Power, accuracy and noise aspects in CMOS mixed-signal design

Title: Power, accuracy and noise aspects in CMOS mixed-signal design
Author: Sanduleanu, Mihai Adrian Tiberiu
ISBN: 90-3651265-4
©1999, Mihai A.T. Sanduleanu

Table of Contents

Selected Symbols and Abbreviations
 
Chapter 1   Introduction
  1.1. Motivation
  1.2. Problem definition
  1.3. Scope and outline
  References
 
Chapter 2 Power considerations in sub-micron digital CMOS
  2.1. Introduction
  2.2. Fundamental limits
  2.3. From fundamental limits to practical limits of power. An architecture level approach
  2.4. S/N ratio and power in fixed point applications
  2.5. Adders and computational power
  2.6. Ways to low-power in digital
  2.7. Example of a digital video filter
  2.8. Conclusions
  2.8. References
 
Chapter 3 Power considerations in sub-micron analog CMOS
  3.1. Introduction
  3.2. Process tuning towards digital needs. Consequences on analog
  3.3. Fundamental limits
  3.4. From fundamental limits to practical limits of power. Noise related power
  3.5. From fundamental limits to practical limits of power. Mismatch related power
  3.6. Power estimations in continuous time filters
  3.7. Conclusions
  References
 
Chapter 4 Gm-C integrators for low-power and low voltage applications. A gaussian polyphase filter for mobile transceivers in 0.35mm CMOS
  4.1. Introduction
  4.2. Large swing and high linearity transconductor
  4.3. Low voltage current Gm-C integrator with high power efficiency
  4.4. Low-power luminance video filter. Noise driven power
  4.5. Low-power, gaussian, polyphase filter for mobile transceivers. Matching driven power
  4.6. Conclusions
  References
 
Chapter 5 Chopping: a technique for noise and offset reduction
  5.1. Introduction
  5.2. Ways to reduce offset and 1/f noise
  5.3. Chopping seen as a modulation technique
  5.4. Noise modulation
  5.5. Chopped amplifiers and offset reduction
  5.6. Low-power low-voltage chopped transconductance amplifier for noise and offset reduction
  5.7. A low-power bandgap voltage reference
  5.8. Conclusions
  References
 
Chapter 6 Low-noise, low residual offset, chopped amplifiers for high-end application
  6.1. Introduction
  6.2. Low-pass filtering in a digital audio system. Application specific constraints
  6.3. The gain stage
  6.4. A low noise, low residual offset, chopped amplifier in 0.8mm CMOS
  6.5. A low noise, low residual offset, chopped amplifier in 0.5mm CMOS
  6.6. Conclusions
  References
 
Chapter 7 A 16-bit D/A interface with Sinc approximated semidigital reconstruction filter
  7.1. Introduction
  7.2. Bitstream D/A conversion system with time-discrete filtering
  7.3. S-D modulators and noise shaping
  7.4. Semidigital FIR filter principles
  7.5. Semidigital FIR filter design
  7.6. Noise properties of the D/A interface
  7.7. Realisation
  7.8. Experimental results
  7.9. Interpolative D/A converter with Sinc approximation in the time domain
  7.10. Conclusions
  References
 
Chapter 8 Conclusions
  8.1. Summary
  8.2. Conclusions
  8.3. Original contributions
  8.4. Recommendations for further research
 
Appendix 1
 
Appendix 2
 
Appendix 3
 
Rand3D

ClarkDietrich Digital tools

Featured Video
Jobs
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Product Manager for CHA Consulting, Inc. at Boston, Massachusetts
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
GIS Data Analyst for CostQuest Associates, Inc. at Cincinnati, Ohio
System Designer/Engineer for Bluewater at Southfield, Michigan
Software Developer for CHA Consulting, Inc. at Norwell, Massachusetts
Upcoming Events
AEC Next Technology Expo + Conference & SPAR 3D Expo + Conference at Anaheim Convention Center Anaheim CA - Jun 5 - 7, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
2018 AGC Joint Contractors Conference at WASHINGTON DC - Sep 30 - 3, 2018
2018 ASLA Annual Meeting and EXPO at Philadelphia - Oct 19 - 22, 2018
Bentley: -YII 2018 Awards
AIA 2018
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise