Open side-bar Menu
 ArchShowcase

Posts Tagged ‘France’

ZAC du Coteau in Arcueil, France by ECDM Architectes

Saturday, October 11th, 2014

Article source: ECDM Architectes  The idea was to extend the surface of the apartments by balconies representing a minima 50% of the living area with a drastic construction cost : 1350 € / sq.m. The project implements objective values where all the constructive and architectural aspects are drafted for their practical value and their economic performance.

Image Courtesy © M. Benoit Fougeirol

Image Courtesy © M. Benoit Fougeirol

  • Architects: ECDM Architectes
  • Project: ZAC du Coteau
  • Location: Arcueil, France
  • Photography: M. Benoit Fougeirol
  • Software used: Autocad

(more…)

NBJ Architectes Office in Montpellier, France

Wednesday, October 8th, 2014

Article source: NBJ Architectes

The offices of agency NBJ Architects take seat in the heart of the historic center of Montpellier, near the Prefecture. The building in which the project is established is an 18th Town Building classified Historic Monument. The operation of rehabilitation and transformation of a program of residences into offices able to accommodate a structured architectural office was directed mainly towards the interior of the building.

Image Courtesy © Paul KOZLOWSKI

Image Courtesy © Paul KOZLOWSKI

  • Architects: NBJ Architectes
  • Project: NBJ Architectes Office
  • Location: Montpellier, France
  • Photography: Paul KOZLOWSKI

(more…)

Entre Deux Rives in L’Île-Saint-Denis, France by PHILIPPON – KALT

Wednesday, October 8th, 2014

Article source: PHILIPPON – KALT

The Entre Deux Rives housing project, developed by the agency Philippon-Kalt, announces the start of the new Ile-Saint-Denis riverside green neighbourhood. The development will revitalize a former industrial wasteland. It includes 165 homes in 8 buildings ranging from 3 and 7 floors, spread over 3 small blocks.

Image Courtesy © Hervé Abbadie

Image Courtesy © Hervé Abbadie

  • Architects: PHILIPPON – KALT
  • Project: Entre Deux Rives
  • Location: 7 Quai du Chatelier, 93450 L’Île-Saint-Denis
  • Photography: Hervé Abbadie
  • Software used: AUTOCAD
  • Client: ICADE
  • Social housing: CAPS
  • Thermal engineering consultant: ALTO
  • Engineering consultant: LGX
  • Total area: 11 100 m² SP/12 200 m² SHON
  • Cost: 16,5 M€ HT
  • Architectural Project: 2008
  • Work in two stages: July 2011 to March 2014

(more…)

Porte 12 in Paris, France by RARE architecture

Tuesday, October 7th, 2014

Article source: RARE architecture

Porte 12 designers, award wining studio RARE architecture, conceived a precise and textured design interpretation of the sleek and exacting cuisine of chef Vincent Crepel’s new restaurant. Housed in a former sewing and lingerie workshop in Paris’s new culinary district, Porte 12 is a contemporary ode to craftsmanship and the refinement of manual labor through both the design and its young chef’s cuisine. Top ten of the best restaurants in the world, the chef/artist André Chiang of Restaurant ANDRE in Singapore, is the helping force behind the “bistronomique” adventure of his longtime protégé.

Image Courtesy © RARE architecture

Image Courtesy © RARE architecture

(more…)

Pathé Foundation in Paris, France by Renzo Piano Building Workshop

Thursday, October 2nd, 2014

Article source: Renzo Piano Building Workshop

The Foundation Jerôme Seydox-Pathé is an organization dedicated to the preservation of Pathé’s heritage, and to the promotion of the cinematographic art. Its new headquarters will be located in avenue des Gobelins, on the site of a XIX century disused theater.

View of the building by night from avenue des Gobelins , Image Courtesy © Michel Denancé

View of the building by night from avenue des Gobelins , Image Courtesy © Michel Denancé

  • Architects: Renzo Piano Building Workshop
  • Project: Pathé Foundation
  • Location: Paris, France
  • Photography: Michel Denancé, Paul Raftery
  • Client: Foundation Jérôme Seydoux – Pathé
  • Design team: B. Plattner and T.Sahlmann (partner and associate in charge) with G.Bianchi (partner), A.Pachiaudi, S.Becchi, T.Kamp; S.Moreau, E.Ntourlias, O.Aubert, C.Colson, Y.Kyrkos (models)
  • Consultants:  VP Green (structure); Arnold Walz (model 3d); Sletec (cost consultant); Inex (MEP); Tribu (Sustainability); Peutz (acoustics); Cosil (Light); Leo Berellini Architecte (interiors)
  • Date: 2006-2014

(more…)

Mantois Technology Centre in Yvelines, France by Badia Berger Architectes

Saturday, September 27th, 2014

Article source: Badia Berger Architectes

The Mantois Technology Centre, located at the heart of the Mantes-Université precinct, is the first phase of the Mantes-Université development project.

Image Courtesy © TakujiShimmura

Image Courtesy © TakujiShimmura

  • Architects: Badia Berger Architectes
  • Project: Mantois Technology Centre
  • Location: Yvelines, France
  • Photography: TakujiShimmura
  • Software used: AutoCAD
  • Client: Ile-de-France region
  • Agent: SEM 92
  • Project lead: Stephane Nikolas
  • Cost:
    • Project cost: €8.374 M ex-VAT (Value as at 10/2010)
    • Cost/Sq. m€: 1,647/sq. m net surface area

(more…)

THE NEW FACADES OF THE GALERIES LAFAYETTE DEPARTMENT STORE IN METZ, FRANCE BY MANUELLE GAUTRAND ARCHITECTURE

Wednesday, September 24th, 2014

Article source: MANUELLE GAUTRAND ARCHITECTURE

Located Place de la République, the Galeries Lafayette building has undergone a real transformation, symbol of the city center’s metamorphosis in Metz and realized by architect Manuelle Gautrand.

Image Courtesy © VINCENT FILLON

Image Courtesy © VINCENT FILLON

  • Architects: MANUELLE GAUTRAND ARCHITECTURE
  • Project: THE NEW FACADES OF THE GALERIES LAFAYETTE DEPARTMENT STORE
  • Location: METZ, FRANCE
  • Photography: VINCENT FILLON
  • CLIENT: CITYNOVE FOR THE GALERIES LAFAYETTE GROU
  • DATES:
    • STUDIES: 2011 – 2013
    • CONSTRUCTION: 2013 – 2014
    • DELIVERY: JUNE 2014
    • INAUGURATION: SEPTEMBER 2014
  • MAIN CONSTRUCTORS:
    • VIRY ACML – FAYAT GROUP: STEEL & GLASS
    • EIFFAGE ENERGIE: MNE
    • FEERICK: LIGHT

(more…)

Paul Bert Léon Blum Boa Canteen in Lille-Lomme, France by D’HOUNDT+BAJART Architects & Associates

Wednesday, September 24th, 2014

Article source: D’HOUNDT+BAJART Architects & Associates

A unifying and fun building:

The urban challenge was to create a frame edge structuring this corner plot whose boundaries are based on low hosted terraced buildings, at the Marx Dormoy and Léon Blum streets. At the corner, the school restaurant’s parapet ascends gently, creating a bow that hides the restaurant’s technical equipment (centralair handlingand heat pump) while freeing the ground floor. The architectural treatment is contextual in its urban form and its materiality; the use of the brick, which dominates the landscape, has received a contemporary and qualitative review showcasing the polychrome emblematic brick bondingof the regional architecture .The layout of the masonry, with an almost random pattern, evokes the snake skin and activates the imaginary potential, architecture and young children dream-like: in a world where you have to respect the rules of the urban game, the building delivers a message of imagination, and seems, with its “snake skin” and “scale-like windows” to have the power to move.

Image Courtesy © D’HOUNDT+BAJART Architects & Associates

Image Courtesy © D’HOUNDT+BAJART Architects & Associates

  • Architects: D’HOUNDT+BAJART Architects & Associates
  • Project: Paul Bert Léon Blum Boa Canteen
  • Location: Lille-Lomme, North, France
  • Software used: Autocad and sketchup
  • CLIENT: (Associate Community of Lomme- Lille)
  • PROJECT MANAGEMENT: D’HOUNDT+BAJART Architects & Associates, Architects (Tourcoing), KHEOPS engineering, BET (Department of Technical Studies / Bureau d’Etudes Techniques) fluids and electricity (Lille), Beha Legrand, BET (Department of Technical Studies / Bureau d’Etudes Techniques)collective kitchens and hygiene (Lille), BSE ECONOMIE, Economist (Loos)
  • SURFACE AREA: 417m²
  • CALENDAR: 2012-2014
  • COST: 1M €HT
  • MISSION: Construction of a catering office for Paul Bert and Léon Blum scholar group – Marx Dormoy Street – 59160 LOMME

(more…)

Maison P(c)ap(l)ill(ss)on in Yzeure, Allier, France by Guillaume Ramillien Architecture

Tuesday, September 23rd, 2014

Article source: Guillaume Ramillien Architecture 

When Alice had come within a few yards of it, she saw that it had eyes and a nose and mouth ; {…} she saw clearly that it was HUMPTY DUMPTY himself. ‘It can’t be anybody else!’ she said to herself. ‘I’m as certain of it, as if his name were written all over his face !’

Image Courtesy © Eric Pouyet

Image Courtesy © Eric Pouyet

  • Architects: Guillaume Ramillien Architecture 
  • Project: Maison P(c)ap(l)ill(ss)
  • Location: Yzeure, Allier, France
  • Photography: Eric Pouyet
  • Software used: Autocad
  • Collaborators: Thibault Girardi, Facundo Forchino, Florian Bichet
  • Environmental engineer: Incub’ Energies Vertes du Bourbonnais
  • Area: 120 m2/ 120 sqm
  • Year: 2012-2014

(more…)

Redline (Construction of 59 housing units) in La Seyne-sur-Mer, France by Pietri Architectes

Tuesday, September 23rd, 2014

Article source: Pietri Architectes

The obsession to always be able to see the sea from where we live on the coast guides our pens from the first sketches and never fails to inspire another way of building. As such the Redline plot could not have tolerated a single, solid block, which would have obstructed the views of the surrounding housing and prevented half of the 59 housing units from having a view of the sea. Using this site survey as a starting point, and setting our sights on the north where the Bay of Toulon is curled up, a building that splits in two along a patio running from east to west was drawn.

Image Courtesy © Pietri Architectes

Image Courtesy © Pietri Architectes

  • Architects: Pietri Architectes
  • Project: Redline
  • Location: La Seyne-sur-Mer, France
  • Object : Construction de 59 logements
  • Surface : 4 300 m²

(more…)

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy