Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

Interior Design in the Parrote Car Park in Galicia, Spain by Díaz y Díaz Arquitectos

 
March 25th, 2017 by Sumit Singhal

Article source: Díaz y Díaz Arquitectos

The Parrote car park is already a reality eleven years after the works had been awarded and after four years stoped, between 2008 and 2012, during this time it was necessary to adapt the project to the archaeological remains that were found in the area.   The car park has two entrances. You can access both by Puerta Real and by the San Anton Castle. In the case of the first, this is a temporary entry while the tunnel in construction to connect the underground of the Marina is not ended, which will connect with the Parrote, the entrance will be located underground. The car park has 610 spaces.

Image Courtesy © Héctor Santos-Díez

  • Architects: Díaz y Díaz Arquitectos (Lucas Díaz Sierra, Gustavo Díaz García)
  • Project: Interior Design in the Parrote Car Park
  • Location: A Coruña, Galicia, Spain
  • Photography: Héctor Santos-Díez
  • Area: 18.545 m²
  • Date: 2014

Read the rest of Interior Design in the Parrote Car Park in Galicia, Spain by Díaz y Díaz Arquitectos

Sele PR and Organization Office in Istanbul, Turkey by Septagram

 
March 24th, 2017 by Sumit Singhal

Article source: pRchitect communications consultancy

A Simple But Splendid Touch At History by Septagram

The interior design of the new office of Sele PR and Organization by Istanbul based Septagram draws attention with its postmodern style reflecting the metropolitan identity of the company.

Image Courtesy © Septagram

  • Architects: Septagram
  • Project: Sele PR and Organization Office
  • Location: Istanbul, Turkey
  • Total Project Area: 300 sqm

Read the rest of Sele PR and Organization Office in Istanbul, Turkey by Septagram

Shishka Bar in Staraya Basmannaya, Russia by IITM Architect

 
March 24th, 2017 by Sumit Singhal

Article source: IITM Architect

Place:

An old one-storey building in the historic center of Moscow. After a reconstruction, the ceilings were elevated to 5.8 meters and gothic style panoramic windows were installed, a few years before our project began.

  • Architects: IITM Architect
  • Project: Shishka Bar
  • Location: Moscow, Staraya Basmannaya Street
  • Materialization: 2016 – 2017

Read the rest of Shishka Bar in Staraya Basmannaya, Russia by IITM Architect

Hotel Proverbs Taipei in Taiwan by RAY CHEN +PARTNERS ARCHITECTS

 
March 24th, 2017 by Sumit Singhal

Article source: RAY CHEN +PARTNERS ARCHITECTS

The site of Hotel Proverbs is located at the heart of Taipei City central where the MRT, night market, department stores, public park and densely occupied apartments create a vibrant and busy area 24-7. To take full advantage of – and to mediate – this lively and yet extremely intricate urban condition, the building splits diagonally into two parts: the upper 42 hotel rooms and the lower hotel amenities. The lower part is pushed back from the park side to make space for the trees indigenous to the site. The upper part, on the other hand, is shifted forward to lean into the park while maintaining an accommodating distance from the apartments closely situated behind the hotel.

Image Courtesy © Shawn Liu Studio

  • Architects: RAY CHEN +PARTNERS ARCHITECTS
  • Project: Hotel Proverbs Taipei
  • Location: No.56, Sec.1, Da’an Rd., Da’an District, Taipei 106, Taiwan
  • Photography: Shawn Liu Studio; Takahiro Nedachi
  • Client: Gloria Hotel Group
  • Structural System: Reinforced concrete beam-column system
  • Exterior Finish: Off-form concrete + expanded metal screen
  • Interior Design: Ray Chen International
  • Building Floors: B3-11F
  • Site Area: 834 sqm.
  • Project Area: 2500 sqm
  • Completion: 01/2016

Read the rest of Hotel Proverbs Taipei in Taiwan by RAY CHEN +PARTNERS ARCHITECTS

New York City Offices Complemented with Fashionable, Durable Banker Wire Mesh in Elevator Cabs

 
March 24th, 2017 by Sanjay Gangal

Article source: Banker Wire

Corporate tenants in 589 5th Avenue, a 17-story mid-century building in Midtown Manhattan, now have new elevator cabs to complement their redesigned corridors and existing lobby. The cabs are clad with Banker Wire mesh, offering a sophisticated look with unmatched durability.

A total of four elevators were redesigned and clad with Banker Wire’s DF-6 stainless steel woven metal mesh, in concert with frosted back-painted glass, LED lights and terrazzo tile.

Image Courtesy © Banker Wire

  • Manufacturer: Banker Wire
  • Project: New York City Offices Complemented with Fashionable, Durable Banker Wire Mesh in Elevator Cabs
  • Location: Manhattan, New York City, USA

Read the rest of New York City Offices Complemented with Fashionable, Durable Banker Wire Mesh in Elevator Cabs

MON factory / house in Kyoko- City, Japan by EASTERN design office

 
March 24th, 2017 by Sumit Singhal

Article source: EASTERN design office

The holes are lined up on a cross shape. The hole is made on the architecture like the perforated line. This architecture is “House with Crest”.

A light that penetrates into the architecture always moves and never stays. It is a symbolical spectacle. A light that goes through the hole is projected in a circle shape, moves unlimitedly, and never stays. Occasionally, it disappears, and it appears.

Image Courtesy © Koichi Torimura

  • Architects: EASTERN design office + HOJO STRUCTURE RESEARCH INSTITUTE
  • Project: MON factory / house
  • Location: Shimogyo-Ku, Kyoko- City, Kyoto-Prefecture, Japan
  • Photography: Koichi Torimura
  • Client name:  Morita MON factory
  • Project Team:  names of the in-house contributors, Anna Nakamura and Taiyo Jinno  EASTERN design office
  • Structural Engineer: HOJO STRUCTURE RESEARCH INSTITUTE
  • Site area: 236.90m2
  • Total floor area: 259.78m2
  • Completion: 2007

Read the rest of MON factory / house in Kyoko- City, Japan by EASTERN design office

Razorfish in Berlin, Germany by Batek Architekten

 
March 24th, 2017 by Sumit Singhal

Article source:  Batek Architekten

In the historic former cold storage building “Eierspeicher” on the north bank of the River Spree, Osthafen, Berlin, Bruzkus Batek architects have undertaken the redesign and comprehensive material and spatial conception of Razorfish’s 2500 sq m office space. The office occupies two levels, linked by pre-existing staircases. The elements of the new design enclose the building’s structure without disturbing it, working harmoniously with the existing elements, mainly using OSB.

Image Courtesy © Jens Bösenberg

  • Architects: Batek Architekten 
  • Project: Razorfish
  • Location: Berlin, Germany
  • Photography: Jens Bösenberg
  • Client: Team Ester Bruzkus, Patrick Batek, Anke Müller
  • Surface: ca. 1300 qm
  • Completion: September 2016

Read the rest of Razorfish in Berlin, Germany by Batek Architekten

Komatsu Seima Fabric Laboratory fa-bo in Nomi City, Ishikawa by Kengo Kuma & Associates

 
March 24th, 2017 by Sumit Singhal

Article source: Kengo Kuma & Associates

This is a renovation of an office building in rigid-frame RC structure to strengthen its quake resistance using carbon fiber, and transform the interior into a museum called Fab Labo, a space to display the technology of Komatsu Seiren, the client company. Drawing from a technique of braiding ropes in this region, it became possible to add further flexibility to the carbon fiber. The fiber rod is said to be seven times stronger than iron, and this is the very first time that this material was used as a means of reinforcement against earthquakes. The potential of this light and soft fiber is explored inside the building as well. There is a lighting duct in fiber and on the rooftop, an experimental greening is being conducted using porous ceramic panels (called Greenbiz), which was generated from the process of producing fiber.

Image Courtesy © Takumi Ota

  • Architects: Kengo Kuma & Associates
  • Project: Komatsu Seima Fabric Laboratory fa-bo
  • Location: 167 Hamacho Nomi, Nomi City, Ishikawa Prefecture
  • Photography: Takumi Ota
  • In charge: Kengo Shikama / Masayoshi Adachi / Masashi Haniya * / Tetsuo Yamasudo * / Kimio Suzuki / Masaki Sato / Shun Horiki / Hiroaki Masuko / Mizuho Ozawa / Mitako Izumi (Former employee)
  • Construction: Shimizu Corporation Hokuriku Branch
  • Structure: Ejiri Architectural Structural Design Office
  • Lighting: Izumi Izumi Lighting Design Office
  • Site area:  121, 485.30 m²
  • Design period: August 2013 – November 2014
  • Construction period: February 2015 – November 2015

Read the rest of Komatsu Seima Fabric Laboratory fa-bo in Nomi City, Ishikawa by Kengo Kuma & Associates

The Cement Factory in Sant Just Desvern, Spain by Ricardo Bofill Taller De Arquitectura

 
March 24th, 2017 by Sumit Singhal

Article source: Ricardo Bofill Taller De Arquitectura 

I found enormous silos, a tall smokestack, four kilometres of underground tunnels, and machine rooms in good shape. This was twenty five years ago and it was my first encounter with the Cement Factory.

I already imagined future spaces and noticed that the different aesthetic and plastic tendencies that had developed since World War 1 were present in this factory.

-Surrealism:

Image Courtesy © Ricardo Bofill Taller De Arquitectura

  • Architects: Ricardo Bofill Taller De Arquitectura 
  • Project: The Cement Factory
  • Location: Sant Just Desvern, Spain
  • Total floor area: m2 5.000 and gardens
  • House area: m2 500
  • Completed: 1975

Read the rest of The Cement Factory in Sant Just Desvern, Spain by Ricardo Bofill Taller De Arquitectura

NJ Villa in Bangkok, Thailand by TOUCH Architect Co.,Ltd.

 
March 24th, 2017 by Sumit Singhal

Article source: TOUCH Architect Co.,Ltd.

NJ Villa is a private residence owned by a couple, Nun and Jea. The name of this house derived from objectives that this villa should serve their lifestyles, and also represent their characters.

Land area of the house is 100 square wah (400 sq.m.) which is located in Bangkok, capital city of Thailand. The site is surrounded by other single detached house which has only the front side facing south, public street. Architectural design challenges to follow the context harmoniously.

Image Courtesy © Mr. Chalermwat Wongchompoo

  • Architects: TOUCH Architect Co.,Ltd.
  • Project: NJ Villa
  • Location: Nawamin 40, Bangkok, Thailand
  • Photography: Mr. Chalermwat Wongchompoo
  • Owner: Mr. Veerawit Benjaboonyazit / Ms. Nuntha Naudomsup
  • Principal Architect: Mr. Setthakarn Yangderm / Ms. Parpis Leelaniramol
  • Contractor: OKCON Co., Ltd.
  • Site Area: 100 sq.wa (400 sq.m.)
  • Floor Area: 435 sq.m.
  • Completion: 2017

Read the rest of NJ Villa in Bangkok, Thailand by TOUCH Architect Co.,Ltd.

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley:Microstation License
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy