Open side-bar Menu
 ArchShowcase

Archive for the ‘Vectorworks’ Category

Cape Cod House in Wellfleet, Massachusetts by Messana O’Rorke

Sunday, December 9th, 2018

Article source: Messana O’Rorke

Located on the leeward side of Cape Cod the Indian Neck spit is the location of this Modernist inspired beach house. Nestled in pine forest and sand dunes looking out to the open water the house is designed to experience seasonal vitality of the location. A simple square of protected habitation, combining indoor and outdoor space under a canopy of lattice Cedar; existing Pitch Pines grow up through the structure providing additional shade. Raised up off the sand, the platform of the house becomes the stage on which a basic set of rooms are arranged, with the principle spaces focused across the broad veranda to Cape Cod Bay. A separate bunk-house with a partially enclosed outdoor shower protects the entrance from the rigors of wind and rain. On the sides of the house angled cedar boards are providing privacy and shade from the rising and setting sun.

Image Courtesy © Messana O’Rorke

  • Architects: Messana O’Rorke
  • Project: Cape Cod House
  • Location: Wellfleet, Massachusetts, USA
  • Software used: SketchUp, Vectorworks

(more…)

Two Stories Building in Toda, Japan by Organic Design Inc.

Tuesday, November 27th, 2018

Article source: Organic Design Inc.

Two Stories Building: exploring possibilities in commercial tenant buildings Commissioned design of this commercial tenant building was inspired by considering two main themes. First: how the design should relate to the neighborhood. We considered what aspects of the building should blend in and what statement it could make. As for the existing cityscape, until around the 1990s many buildings in this suburb featured conventional low gable roofs, hip roofs, or pavilion roofs. Flat roofs appeared in the past 15 years or so as condominiums, apartment complexes, and commercial buildings popped up here and there. Now these flat-roofed office buildings and condos are becoming more common here. Without any bustling city streets, shopping districts, or built-up commercial areas by train stations, a multi-story, flat-roof building would have looked somewhat out of place. The street in front is still fairly busy however, and people often pass by on their way to a nearby elementary school or park, or to a city office or public transportation at either end. After pondering the building’s volume and shape, we decided that the volume should not stand out from the skyline on this block, and that the shape should consist of gable roofs on a low-rise building that would seem familiar to the mix of generations here, like how the neighborhood has looked for years. And because it is a commercial tenant building in a largely residential area, we sought elements less reminiscent of a business than of a detached home. In this way, the shapes mimic other shapes found in the neighborhood. The second consideration in design was how to arrange a visitor’s approach to the businesses inside from the street. Specifically, we explored ways to act on psychological mechanisms as visitors pass from the door to the rooms inside. Before entering the rooms, visitors briefly pass through buffer zones (which we call “experience chambers”) that reset their mood. First, people’s latent desire for new experiences is roused even from the street in front as they notice a kind of dotted tunnel. Once they enter, the tunnel momentarily neutralizes the everyday world behind them, leading them onward. Similarly, a staircase leading to the second floor also serves as a mood-altering chamber, shifting their perspective the same way through a dotted, blue-colored static space before they enter the place of business. It gives the impression of a moderated connection between the collective, social world outside and the spaces of individual businesses within, instead of a direct connection.

Front-view-1, Image Courtesy © Organic Design Inc.

  • Architects: Organic Design Inc.
  • Project: Two Stories Building
  • Location: Toda, Japan
  • Software used: Autocad, Vectorworks

(more…)

Skycatcher in Vienna, Austria by X ARCHITEKTEN

Sunday, November 25th, 2018

Article source: X ARCHITEKTEN

Task

The Viennese district Wieden with its historic character and proximity to the city centre is the perfect place to live for the Austrian-Italian family. The only downside is the lack of personal outdoor space, a scarce commodity in this densely populated Wilhelminian city. Therefore, a new balcony is to complement the family’s living space with a small herb and vegetable garden as well as a dining table to enjoy mealtimes outside.

Image Courtesy © Hans Leitner

  • Architects: X ARCHITEKTEN
  • Project: Skycatcher
  • Location: Vienna, Austria
  • Photography: Hans Leitner
  • Software used: Vectorworks
  • Planning: X ARCHITEKTEN & Kopp Restauratoren
  • Engineering: Georg Walder
  • Floor space: 12 m² + Planting
  • Direct order: 2014
  • Completion: 2017

(more…)

Barrington Residence in California by ERIC ROSEN ARCHITECTS

Thursday, November 8th, 2018

Article source: ERIC ROSEN ARCHITECTS

The concept for the Barrington Residence, a single family home designed by Eric Rosen Architects completed in April of 2015, was derived from the site and context, the client’s desire for an indoor/outdoor living experience afforded by the southern California climate and inspiration from noted artist Gordon Matta-Clark’s Splitting.

Image Courtesy © Joe Fletcher Photography

  • Architects: ERIC ROSEN ARCHITECTS
  • Project: Barrington Residence
  • Location: California, USA
  • Photography: Joe Fletcher Photography
  • Software used: Vectorworks, SketchUp

(more…)

Conversion house in Ascona, Switzerland by wespi de meuron romeo architetti fas sa

Tuesday, November 6th, 2018

Article source: wespi de meuron romeo architetti fas sa

The existing house, which had to be converted, is situated in an interesting urban context close to the historical core of Ascona. It’s accessible by car and by foot directly from the village and it has a romantic palm tree garden with a spectacular view over the roofs towards the Lake Maggiore and the mountains.
Due to its steep slope, this area is strongly influenced by high retaining walls, which are usually made in traditional natural stone.

The existing house doesn’t have any relation to the architecture of the surroundings; its relation to the garden has a certain quality.

Image Courtesy © Hannes Henz, architecture photographer

  • Architects: wespi de meuron romeo architetti fas sa
  • Project: Conversion house
  • Location: Ascona, Switzerland
  • Photography: Hannes Henz, architecture photographer
  • Software used: Vectorworks
  • Engineer: de Giorgi & Partners, 6600 Muralto
  • Building physics: IFEC Consulenze SA, 6802 Rivera

(more…)

New concrete house in Caviano, Schwitzerland by wespi de meuron romeo architetti fas sa

Monday, November 5th, 2018

Article source: wespi de meuron romeo architetti fas sa

The house, designed as a residence for a family of three persons, was built in the immediate proximity of the architecture office in Caviano on the Lake Maggiore.

In terms of adequate architectural densification new living space should be created on a remaining area of just 128 m2, on the same plot as the architecture office was built in 1981, without damaging the existing qualities. On the contrary, an enrichment of the outer spatial situation should be generated with reasonable densification in context with the existing building.

Image Courtesy © Hannes Henz, architecture photographer

  • Architects: wespi de meuron romeo architetti fas sa
  • Project: New concrete house in Caviano
  • Location: 6578 Caviano, Gambarogno, Tessin, Schwitzerland
  • Photography: Hannes Henz, architecture photographer
  • Software used: Vectorworks
  • Engineer: de Giorgi & Partners, 6600 Muralto
  • Building Physics: IFEC Ingegneria SA, 6802 Rivera
  • Master Builder: Canonica SA, 6600 Locarno
  • Building Cost: CHF 750’000.- (excl. VAT)
  • Volume (incl. courts): 530 m3

(more…)

Hopscotch House in Saitama, Japan by Hideyuki Hiramoto

Sunday, October 28th, 2018

Article source: Hideyuki Hiramoto 

This family who had lived individually decided to live together under one roof. In this project I tried to design a space that allowed these people who were used to living alone build an agreeable friendship by keeping a moderate distance from each other.

Caring for ease of access, a one-story house was requested. I thought hard about how to bring light and wind into the center of the house.

I divided the building into parts, each with their own function, and placed them in a layout “1+2+1+2+1” like Hopscotch game. By doing this, I led the house to the following solutions;

Image Courtesy © Koji Fujii (Nacása&Partners Inc.)

  • Architects: Hideyuki Hiramoto
  • Project: Hopscotch House
  • Location: kita-ku, saitama-shi, saitama, Japan
  • Photography: Koji Fujii (Nacása&Partners Inc.)
  • Software used: Vectorworks
  • Construction: KOBAYASHI CO.,LTD
  • Total Floor Area: 155 sqm / one-story / wooden structure

(more…)

Iron Maiden House in Sydney, Australia by CPLUSC ARCHITECTURAL WORKSHOP

Wednesday, October 17th, 2018

Article source: CPLUSC ARCHITECTURAL WORKSHOP

Shortlisted in the 2018 World Architecture Festival and Houses Awards, Iron Maiden House is located in Sydney’s lower North Shore and draws on it’s local context and history to create a unique contemporary home.

Iron Maiden House was designed for a family of five who wanted a home which celebrated the Sydney climate. The design delivers generous rooms which flow to inward facing outdoor areas at ground level, while an elevated external corridor connects the children’s bedrooms, enabling the children to build their independence while enjoying private green space.

Front-Facade-Far, Image Courtesy © Murray Fredericks

  • Architects: CPLUSC ARCHITECTURAL WORKSHOP
  • Project: Iron Maiden House
  • Location: Sydney, Australia
  • Photography: Michael Lassman, Murray Fredericks
  • Software used: Vectorworks, Rhino, Revit

(more…)

Floating Pavilion Meerstad in The Netherlands by LYVR architecten

Friday, October 12th, 2018

Article source: LYVR architecten

Assignment
In november 2014 the Municipality of Groningen commissioned LYVR for the design of a new accommodation for Bureau Meerstad / GEMM.

New residential area Meerstad 

Bureau Meerstad is an organization that is responsible for the implementation of the plans for the new residential area “Meerstad”. This area is positioned around, and partially on, a newly-made lake. The development for Meerstad started a few years ago, the initial plan was to build 10.000 dwellings in this area. The plan will be achieved in approximately 25 years. The total planning area is gradually established, so the different residential areas can ‘operate’ on it’s own. “Meeroevers” is the first residential area that is being realized.

Image Courtesy © LYVR architecten

  • Architects: LYVR architecten
  • Project: Floating Pavilion Meerstad
  • Location: Waterviolier 2, 9613 BH Meerstad, The Netherlands
  • Software used: Vectorworks, Artlantis
  • Client: Municipality of Groningen, Department ROEZ
  • User: Bureau Meerstad
  • Engineering & Contractor: INVRAplus
  • Subcontractor units: ELA
  • Area:750 sq m gross floor area
  • Start Design: November 2014
  • Start Construction: April 2015
  • Completion: October: 2015

(more…)

Easton Residence in California by Diebel and Company | Architects

Friday, October 12th, 2018

Article source: Diebel and Company | Architects

Easton Residence is a modern departure from 1920s California Spanish architectural grandeur. Its original romantic charm is transformed with modern design. The design blends previous expansions with a sleek reconfiguration of the house for contemporary living. It has a modern take on characteristic stucco walls, low-pitched clay tile roofs, sweeping arches, and wrought-iron railings.

Image Courtesy © Obeo

  • Architects: Diebel and Company | Architects
  • Project: Easton Residence
  • Location: California, USA
  • Photography: Obeo
  • Software used: Vectorworks
  • Architectural Design: Gary Diebel, AIA Architect
  • General Contractor: Pacific Coast Builders
  • Site Area: 7436 square feet (691 square meters)
  • Gross Floor Area: 4122 square feet (383 square meters)
  • Completion Date: November 2017

(more…)




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise