and sure”. It’s named by its owner.

Image Courtesy © Toshiyuki Azuma

Image Courtesy © Toshiyuki Azuma

  • Architects: Cohta Asano / BHIS
  • Project: Hair salon “SLUNDRE”
  • Location: 2F 3-3-9 Kubo Kashima-machi Iwaki city Fukushima Japan
  • Photography: Toshiyuki Azuma
  • Software used: 3DCAD “Sketch up” and 2DCAD “Vectorworks” and making “model”
  • Area: 136.9 sqm
  • Year: 2014
  • Manufacturers: KEYTEC

(more…)

TY in Tokyo, Japan by Yo Yamagata Architects

Tuesday, January 13th, 2015

Article source: Yo Yamagata Architects

The site is located in residental area of south part of Tokyo. We designed this house into simple three steps of planning process. 1. Dig the trench in the ground, and bury bedrooms. 2. Float a maximum volume according to the scenic zone regulation on the trench. 3. Cut off the corner of the volume to be open to the sly. Cut off volume supply sunlight to living space and permeate through the plastic grating to the lower floor.

Image Courtesy © Yo Yamagata Architects

Image Courtesy © Yo Yamagata Architects

  • Architects: Yo Yamagata Architects
  • Project: TY
  • Location: Tokyo, Japan
  • Software used: AutoCad, Vectorworks and SketchUp

(more…)

Cut Paw Paw in Victoria, Australia by ANDREW MAYNARD ARCHITECTS

Tuesday, January 13th, 2015

Article source: ANDREW MAYNARD ARCHITECTS 

What?
Cut Paw Paw is a renovation and extension to a double fronted weatherboard home in Seddon, Victoria, Australia. Name?
Cut Paw Paw is the name of the parish in which the house presides, and a name that the owners liked very much. It’s a weird name, hence we like it too.

Image Courtesy © Peter Bennetts

Image Courtesy © Peter Bennetts

  • Architects: ANDREW MAYNARD ARCHITECTS 
  • Project: Cut Paw Paw
  • Location: Victoria, Australia
  • Photography: Peter Bennetts
  • Software used: Vectorworks and Sketchup
  • Directors: Mark Austin and Andrew Maynard
  • Project Architect: Mark Austin
  • Builder: Marcus Hamilton
  • Completion date: March 2014

(more…)

Fujigaoka T in Kanagawa, Japan by ChikaraOhno / sinato

Friday, January 2nd, 2015

Article source: ChikaraOhno / sinato

This project is a home for a family of three in one unit of a twenty-six year old apartment building.

Although the previous ceiling height was a uniform 2450mm, after checking the structural drawings we realized that the existing height was the minimum required due to the placement of a services pit above, with the slab actually much higher in places, so we proceeded in planning the layout considering this height.

Image Courtesy © Toshiyuki Yano

Image Courtesy © Toshiyuki Yano

  • Architects: ChikaraOhno / sinato
  • Project: Fujigaoka T
  • Location: Fujigaoka, Kanagawa, Japan
  • Photography: Toshiyuki Yano
  • Software used: Vectorworks on Mac
  • Area: 68.2 sqm
  • Client: individual
  • Completion: 03/2014

(more…)

White hut and Tilia japonica in Saitama, Japan by Takahashi Maki+Shiokami Daisuke/Takahashi Maki and Associates

Friday, January 2nd, 2015

Article source: Takahashi Maki+Shiokami Daisuke/Takahashi Maki and Associates

The building was rebuilt in a residential area developed in the 1960s that was used as rice fields, and prior to that a likely Arakawa dis-tributary.

Image Courtesy © Takahashi Maki and Associates

Image Courtesy © Takahashi Maki and Associates

  • Architects: Takahashi Maki+Shiokami Daisuke/Takahashi Maki and Associates
  • Project: White hut and Tilia japonica
  • Location: Saitama, Japan
  • Photography: Shigeta satoshi / Nacasa & partners inc., Takahashi Maki and Associates
  • Software used: Vectorworks
  • Site area: 38.05 sqm
  • Building area: 20.95 sqm
  • Total floor area: 57.95 sqm
  • Year: 2010
  • Structural engineers: Moribe Yasushi/Moribe Yasushi lab(Showa Women’s University)
  • General contractors: Shishido building firm

(more…)

New building Drehmo Wenden in Germany by wurm + wurm architekten

Wednesday, December 17th, 2014

Article source: wurm + wurm architekten

In Wenden, the southernmost town of the german region of Sauerland electro mechanical actuators for water management, the power plant sector and the oil and gas industry are manufactured.

The special cut of the new building of the Drehmo GmbH is owed the topographical situation in this region. The moving landscape caused the terracing of the landscape and produces irregularly shaped lot. The unusual floor plan, generated by this contour, and the hillside situation with a view over the valley determine the character and exceptional styling.

Image Courtesy © Ester Havlova, Walter Fogel

Image Courtesy © Ester Havlova, Walter Fogel

  • Architects: wurm + wurm architekten
  • Project: New building Drehmo Wenden
  • Location: Wenden, Germany
  • Photography: Ester Havlova, Walter Fogel
  • Software used: AutoCad, Vectorworks and Cinema4D
  • Client: Drehmo GmbH Zum Eichstruck 10, 57482 Wenden
  • Support structure planning: GmbH, Bühl
  • Square metres7500 m²
  • Design: 2009
  • Completion: 2013

(more…)

Belfry Tashkent in Uzbekistan by Ippolito Fleitz Group GmbH

Saturday, December 6th, 2014

Article source: Ippolito Fleitz Group GmbH

Ippolito Fleitz Group has designed the interior architecture of the Uzbekistan International Forums Palace, located on Amir Timur Square in the heart of the Uzbek capital Tashkent. The palace was ceremonially opened in September 2009 to celebrate the occasion of Tashkent’s 2200th anniversary. A jewellery shop, housed in one of two historic bell towers providing the design prelude to this representative ensemble on Amir Timur Square, was also designed as part of the project.

Image Courtesy © Zooey Braun

Image Courtesy © Zooey Braun

  • Architects: Ippolito Fleitz Group GmbH
  • Project: Belfry Tashkent
  • Location: TashkentUzbekistan
  • Photography: Zooey Braun
  • Software used: Vectorworks
  • TEAM: Peter Ippolito, Gunter Fleitz, Tilla Goldberg, Steffen Ringler, Alexander Fehre, Christian Kirschenmann
  • Lighting Design: pfarré lighting design, München
  • General Contractor: RIEDL Messe-/Laden- & Objektbau GmbH, Pfaffing

(more…)

Seto in Hiroshima, Japan by Mount Fuji Architects Studio

Friday, November 28th, 2014

Article source: Mount Fuji Architects Studio

A shipbuilder’s company housing on a cliff that views beautiful and calm Seto Inland Sea, where small islands float. This project is expected to revitalize a local industrial city while serving as comfortable accommodations for 37 families. On the roof that extends from ground level uphill, the rooftop plaza, a rare public space in the hilly town spreads.

Image Courtesy © Ken'ichi Suzuki

Image Courtesy © Ken’ichi Suzuki

  • Architects: Mount Fuji Architects Studio / Masahiro Harada + MAO 
  • Project: Seto
  • Location: Fukuyama, Hiroshima, Japan
  • Photography: Ken’ichi Suzuki
  • Software used: vectorworks, Illustrator
  • Design Team: Naoto Ishii, Tetsuya Mizukami
  • Client:TSUNEISHI SHIPBUILDING Co.,Ltd.
  • Principal use: Company housing
  • Site area: 1934.84m2

(more…)

3.1 Phillip Lim MICROCOSM in Tokyo, Japan by Schemata Architects / Jo Nagasaka

Friday, November 21st, 2014

Article source: Schemata Architects / Jo Nagasaka

This is 3.1 Phillip Lim 2014 Pop- Up store at Shinjuku Isetan, which opens from April 2014 for six months.
This time the shop is located on the third floor of the department store, which had a space with a strong character. We attempt to make five renewals in 6 months, and at this stage we have done two renewals.
In this project, we focus on the brand philosophy of 3.1 Phillip Lim. Several sets of “almost” opposing words are given. “Almost” is the keyword that represents the wide scope of their design directions, and also it liberates their ways of thinking. The keywords are as follows.

PARCO

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

  • Architects: Schemata Architects / Jo Nagasaka
  • Project: 3.1 Phillip Lim MICROCOSM
  • Location: ISETAN SHINJUKU 3F 3-14-1 Shinjuku  Tokyo, Japan
  • Photography: Takumi Ota
  • Software used: Vectorworks
  • Project team: Masami Nakata/Schemata Architects
  • Usage: pop-up store
  • Construction: TANK
floor
  • Area: 68.2㎡
  • Period: 05/03/2014~09/2014

(more…)

CABANE de ZUCCa SHIBUYA PARCO in Tokyo, Japan by Jo Nagasaka/Schemata Architects

Friday, November 21st, 2014

Article source: Jo Nagasaka/Schemata Architects

This is the renovation of CABANE de ZUCCa SHIBUYA PARCO. When commissioned for the project, my initial thought was “Unbelievable….Can’t be true!”, because the CABANE de ZUCCa flagship in Omotesando was the shop I admired most when I was a boy fresh out of high school, although I was not a fashion-conscious type. I didn’t dare to enter but only peeked inside from the street, and I was intrigued and fascinated by the simple yet sophisticated shop design composed of galvanized steel frames-such material was rarely used for a shop interior during that time. The impression of the shop space still remains vivid in my memory.

Image Courtesy © Takumi Ota

Image Courtesy © Takumi Ota

  • Architects: Jo Nagasaka/Schemata Architects
  • Project: CABANE de ZUCCa SHIBUYA PARCO
  • Location: SHIBUYA PARCO 3F, 15-1 Udagawa-cho, Shibuya-ku, Tokyo, Japan
  • Photography: Takumi Ota
  • Software used: Vectorworks
  • Construction: TANK
  • Site area: 116.9m²
  • Structure: RC
  • Completion: 8/2014

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy