Open side-bar Menu

Posts Tagged ‘Brisbane’

Project M in Brisbane, Australia by Studio 15b

Friday, September 16th, 2016

Article source: Studio 15b

This home was built in the 1950’s and over the years passed down the generations of the one family. Since originally built, the home had been altered in an ad-hoc way, and so the time had come for it to be stripped back to basics, raised and built-in and under for today’s modern lifestyle of the current family needs. This allowed Studio 15b to work with a clean slate which enabled us to re-orientate the spaces to best suit the northern rear aspect – creating the distinct sculptural M roof form.

Image Courtesy © Studio 15b

Image Courtesy © Studio 15b

  • Architects: Studio 15b
  • Project: Project M
  • Location: Brisbane, Australia
  • Software used: Revit


1930s Queenslander in Brisbane, Australia by Dion Seminara Architecture

Sunday, March 27th, 2016

Article source: Dion Seminara Architecture

Queenslanders are homes built up off the ground which are often falsely thought to be naturally cool in summer. They are actually designed to keep the area under the home cool. The homes themselves aren’t well insulated and can get quite hot.

Image Courtesy © Dion Seminara Architecture

Image Courtesy © Dion Seminara Architecture


Design a Series of Residential and Commercial Buildings Over an Existing Rail Yard in Brisbane, Australia by Hi-Tech CADD Services

Sunday, February 14th, 2016

Article source: Hi-Tech CADD Services

To integrate mix used development consisting of residence, office, mall, and hotel above an existing rail yard.

Solutions Targeted:

A rail yard and mixed use building were integrated into a single facility, and detailed 3D models for complete visualization and approvals were developed.

Image Courtesy © Hi-Tech CADD Services

Image Courtesy © Hi-Tech CADD Services

  • Architects: Hi-Tech CADD Services
  • Project: Design a Series of Residential and Commercial Buildings Over an Existing Rail Yard Using Architectural Services
  • Location: Brisbane, Australia
  • Software used: AutoCAD, Revit & 3ds Max (more…)

Hampton/Queenslander house renovation in Brisbane, Australia by Baahouse + Baastudio

Wednesday, March 4th, 2015

Article source: Baahouse + Baastudio

Set amongst a leafy hilly area in Brisbane’s inner city suburb Norman Park, Greg Taylor and Hayley Lewis approached Baahouse + BaaStudio to assist them for ideas and planning in renovating their existing 1880’s Queenslander family home. Their existing house is typical of many Queenslanders, whilst they have some aesthetically pleasing features’, the house was hidden from the street down a dark path, leading to a small cold house requiring a lot of upkeep and maintenance to bring it up to today’s modern living standards. Adding to the fact the house was cold and dark, there were many unusable spaces that could not be utilised, and the dining and lounge family areas were cramped and small.

Image Courtesy © Baahouse + Baastudio

Image Courtesy © Baahouse + Baastudio

  • Architects: Baahouse + Baastudio
  • Project: Hampton/Queenslander house renovation
  • Location: Brisbane, Australia


The Melbourne in Brisbane, Australia by Tony Owen Partners

Friday, September 5th, 2014

Article source: Tony Owen Partners 

The Melbourne is a 20 storey residential tower located on Brisbane’s Southbank. Melbourne Street occupies an important link between Southbank and the CBD and between the riverfront cultural precinct and the interior of Southbank. It is one of the major gateways to the city.

Image Courtesy © Tony Owen Partners

Image Courtesy © Tony Owen Partners


Queen Elizabeth II Courts of Law in Brisbane, Australia by Architectus

Wednesday, October 30th, 2013

Article source: Architectus

The Queen Elizabeth II Courts of Law have opened to much acclaim. The building is a radical departure from traditional court design. It exhibits a high degree of transparency and lightness appropriate to the expression of contemporary justice and to its sub-tropical locale.

Image Courtesy © Architectus

  • Architects: Architectus
  • Project: Queen Elizabeth II Courts of Law
  • Location: Brisbane, Australia
  • Client: Department of Public Works, Queensland Government
  • Approx. Value: $570m
  • Floor Area: 64 000m2
  • Completion: 2012
  • Software used: REVIT, Autocad, Adobe Photoshop and Indesign


  • 2013 AIA State Award
  • Public Buildings Category

Brisbane Ferry Terminals Post-Flood Recovery in Brisbane, Australia by Cox Rayner Architects

Tuesday, August 13th, 2013

Article source: Cox Rayner Architects

This soon-to-be-built project resulted from a design competition to conceive a new ferry terminal suite in the wake of the devastating 2011 Brisbane floods.

The aim of the project was to see if it were possible to design a flood-resilient ferry terminal to replace the 20 destroyed by the impact of water pressure and of debris crushing against the gangways and piles of the former terminals.

Image Courtesy © Cox Rayner Architects

  • Architects: Cox Rayner Architects
  • Project: Brisbane Ferry Terminals Post-Flood Recovery
  • Location: Brisbane,  Australia

The Left-Over-Space House in Brisbane, Queensland, Australia by Cox Rayner Architects

Tuesday, July 30th, 2013

Article source: Cox Rayner Architects

This narrow private house demonstrates what can be achieved on the myriad of ‘left-over’ spaces in inner cities, such as disused easements or parking lots.  In this case, a 3 metre wide tiny caretaker’s cottage, adjoining a Heritage Hall has been recycled and linearly extended into a family house for parents and two children.
The designers and owners Casey and Rebekah Vallance, two young talented architecture graduates who had topped their year at the University of Queensland, fell in love and married, bought the cheap, redundant lot in 2003.

Image Courtesy © Cox Rayner Architects

  • Architects: Cox Rayner Architects
  • Project: The Left-Over-Space House
  • Location: Brisbane, Queensland, Australia

West End Ferry Terminal in Brisbane, Australia by COX Rayner Architects

Tuesday, July 23rd, 2013

Article source: COX Rayner Architects

The West End Ferry Terminal is a small project that was designed to simultaneously generate a new typology for Brisbane’s Citycat Terminals and act as a sheltered social gathering space at the end of one of Brisbane’s historic riverfront parks, one endeared in the hearts of the West End community.
As a result, the whole conception of the terminal was subject to many community consultation events, most originally opposing removal of an existing brick post-war facility which had insurmountable CEPTED issues.

Image Courtesy © Christopher Frederick Jones

  • Architects: COX Rayner Architects
  • Project: West End Ferry Terminal
  • Location: Brisbane, Australia
  • Photography: Christopher Frederick Jones
  • Software used: Auto CAD and modelled using 3D Studio Max.

River Room in Chelmer, Brisbane, Australia by Shaun Lockyer Architects

Wednesday, June 5th, 2013

Article source: Shaun Lockyer Architects

This project involved the refurbishment and extension to a 1990’s cottage that had been substantially damaged during the January 2011 Brisbane River floods. The existing house enjoyed north east aspect river frontage but had very a poor connection to the river as well as massively underutilized living areas. The primary scope for the project involved the reconfiguration of the existing deck area into the “River Room”, conceived of an indoor/ outdoor space that could be calibrated by the clients to use year round. The space involves a chamfered trapezoid plan with a highly articulated glazed north-east facade. The glazed wall forms a solid barrier to the cold winter breezes while allowing complete openness and transparency during the warm summer months.

Image Courtesy Shaun Lockyer Architects


GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley: YII 2016
TurboCAD pro : Start at $299 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy