Open side-bar Menu
 ArchShowcase

Posts Tagged ‘Paris’

CLO – REFLECTION, SEQUENCE AND CONTINUITY in Paris, France by WY-TO architects

Saturday, April 27th, 2013

Article source: WY-TO architects

WY-TO’s proposal focuses on leveraging the view and natural light that enters from the north. The objective is to create a different space for each usage whilst at the same time maintaining visual continuity. To do so, storage space and bathrooms are re-organised behind a full-height technical fat wall stretching from one end of the flat to the other, from the entrance to the most
intimate part. This additional technical thickness is covered with full-height vertical aluminium structure according to a cutting-edge graphic layout. The aluminium work integrates seamlessly with the architecture of the flat, adding a vertical rhythm.

Image courtesy Cyrus Cornut

  • Architects: WY-TO architects
  • Project: CLO – REFLECTION, SEQUENCE AND CONTINUITY
  • Location: Paris, France
  • Photography: Cyrus Cornut
  • Code: CLO
  • Type: apartment
  • Status: completed
  • Timeline: 06/2009-11/2009
  • Surface: 28 m2
  • Cost estimate: 28 000 €
  • Contractor: BBF Belghali-Favrot

Cardinet Quintessence in Paris, France by Périphériques Architectes

Saturday, March 30th, 2013

Article source: Périphériques Architectes 

In order to meet the ambitious requirements in terms of comfort, of performance (low energy consumption building  – 50 kWh/m2 per year not including produced photovoltaic energy), and of economy, we have imagined a building in an innovative form, use and function.

Image Courtesy © Sergio Grazia 

Rebière 21 Housing in Paris, France by Hondelatte Laporte Architectes

Tuesday, March 26th, 2013

Article source: Hondelatte Laporte Architectes

The building is part of a major and innovative operation to improve the urban environment around Porte Pouchet bordering on Paris (17th district), the Parisian ring road, Clichy and Saint-Ouen. Nine teams of architects worked together to create 180 housing units, as part of a workshop named “Autrement Rue Rebière” and chaired by Paris Habitat and Périphériques architects. The idea of narrowing the section of Rue Rebière that runs alongside the Parisian Batignolles cemetery leads to recovery a strip of almost 600m in length and 12.60m in width.

Image Courtesy © Ronan Lacroix

  • Architects: Hondelatte Laporte Architectes
  • Project: Rebière 21 Housing
  • Location: 70/72, Rue Rebière, Paris 75017 – France
  • Photography: Ronan Lacroix
  • Project manager : Charlotte Fagart
  • Project team : Pierre Aubertin (architecte/architect)
  • Engineering: Cotec
  • Client : Paris Habitat
  • Program : 21 social housing
  • Delivery : 2012
  • Area : 1445 Sqm
  • Cost : 2 749 343 € HT
  • Construction company : Léon Grosse (general contractor)

(more…)

51 Logements à Viry-Châtillon in France by MARGOT-DUCLOT architectes associés

Friday, March 15th, 2013

Article source: MARGOT-DUCLOT architectes associés

Situation

The project finds its place in a band, potentially flooded, between the Seine and the railroad, shores and hillsides. These are occupied by “bourgeoises” mansions, theirs gardens and parks. The riversides shows a mix of  homes, modest or opulent – self-built huts, old houses, speculative operations–industrial plants or deposits expiring or abandoned.

Image Courtesy © Jean-Michel Landecy 

  • Architects: MARGOT-DUCLOT architectes associés
  • Project: 51 Logements A Viry-Châtillon
  • Location: Paris,France
  • Photography: Jean-Michel Landecy
  • Software used: Autocad and Sketchup (but mostly a pen and our own hands)

Optique Ampere in Paris, France by Cyrille Druart

Saturday, March 2nd, 2013

Article source: Cyrille Druart

In 2012, Thomas Dupré, succeeding from a long line of French opticians, decided to create his optical shop in Grenoble, France, and called on designer Cyrille Druart to come up with an original concept. “Our intent was to start with a clean slate, rethink the very idea of an optical shop that might seem too moulded and constantly more of the same. We had to figure out how to offer a new experience.

Image Courtesy Cyrille Druart 

  • Architects: Cyrille Druart
  • Project: Optique Ampere
  • Location: Paris, France
  • Software used: Designed using Autocad + Rhinoceros and rendered using Maxwell Render.

Diderot University – M6A1 Building in Paris, France by Jean-Baptiste Lacoudre Architectures

Thursday, February 28th, 2013

Article source: Jean-Baptiste Lacoudre Architectures

In an objective of sobriety and obviousness, this building of 20 meters large associates three antinomics functions, (teaching, sporting room, car park) which overlap by strata and maintain their autonomy to gather into a coherent whole.
A work on permeability and successives spaces dig the matter, filte the light and open this “monolith” on the garden and the city.

Image Courtesy Jean-Baptiste Lacoudre Architectures 

  • Architects: Jean-Baptiste Lacoudre Architectures
  • Project: Diderot University – M6A1 Building
  • Location: Paris, France
  • Program: Unity of formation and research in mathematics: 1988 students, 820 teachers-researchers, research library, amphitheater, sports complex(gymnasium and sports room), housing, basement parking.
  • THPE: 2005 (-20%)

ENSTA, ParisTech Engineering School’s in Paris, France by Jean-Baptiste Lacoudre Architectures

Thursday, February 28th, 2013

Article source: Jean-Baptiste Lacoudre Architectures

The new campus of ENSTA Paris Tech, which invested the location of Palaiseau, perfectly merges into the geometry of the structuring axes of the “Ecole Polytechnique”. In the heart of the area, it provides a new identity to the landscape..
The school, which is the main building of ENSTA ParisTech campus, lands along the boulevard surrounded by a vast redesigned space with lawns and trees. The exterior conviviality space, which is naturally blended into the rolling design of the park, provides plenty of space for social interaction.

Image Courtesy Jean-Baptiste Lacoudre Architectures 

  • Architects: Jean-Baptiste Lacoudre Architectures
  • Project: ENSTA, ParisTech engineering school’s (Ecole Nationale Supérieur des Techniques Avancées) construction on Ecole Polytech
  • Location: Paris, France

Press Conference Room in Paris, France by h2o Architectes

Saturday, February 23rd, 2013

Article source: h2o Architectes

The client’s specific request for this press conference room was to create a project that would be both contemporary and timeless at the same time in order to match the Institution that it would represent. We aimed to transform this “technical tool” into a space of representation and communication for the Minister and its politicians. A high number of technical equipments and utilities needed to be integrated in the suspended ceilling in order to a clear a clean, bright and sun filled space.

Image Courtesy © Stéphane Chalmeau 

  • Architects: h2o Architectes
  • Project: Press Conference Room
  • Location: Rue de Varenne, Paris, France
  • Photography: Stéphane Chalmeau
  • Program: Press Conference Room for the French Ministery of Agriculture in a 19th century building listed as a Historical Monument
  • Client: French Ministery of Agriculture
  • Team: h2o architectes with Engineering
    – Ingénierie Louis Choulet, HVAC
    – Cabinet Virtz, Economist
    – BMI, Structural Engineer
    – Scène, Scenography
  • Project area: 100m²
  • Delivery: December 2010
  • Software used: Rhino & AutoCAD

23 Local Authority Housing in Paris, France by Avignon-Clouet Architectes

Thursday, February 21st, 2013

Article source: Avignon-Clouet Architectes

There are two buildings situated n°42-48 “Rebière” street. It includes 23 accommodations: G+3 Duplex (7 units) and G+8 (16 units + 1 association premises of 80 m2). These two separate entities surround two other buildings designed by the agency “Atelier Provisoire” from Bordeaux. The buildings are connected through exterior walkways. The selected urban location allows to create one of the only ground floor with garden, on the whole construction project of “Rebière” street.

Image Courtesy © Stéphane Chalmeau 

  • Architects: Avignon-Clouet Architectes
  • Project: 23 Local Authority Housing
  • Location: Paris, France
  • Photography: Stéphane Chalmeau
  • Software used: AutoCAD, Rhino, 3dS Max

La Maison de la Batellerie in Paris, France by Jean-Baptiste Lacoudre Architectures

Wednesday, February 13th, 2013

Article source: Jean-Baptiste Lacoudre Architectures

THE SKIPPERS HOUSE IS PART OF A GROUP OF BUILDINGS THAT FORM AN URBAN FAÇADE ON THE SEINE. THE STRATEGIC LOCATION OF THIS “HOUSE” BETWEEN THE SEINE AND QUAI, FANTASTIC VIEWS, BUT VARIOUS CHANGES HAVE REMOVED THIS PERMEABILITY. IN ADDITION IN 1970, A HEIGHTENING OF THE ROOM AWARD WAS MADE BY A “PASTICHE” OF CORRUGATED SHEETS IMITATING CONCRETE FAÇADE. THIS ADDITION MAKES “HEAVY MASS” IN THE VOLUME GROWTH.

Image Courtesy Jean-Baptiste Lacoudre Architectures 

  • Architects: Jean-Baptiste Lacoudre Architectures
  • Project: La Maison de la Batellerie
  • Location: Paris, France
  • Status: CONSTRUCTION
  • Surface: 2500 M²
  • Client: PORT OF PARIS
  • Performance: CREF – 20%
GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley:YII2017 Register Now
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy