Downloads Search
Company :
Title :
URL :
*Category :
 

Search Returned 77 Result(s)
Click to Modify Description Company
38375
China Nerin Engineering
$1.1 Billion Copper Smelting Upgrade
China Nerin Engineering Co., Ltd. (Nerin), a leader among engineering companies serving China’s nonferrous metal industry, was contracted to design and deliver the $1.1 billion Tongling Copper Smelting Project within 36 months. Owned by Tongling Nonferrous Metals Group Co. Ltd., the advancedtechnology smelter is located in Tongling City, Anhui Province, China. To achieve the aggressive schedule, Nerin adopted Bentley’s 3D plant design technology including Bentley PlantSpace design applications and ProjectWise project collaboration and information management software. Bentley solutions improved design efficiency by nearly 20 percent, enabling Nerin to deliver the large-scale project three months ahead of schedule, while optimized plant configuration reduced the plant size, saving an estimated 10 percent in construction costs.
Bentley Systems
37621
Gippsland Water Factory
Sustainable Wastewater Treatment Infrastructure Ends 60-year-old Environmental Disaster The (AUD) $260 million Gippsland Water Factory was designed to provide a sustainable and economically responsible solution. AutoPLANT, Bentley’s premier plant design engineering suite, helped to keep costs down by streamlining workflows, reducing design time, facilitating procurement, and producing as-built models for lifecycle asset management. Bentley Systems
36083
Lessons learned from
The London 2012 construction programme posed significant challenges, including the management of engineering information generated by hundreds of contractors. To address this challenge, the Olympic Delivery Authority’s (ODA’s) Delivery Partner (DP) implemented an engineering content management and collaboration system, and deployed a suite of integrated design tools for use by consultants and contractors. This case study explores how the engineering technology was implemented; the problems that arose with adoption of the technology, standards and procedures; how these problems were resolved; and some of the innovations and best practices that contributed to successes in engineering information management. Bentley Systems
40764
ProjectWise Increases
With no standard data format or system for storing, accessing, and maintaining information on 52 power plants, nearly 900 grid stations, and 430,000 power lines, finding trustworthy engineering content was a time-consuming challenge for the staff at the Saudi Electricity Company (SEC). “They spent days looking for and vetting information, which hurt productivity, increased costs, and impaired our emergency preparedness, stated Abdulaziz Al-Hamed, Engineering Applications Group Leader at SEC. ”So we made it a strategic priority to manage our kingdom-wide physical assets more effectively – which required implementing a robust engineering content management system that enables access and integrity. Bentley Systems
38279
WSDOT Uses MicroStation
The Washington State Department of Transportation (WSDOT) owns, manages, and maintains a state highway system that carries 86 million vehicle miles per day. Its Visual Engineering Resource Group (VERG) produces 3D visualizations that help get buy-in on highway improvement projects through strategic communication with stakeholders and the public. For the $23.2 million State Route (SR) 20 Sharpes Corner intersection, visualizations created using MicroStation expedited the selection of the best design for reducing traffic congestion and the chance of collisions. Bentley Systems
36552
Performance Improvement
Nuclear power plants in the United States have continued to improve their performance steadily over the past decade. In 2007, according to industry data, these plants achieved a record-low production cost of 1.68 cents per kilowatt hour and a record-high level of electricity production. This is a result of many high-performing nuclear fleets that have evolved since deregulation in 1997. Nuclear electricity generation is also expected to significantly offset increased carbon dioxide emissions and long-term climate change concerns. Bentley Systems
36553
Bentley OpenPlant –
Designing even a moderately sized process plant is a complex endeavor that can involve dozens of firms and generate millions of documents. Managing the design, construction, handover, and ramp-up to minimize cost, confusion, and the time to plant profitability requires an improved way of tracking all of this information. ISO 15926 is a globally recognized standard for data integration that improves the interoperability of design applications. This leads to better visibility and control for owners and operators that result in faster project completion and more efficient plant operations. Bentley Systems
36547
eB Streamlines Document
AmerenUE’s Callaway Nuclear Plant has achieved one of the best safety and performance records of any nuclear facility since it began operating in 1984. Built at a cost of US$3 billion, the plant is approximately 100 miles west of St. Louis, Mo. It produces more than 1,200 megawatts of electricity — sufficient to power 750,000 households — using a Westinghouse four-loop pressurized water reactor and an Alstom turbine-generator. Bentley Systems
37511
Learning Legacy Study:
Techniques to overlay computer aided designs (CAD) produced by multiple designers to achieve coordination are well established in the building industry, but are less common in general civil engineering and infrastructure. An integrated CAD model was used to manage the multi-disciplinary, multi-designer London 2012 project ensuring a coordinated design was achieved. Bentley Systems
42909
Sweco’s ‘Live BIM’
Keeping the Hallandsås Tunnel Project on Track The construction of a railway tunnel through the Hallandsås ridge in southern Sweden has a long history, but the end is in sight with the start of traffic services scheduled for late 2015. To help meet the demanding project schedule and the challenges of performing tunnel excavation and detailed engineering design in parallel, Trafikverket, the Swedish Transport Administration, chose to advance its use of Building Information Modeling (BIM) practices with the help of Sweco Infrastructure AB. Sweco was given the responsibility for all BIM related strategy and coordination of the Hallandsås project including helping the project team implement effective BIM processes to optimize production, develop integrated 3D models through a collaborative design process, and use that information throughout the project lifecycle. The successful BIM implementation on this project, using Bentley(reg) ProjectWise(reg), MicroStation(reg), InRoads(reg), Bentley Rail Track, and Bentley Navigator, has resulted in innovative methods, reusable resources, a reduction in costs, and productivity improvements that help keep the project on schedule. Bentley Systems
32383
Engineering the 21st
In the second half of the 20th century, Western nations’ easy access to cheap and abundant energy, coupled with their ability to generate, transmit, and broadly distribute electricity, brought far-reaching prosperity. However, the old paradigm can’t sustain energy delivery from fossil fuels while also meeting mandates for a cleaner, safer, and more sustainable world. Bentley Systems
45361
Asset Performance Management
Over the years, Tenaga Nasional Berhad (TNB), the largest electricity utility in Malaysia, implemented a number of asset performance enhancement initiatives such as reliability centered maintenance, generation plant management, enterprise resource management, and predictive maintenance. However, vital information from these initiatives was contained in multiple databases or paper records, leading to lapses and unexpected failures. TNB launched a USD 2.8 million program to centralize condition-based information for any given asset. Bentley Systems
39804
Pacific Gas and Electric
PG&E estimates total annual savings to be USD 5.7 million across the approximately 120 substation projects completed each year The Smart Grid Tsunami Like so many utilities with aging infrastructure, Pacific Gas and Electric Company (PG&E) needed to modernize its substations and boost service reliability. “As we began a massive, multi-year smart-grid project to address these issues, we knew it would be difficult for our substation design team to keep up with the volume of design projects using our traditional, manual design process,” explained Alexander Liang, senior design engineer at PG&E. “With over 1,000 substations in our electric system, we needed to work faster and smarter – so we turned to Bentley Systems for help.” A long-term Bentley customer and one of the United States’ largest electric and gas utilities, PG&E is based in San Francisco, California, and employs over 22,000 employees. The company provides natural gas and electric service to approximately 15 million people throughout a 70,000-square-mile service area in northern and central California. Bentley Systems
39856
Nippon Steel & Sumikin
Nippon Steel & Sumikin Engineering Co., Ltd. (NSENGI), a unit of Nippon Steel & Sumitomo Metal Corp. of Tokyo, Japan, participated in the 15-company joint venture (JV) that designed and built Tokyo International Airport’s new D Runway. Located in the Bay of Tokyo, the USD 6 billion offshore runway is comprised of a 1,100-meter pier section and a 2,020-meter reclaimed section. NSENGI completed detailed design of the jacket-supported pier structure in just 18 months. This is the first application of a jacket structure for an offshore airport runway, and it could not have been designed in this timeframe without the use of Bentley’s SACS software to perform fatigue analysis of the structure under the most severe of conditions. The pier’s 100-year service life is 70-80 years longer than the standard for offshore structures. Expanding Bentley Systems
44798
John McAslan + Partners
Built in 1852, King’s Cross railway station is one of the main transportation hubs in London. As with the rest of the United Kingdom’s rail network infrastructure, the station has struggled in recent years to manage not only increasing ridership but also providing the space and amenities commuters expect. For a project of this size and complexity, architects John McAslan + Partners needed equally sophisticated models and modeling tools. MicroStation’s federated model structure allowed the large design team to easily and rapidly share common files between multiple disciplines. Using Bentley tools they were able to merge and organize numerous elements of the project including heritage and conservation work on current structures, as well as existing services and transportation infrastructure. Bentley Systems
28254
DoubleCAD XT: Works like
Professional, full-powered 2D CAD, plus view & convert a dozen popular file formats including DWG/ DWF/DXF and SKP. Like a free upgrade to AutoCAD LT.

“DoubleCAD™ XT is an AutoCAD LT work-alike. But free. Great DWG and SKP compatibility. Plus all the power of professional 2D CAD. With so many new features, you might even think DoubleCAD™ XT is an upgrade for AutoCAD LT®.”

Need an extra AutoCAD LT® seat for drafting & detailing?

DoubleCAD™ XT is an AutoCAD LT work-alike. But free.

DoubleCAD™ XT is a great companion with AutoCAD® -- and if you are a Google™ SketchUp™ user wanting to go from concept-to-construction drawings -- or have an older copy of AutoCAD LT® that can't read the latest AutoCAD® files -- DoubleCAD™ XT is an invaluable companion to SketchUp™ and AutoCAD LT®, too.

With so many new, innovative features, you might even think DoubleCAD™ XT is an upgrade for AutoCAD LT®:
  • Better drafting
  • Better detailing
  • Self-healing walls (ADT compatible)
  • Self-aligning blocks
  • Transparent fills
  • Draw order by layer
  • Bezier curves
  • Flatten 3D to 2D views
  • Hatch pattern editor
  • Advanced polyline editing
  • Automatic scaling of units between drawings
  • Parametric variable palette
  • Embed/bind image files in drawing
  • Input multiple unit types on-the-fly
  • Snap prioritization
  • Brush editor
  • Smart dimensions
  • Special line, arc, and circle tools
  • Multiline and fixed ratio ellipses tools
  • Meet-Two-Lines and Convert-to-Curve modify tools
  • Import xrefs
  • Superior workflow with Google™ SketchUp™ and SketchUp™ Pro (including new v7)
  • Open & save .DWG, .DXF, and .DWF formats from AutoCAD® R14 to 2009
... Click for more
IMSI/Design
45017
PowerCivil for Brazil
The City of Blumenau, Santa Catarina, Brazil, retained Sotepa Ltda. as consulting engineer on the 2050 Blumenau Project for Urban Infrastructure. Sotepa took 25 Percent Less Time for Design of Six-lane Connector Road Using Bentley’s Powerful Civil Software Bentley Systems
42406
GEA Process Engineering
Achieving Business Growth in Emerging Markets GEA Group, headquartered in Düsseldorf, Germany, is one of the largest system providers for food and energy processes. With EUR 5.7 billion revenue in 2012 and 24,500 employees worldwide, it operates internationally, providing businesses with world-class process technology and components for even the most demanding production processes. Bentley Systems
31630
2009 Year In Infrastructure
This 200-page yearbook highlights the extraordinary work of Bentley users improving the world’s infrastructure and the quality of life for us all. It features descriptions and color images of the more than 250 project nominations recognized, 17 winners honored in the 2009 Be Inspired Awards competition, and four recipients of Be Inspired Special Recognition Awards. In addition, it provides links to special Be Connected online seminars presented by Be Inspired Award winners and finalists. Each seminar offers insight into the design innovations and best practices employed to achieve the outstanding results that placed these projects among the top choices of the Be Inspired Awards judges. Bentley Systems
45432
Alabama Department of
The I-10 Mobile River Bridge spans the Mobile River near downtown Mobile, Alabama, with a minimum vertical clearance height of 215 feet, making it the second highest clearance bridge in the United States. The Alabama Department of Transportation (ALDOT) used Bentley’s visualization and reality modeling software, LumenRT, to deliver real-time, immersive visualizations for the crucial public involvement meetings. Bentley Systems
44030
World Interior of the
Nominees for World Interior of the Year 2014 INSIDE World Festival of Interiors
36012
DuPont Reinforces the
DuPont descibes how they achieve optimum efficiency, by going over their vision of an integrate environment. November 17th,2011 1pm-2pm EST Click the link to register! Bentley Systems
43344
Information Mobility
Upgrading Rail Transport in New South Wales The South West Rail Link (SWRL) is a New South Wales (NSW) Government initiative designed to address reliability issues and a projected increase in ridership on the metropolitan rail network in Sydney, Australia. The AUD 2.1 billion project includes a major upgrade of Glenfield Station and bus/rail interchange (Phase 1), and a new 11.4 kilometer twin-track passenger rail line from Glenfield to Leppington Bentley Systems
45391
ArcelorMittal USA World
ArcelorMittal USA formed a core team of members from 12 operating facilities who were trained by Bentley consultants in reliability principles, methodologies, and technology and then deployed as onsite team leaders to launch its World Class Equipment Reliability (WCER) initiative. To effectively implement and manage the scope of the WCER program, ArcelorMittal installed Bentley’s AssetWise Performance Management (APM) software with a custom interface to AssetPoint’s Tabware computerized maintenance management system. Bentley Systems
45417
HDR Tappan Zee Hudson
HDR was awarded the contract to design and build the new New York Bridge – which will replace the traffic-jammed Tappan Zee Bridge – on an aggressive schedule. In addition to crossing the Hudson River at one of its widest points, the design included twin tower cable-stayed main spans with 1,200-foot center spans, four traffic lanes, shoulders and emergency lanes, electronic tolling facilities, a shared-use path, and space for future mass transit. The owners also required an as-designed model and a complete, as-constructed database of assets derived from and tied to a 3D model Bentley Systems
43705
ArcelorMittal Burns Harbor
The ArcelorMittal USA Flat Roll Operations is comprised of 12 operating facilities employing over 17,000 people. The World Class Equipment Reliability (WCER) team at the ArcelorMittal Burns Harbor hot strip mill has achieved very dramatic results in a one-year period. Total savings in the first year were USD 2,076,900. Other positive benefits Bentley Systems
24487
AutoDWG DWG to Image
AutoDWG DWG to Image Converter featured with batch converting, easy to use wizard, converting many DWG and DXF files to JPG (JPEG), TIF (TIFF), GIF, PNG, BMP in one go. AutoCAD not required.Pro version Supports command line. SHX,Xref and Line Width supported; You may set the Image Size, Output Color (True Colors,Gray and Black-White), Background Color; You may convert model space, all layouts, all paperspace, or last active layout to Image file; You can adjust the size of output pages with its layout automatically; Version 3.3 supports AutoCAD R2.5 to R2009 drawings. Autodwg
43018
RM Bridge Enables Armando
Rebuilding Post-war Infrastructure In the aftermath of a devastating civil war, the Republic of Angola faced the daunting task of rebuilding its infrastructure. As part of this effort, Armando Rito Engenharia SA Lisbon, Portugal, was retained by the Road Institute of Angola on behalf of the Ministry of Public Works to design the 4th of April Bridge over the Catumbela River. The EUR 26 million cable-stayed bridge replaced an antiquated one-way bridge, which turned a two-hour-or-more journey between the cities of Benguela and Lobito into a 30-minute drive. Bentley Systems
25824
SolidStructural
SolidStructural is designed as a convenient tool for Steel Detailing, Structural Design and Fabrication. In the family of 3D Steel integrated packages (such as SDS/2 or Tekla Xsteel) SolidStructural is the lowest price software, affordable for small companies or individuals. At the same time often the productivity and representation of drawings produced by SolidStructural is better. SolidStructural short learning curve and friendly interface lets new users become productive in a very short term. The users of this program generate precise 3D model and produce automatically the variety of structural and miscellaneous steel drawings: anchor bolt plans and details, erection plans, plan and elevation views, Shop Drawings of piece details and stair plans and elevations. Reports in SolidStructural (Cutting List, Steel Summary, plates, angles, Steel Order and others) are always up to date. SolidStructural is distributed with Acad Officer - effective set of AutoCAD add-ons. System Requirements: AutoCAD 2000 or higher + MS Access 2000 or higher. 1 to 1 of 1 NYacad, Inc.
44799
Building Studio
Based in Sydney, Australia, Building Studio uses Bentley software to design and deliver complex buildings for corporate, institutional, and government clients. The company is well known for producing creative, rigorously tested solutions that meet each client’s unique needs and aspirations. To date, the company’s 20 employees have used AECOsim Building Designer – and, more recently, ProjectWise – to design, document, and build more than 90,000 square meters of buildings. Bentley Systems
45125
iSAT Network Engineers
Accelerating Projects with Intelligent Design iSAT Network Engineers is a fast-growing engineering/ procurement/construction company that provides turnkey solutions for utility transmission and distribution as well as high-power testing labs. Power Transmission Corporation of Uttarakhand retained iSAT to develop a 132-kilovolt substation with a total capacity of 80 million volt-amperes in the capital city of Dehradun, Uttarakhand, India. iSAT employed a new approach for the INR 114.4 million project that unified physical, electrical, and structural substation design with Bentley’s integrated applications. The Bentley substation solution enabled the use of intelligent models that increased cross-discipline collaboration, reduced revisions by 60 percent, improved the quality of cost estimates, and accelerated the overall design process by 40 percent. Bentley Systems
25449
Daylight Simulation in
This white paper walks the reader through the various principles and workflows for carrying out an accurate daylight analysis in Autodesk® 3ds Max® Design 2009 software with the Exposure™ technology feature. The reader will learn some of the basic principles of daylight simulation and lighting analysis as well as how to build a scene, pick adequate material properties, and set up the render settings for a physically accurate simulation. Autodesk
44214
STAAD.Pro Saves USD 400,000
Applying Proven Technology Hamon Thermal (Tianjin) Co., Ltd. is part of the Hamon Group, an international engineering and contracting company that is a leader in the specialized markets for cooling systems, process heat exchangers, air quality systems, chimneys, and heat recovery steam generators and waste heat boilers. Xinjiang Jinhui Zhaofeng Energy Co. Ltd. retained Hamon to design the CNY 45 million steel structure for the air-cooling island at the CNY 3 billion Xinjiang Jinhui Power Plant located in the Baicheng Heavy Chemical Industrial Park in Baicheng County, Xinjiang, China. The air-cooling island will cool off steam produced by the turbines in 2x300 megawatt generator sets. Modeling the design of the steel structure took about 25 percent less time using STAAD.Pro®, Bentley's 3D structural analysis and design engineering software. STAAD.Pro enabled Hamon to optimize the design and decrease steel consumption from 3,500 tons to 3,100 tons. This represented a savings of CNY 2.5 million. Bentley Systems
45396
Suncor Energy (Edmonton
Suncor Energy (Suncor) designed and implemented a CAN$ 12 million Information Plant (IP) at its Edmonton refinery that integrated the facility’s technical data, engineering resource planning information, and documents into one reliable system, improving and supporting daily operations, maintenance, projects, and business decisions. Bentley Systems
44211
Structural Modeler Coordinates
Observation Wheel Anchors The LINQ The 168-meter-tall observation wheel aptly named “High Roller” is the focal point of The LINQ, a new quarter-mile open-air shopping, dining, and entertainment district on the Las Vegas, Nevada, Strip. Featuring 28 spherical cabins supported by a circular wheel rim, the ride creates an immersive audio, video, and lighting experience while providing dizzying views of the city for up to 1,120 people each turn. Arup served as engineer of record as part of the project team commissioned by Caesars Entertainment Corporation to develop the USD 550 million district. The firm performed structural, geotechnical, mechanical, and electrical engineering, as well as acoustics and fire safety consulting for the observation wheel, which sits opposite Caesars Palace. As the primary building information modeling (BIM) software used by the team, Bentley's Structural Modeler enabled the seamless integration with other applications that was instrumental in 3D coordination and delivery of the project. Bentley Systems
44800
Arcelor Mittal Burns Harbor
The ArcelorMittal USA Flat Roll Operations is comprised of 12 operating facilities employing over 17,000 people. The World Class Equipment Reliability (WCER) team at the ArcelorMittal Burns Harbor hot strip mill has achieved very dramatic results in a one-year period. Total savings in the first year were USD 2,076,900. Other positive benefits include increased safety and a cleaner work environment. Bentley Systems
44212
Fitzpatrick Engineering
Owner Requirements Drive the Need for Interoperability Located in North Carolina, U.S.A., Fitzpatrick Engineering Group (FEG) specializes in structural engineering solutions for commercial, institutional, and healthcare buildings. The firm was selected by a major healthcare provider in the southeastern United States to be part of an integrated project delivery team for an USD 18 million rehabilitation center. As a long-time Bentley user and an early adopter and advocate of building information modeling (BIM), FEG was committed to using their preferred BIM applications – Bentley's AECOsim Building Designer® and RAM Structural System® – to provide structural design for the 65,000-square-foot, steel-framed building. Using Bentley's integrated and interoperable software enabled FEG to not only easily meet the owner's requirements for a Revit deliverable, and provide the steel fabricator with the most accurate and complete information possible, but also to achieve a USD 28,000 savings in direct material costs and field inspection costs. Bentley Systems
23700
Autodesk FBX-Based Revit
This white paper is for architects, designers, engineers, and visualization specialists who need to move data from Revit Architecture 2009 software to Autodesk 3ds Max Design 2009 software to further explore, validate, or communicate their designs. Autodesk
42908
Bristol Water Improves
Bristol Water, the water supply company responsible for providing water to 1.2 million consumers in and around the Bristol area, needed a way to help it monitor its performance and meet increasing challenges presented by the United Kingdom's Traffic Management Act. With Bentley's help, Bristol developed an Exor Information Manager-based solution that provides high-level aggregate executive information, monthly performance reports, and manages noticing and street works activities. This enabled a significant reduction in the administrative burden of reporting, a reduction in street works fines, provided greater visibility of performance, and allowed them to easily meet legislation requirements. Bentley Systems
44213
WaterCAD Helps Sabesp
Power Outages and Safety Issues Hinder Water Supply Sabesp MA is a mixed-capital company that provides water and sewage services to the 364 municipalities in the state of São Paulo, Brazil. It is considered one of the largest water and sewage service providers in the world, supplying potable water to 27.7 million people. Two pump stations, Vila Bela and Jardim da Conquista, pump water from the Rio Claro aqueduct, each through an 800 millimeter pipe. The Vila Bela pump station supplied the Jardim da Conquista tank with an average flow of 708 liters per second, and the Jardim da Conquista pump station supplied the Jardim São Pedro tank with an average flow of 388 liters per second. This Jardim da Conquista pump station suffered electrical shutdowns due to failures in the supply of the power utility. Each time this occurred, staff had to be onsite to restart the pumps and electrical panels of the pump station. Bentley Systems
25396
Intergraph 2008 Pictures
Intergraph 2008 Pictures taken by AECCafe.com IBSystems, Inc.
43273
Free UPP a revolutionary
Highly professional Architectural BIM design and Bills of Quantities software to use for free? Free UPP is here. A new way to distribute professional software for the Engineering and Architectural industries. Free UPP (Free Use Pay Print) is born: a revolutionary way to distribute professional Architectural, Engineering and Bill of Quantities/Estimating software. With Free UPP software, use, program updates, training and support are completely free. The customer pays only when needing to print (a very convenient cost for each A4 sheet), and with no expiry date. The first 500 prints are free. http://www.accasoftware.com/en/id6/free-upp.html The customer has a free license to use the full-featured version of the software for architectural BIM design and Bills of Quantities/Estimating. Programs with very advanced 2D/3D design features to produce floor plans, cross sections, elevation views, isometric views, perspective views, renderings, photo match simulations, bills of quantities, etc... Free UPP software solutions are complete and professional and can easily be compared to other software such as Revit, All Plan, ArchiCAD or VectorWorks. With Free UPP software you can collaborate with anyone, because everyone can use the same software for free. You can also install the software on as many computers as you like free of charge. http://www.accasoftware.com/en/id7/download.html Free UPP is proposed by ACCA software, a company with over 200,000 program users and is one of the most important international manufacturers in the industry. Free UPP is a new way of thinking of professional software for the Engineering and Architectural industries combining convenience, simplicity and professionalism in a revolutionary way. http://www.accasoftware.com/en/ ACCA Software
45393
RCM2 at Siberian Generation
In 2010, Siberian Generation Company worked with Aladon Network member Bellwood Systems Ltd. to pilot a plant reliability program at two plant sites. The project required that Bellwood analyze asset functions and failure modes, and rank these failure modes based on risk to devise an optimized maintenance plan for each asset. To manage and support the program, Bellwood relied on Bentley’s asset performance management software and Aladon Network’s reliability-centered maintenance (RCM2) methodology Bentley Systems
19580
AutoDWG DXF Viewer Pro
A lite and fast dwg viewer, browse , view, markup and print DWG, DXF files. Supports AutoCAD 2007 drawing format. AutoDWG DXF Viewer Pro version supports DWG to JPG,DWG to TIFF,DWG to GIF,DWG to PDF conversion GRAPHISOFT
43706
ScottishPower Strategy
Energy company ScottishPower, a division of Iberdrola, was the first power generator and the second company in the world to be certified on BSI Publicly Available Specification 55 (PAS 55:2008), which benchmarks best practices, in asset management. AssetWise Performance Management and the Bentley Asset Performance Management (APM) Methodology, coupled with the Amor Group Process Safety Methodology and KPI Dashboard, played a key role in ScottishPower’s achievement. Bentley Systems
24274
How Autodesk is Addressing
To meet the specific needs of the higher education environment Autodesk, Inc. has included new features and reports for A21 Grant Tracking and Expanded Space Classification & Condition Assessment in their 2009 release of FMDesktop. This white paper outlines the new features added. Simple Solutions FM
33584
F5 Tablet PCs Eliminate
Sundt chose the Motion F5 Tablet PC, with the Intel® Core™2 Duo processor for improved performance and battery life. The handle, light-weight rugged design, integrated features and size made it the perfect alternative to their traditional laptops. Motion Computing
26224
University of Missouri
University of Missouri - Columbia (MU) is situated in a college town of about 70,000, with a student population of approximately 24,000. The Campus Facilities Space Planning and Management office, under the leadership of Scott Shader, is responsible for Space Planning activities that occur in over 200 buildings on the main MU campus and an additional 900-plus buildings across the state. These include four hospital campuses and fifteen agricultural experiment stations. This real estate comprises a very impressive 15 million gross square feet, all of which is managed by the campus using ARCHIBUS. ARCHIBUS, Inc.
37405
Cross Section Analysis
Cross Section Analysis & Design performs all calculation tasks for generic cross sections of any material. Moreover, the program can perform reinforcement design as per AASHTO, UBC, AS 3600, IS 456, ACI 318, BS 8110, CSA A233, EC2, NZS 3101 and CP65. Engineering Software Solutions
45630
HDR Los Osos Wastewater
EADOC enabled the project team to effectively and efficiently communicate with the public through the GIS interface. - See more at: https://www.bentley.com/en/project-profiles/hdr_los_osos#sthash.rj2NncPE.dpuf Bentley Systems
33405
Design Sharing in BIM
Next to a great many benefits, Building Information Modeling (BIM) has also introduced new challenges for the design team. BIM models contain significantly more data and with much tighter integration than traditional 2D CAD drawings. As a result access by teams to projects now contain bottlenecks not known in earlier CAD design methods. Traditional work sharing, by assigning standalone CAD files to individual team members, does not work in case of model-based design since the entire project is incorporated within the BIM model therefore BIM projects require a completely new method of work sharing. To facilitate teamworking in BIM projects software vendors developed file-based model sharing solutions. Team members worked on copies of the BIM project and synchronization of the work of the team was achieved through merging the different versions of the project files. With BIM becoming mainstream and with the recent focus on accelerating construction project completion the clunky, file-based workflow quickly has become “the bottleneck” to timely project delivery. This whitepaper aims to analyze the different solutions provided to the above-described problem and offer recommendations about the most important criteria one should be aware of when selecting an optimal design sharing solution for BIM implementation. GRAPHISOFT
33588
Doster Construction Deploys
Ranked within the Top 25 Multifamily Builders of 2008 by Builder magazine, Doster Multifamily is widely regarded as a national leader in wood-frame construction. The way that they do business and the final structures that they produce have given them a reputation of excellence in this highly specialized field of construction. Motion Computing
35464
progeCAD Professional
AutoCAD LT compatible, high quality CAD software for technical CAD drawing - building architectural civil and industrial engineering design. Print PDF from CAD, free architectural tools, 20000 symbols + ACIS 3D modeling. CADDIT CAD Software
23722
BE Conference 2008 Pictures
Pictures taken by AECCafe.com at BE Conference 2008 IBSystems, Inc.
23961
The Legalities of Imaging
The legal acceptability of properly authenticated paper documents is well established and accepted throughout various industries. However, the advent of scanning, networks and electronic documents has spawned debate regarding the legality of electronic documents. The statute, Act UPA 28USC p1732, already cites admissibility of electronic (copied) documents and is often used as the governing statute. Open Archive Systems
24439
AutoDWG DWG to Image Converter
AutoDWG DWG to Image Converter featured with batch converting, easy to use wizard, converting many DWG and DXF files to JPG (JPEG), TIF (TIFF), GIF, PNG, BMP in one go. AutoCAD not required. SHX,Xref and Line Width supported; You may set the Image Size, Output Color (True Colors,Gray and Black-White), Background Color; You may convert model space, all layouts, all paperspace, or last active layout to Image file; You can adjust the size of output pages with its layout automatically; Version 3.3 supports AutoCAD R2.5 to R2009 drawings. Autodwg
29440
Three Critical Challenges
To create jobs and upgrade the nation’s infrastructure, the American Recovery and Reinvestment Act of 2009 (ARRA) allocates $130 billion to construction projects. Government agencies and project managers are under considerable pressure to deliver ARRA projects with maximum efficiency and minimal waste. This white paper outlines three critical challenges to any stimulus package construction project, and shows how using an online collaboration platform can help overcome these challenges and deliver successful projects. aconex
33620
progeCAD Standard IntelliCAD
IntelliCAD offers robust AutoCAD compatibility at minimal cost. Edit view print and convert Autodesk AutoCAD DWG files from most any version of AutoCAD. Similar icons, commands and interface. Supports XP Vista Windows 7 - Edit 2010 AutoCAD DWG files CADDIT CAD Software
45431
Alabama Department of
The I-10 Mobile River Bridge spans the Mobile River near downtown Mobile, Alabama, with a minimum vertical clearance height of 215 feet, making it the second highest clearance bridge in the United States. The Alabama Department of Transportation (ALDOT) used Bentley’s visualization and reality modeling software, LumenRT, to deliver real-time, immersive visualizations for the crucial public involvement meetings. Bentley Systems
45629
Finley Engineering US
The interoperability of Bentley software allowed FINLEY & WALSH to integrate bridge segment drawings and conduct a time-dependent, staged analysis to meet the demanding project schedule, resulting in a project savings of USD 2 million. - See more at: https://www.bentley.com/en/project-profiles/finley-engineering_us-281-bridge#sthash.HRThR9uL.dpuf Bentley Systems
33170
Ashampoo 3D CAD Architecture 3
Design family homes, shopping malls, high-rise buildings or just an apartment within a real 2D/3D environment using all the available tools for planning and visualizing buildings. With its simple usability, exact results and yet reasonable price tag the software clearly stands out of the crowd. Ashampoo 3D CAD Architecture 2 offers a variety of brand-new features as well as improvements in usability and workflow management. Some of these changes have been brought about through user suggestions and contributions. Use for example the surface design tool to design your own surfaces, wrap objects into smooth shadows for even more authentic interiors, choose from a variety of different solar elements, or go on a virtual tour to fully explore your CAD projects. On top of everything, Ashampoo 3D CAD Architecture 2 now comes with the Quantities Plug-in. With this plug-in you can easily keep track of complex projects and develop your personal planning strategy. New Features: - Quantities Plug-in enabling for a deep analysis of the whole planning process - Surface design tool that lets you design your own surfaces - Enhanced building planning process for whole buildings or single stories - Smooth shadows for even more authentic interiors - Extended 2D functionality - Data input assistance during planning and construction phase - Solar elements with own catalogue - Virtual tour enables you to fully explore your CAD projects - New 3D objects for kitchen areas, bathroom areas and other areas of the house - General program improvements like support for imperial system of measurements, Pan in 2D view and many more! ashampoo GmbH & Co. KG
39126
PrintForm
Printform 2013 is a software that enables you to process and manage more than 2100 building processing forms. Plenty integrated functions such as automated adoption of core data help you to accelerate your work processes and to get more efficient. Vordruckverlag Weise GmbH
24440
AutoDWG DWG to Image
AutoDWG DWG to Image Converter featured with batch converting, easy to use wizard, converting many DWG and DXF files to JPG (JPEG), TIF (TIFF), GIF, PNG, BMP in one go. AutoCAD not required.Pro version Supports command line. SHX,Xref and Line Width supported; You may set the Image Size, Output Color (True Colors,Gray and Black-White), Background Color; You may convert model space, all layouts, all paperspace, or last active layout to Image file; You can adjust the size of output pages with its layout automatically; Version 3.3 supports AutoCAD R2.5 to R2009 drawings. Autodwg
24486
AutoDWG DWG to Image Converter
AutoDWG DWG to Image Converter featured with batch converting, easy to use wizard, converting many DWG and DXF files to JPG (JPEG), TIF (TIFF), GIF, PNG, BMP in one go. AutoCAD not required. SHX,Xref and Line Width supported; You may set the Image Size, Output Color (True Colors,Gray and Black-White), Background Color; You may convert model space, all layouts, all paperspace, or last active layout to Image file; You can adjust the size of output pages with its layout automatically; Version 3.3 supports AutoCAD R2.5 to R2009 drawings. Autodwg
42427
Free UPP
Highly professional Architectural BIM design and Bills of Quantities software to use for free? Free UPP is here. A new way to distribute professional software for the Engineering and Architectural industries. Free UPP (Free Use Pay Print) is born: a revolutionary way to distribute professional Architectural, Engineering and Bill of Quantities/Estimating software. With Free UPP software, use, program updates, training and support are completely free. The customer pays only when needing to print (a very convenient cost for each A4 sheet), and with no expiry date. The first 500 prints are free. The customer has a free license to use the full-featured version of the software for architectural BIM design and Bills of Quantities/Estimating. Programs with very advanced 2D/3D design features to produce floor plans, cross sections, elevation views, isometric views, perspective views, renderings, photo match simulations, bills of quantities, etc... Free UPP software solutions are complete and professional and can easily be compared to other software such as Revit, All Plan, ArchiCAD or VectorWorks. With Free UPP software you can collaborate with anyone, because everyone can use the same software for free. You can also install the software on as many computers as you like free of charge. Free UPP is proposed by ACCA software, a company with over 200,000 program users and is one of the most important international manufacturers in the industry. Free UPP is a new way of thinking of professional software for the Engineering and Architectural industries combining convenience, simplicity and professionalism in a revolutionary way. ACCA Software
44189
Ashampoo 3D CAD Architecture 5
Ashampoo 3D CAD Architecture brings computer-aided planning and design of indoor and outdoor projects to your PC. The built-in project assistant guides your through the basic setup process and even inexperienced users will feel right at home with the thematically-structured user interface. The program offers all common tools for blueprint creation with extensive 2D and 3D views. Rooms can be individually furnished using the integrated object catalogue. It offers a myriad of objects from doors, windows, balconies and car ports to sanitary and electrical appliances. Finished buildings are instantly explorable through virtual tours. The integrated light and shadow simulation gives an even more realistic picture and also takes modern photovoltaic elements into account. If you're planning on building your own house or redecorating your garden, Ashampoo 3D CAD Architecture 5 is the ideal tool for you. ashampoo GmbH & Co. KG
32374
Engineering the 21st
A Bentley White Paper Engineering the 21st Century Utility: A Changing Industry The first in a series of white papers addressing the challenges of the 21st century utility Bentley Systems
36454
progeCAD Standard IntelliCAD
IntelliCAD edits AutoCAD DWG files at minimal cost. Edit view print and convert Autodesk AutoCAD DWG files from most any version of AutoCAD. Similar icons, commands and interface. Supports XP Vista Windows 7 - Edit 2010 AutoCAD DWG files CADDIT CAD Software
39122
Bautagebuch
Bautagebuch 2013 is a program to create and manage construction logs. You are able to create plenty construction project logs. Each of them is able to contain plenty of reports (for every day for instance). Vordruckverlag Weise GmbH
40140
Nippon Steel & Sumikin
A First in Offshore Airport Infrastructure Nippon Steel & Sumikin Engineering Co., Ltd. (NSENGI), a unit of Nippon Steel & Sumitomo Metal Corp. of Tokyo, Japan, participated in the 15-company joint venture (JV) that designed and built Tokyo International Airport’s new D Runway. Located in the Bay of Tokyo, the USD 6 billion offshore runway is comprised of a 1,100-meter pier section and a 2,020-meter reclaimed section. NSENGI completed detailed design of the jacket-supported pier structure in just 18 months. This is the first application of a jacket structure for an offshore airport runway, and it could not have been designed in this timeframe without the use of Bentley’s SACS software to perform fatigue analysis of the structure under the most severe of conditions. The pier’s 100-year service life is 70-80 years longer than the standard for offshore structures. Bentley Systems
32934
Punch! Shark FX v7 - Windows
Bring your idea to market faster with Shark™ FX v7, the new standard with precision 3D digital prototyping. Explore new product concepts with unprecedented ease and precisely share data with manufacturing processes. Packing more than 140 new features into this premier precision modeling application, Shark™ FX v7 runs on both the Windows and MAC platform. New features include The Gripper™, an intuitive interface to move, rotate, and scale objects in 3D. Users easily access pen, text, and dimension attributes via the Inspector and can create user defined tool sets with the Custom Pallette. New 3D modeling and photo-rendering capabilities include Edge Treatments for creating ribs and lips, 17 new Sketch rendering options, and HDRI support for outputting images. In its role as a prototyping tool, users appreciate the wide compatibility with other tools and new v7 continues to deliver with support for CATIA V5, Inventor 2010, VDA-FS, updated AutoCAD 2010, SketchUp V7, and Pro/E. Encore Software, Inc.
32935
Punch! Shark FX v7 - MAC
Bring your idea to market faster with Shark™ FX v7, the new standard with precision 3D digital prototyping. Explore new product concepts with unprecedented ease and precisely share data with manufacturing processes. Packing more than 140 new features into this premier precision modeling application, Shark™ FX v7 runs on both the Windows and MAC platform. New features include The Gripper™, an intuitive interface to move, rotate, and scale objects in 3D. Users easily access pen, text, and dimension attributes via the Inspector and can create user defined tool sets with the Custom Pallette. New 3D modeling and photo-rendering capabilities include Edge Treatments for creating ribs and lips, 17 new Sketch rendering options, and HDRI support for outputting images. In its role as a prototyping tool, users appreciate the wide compatibility with other tools and new v7 continues to deliver with support for CATIA V5, Inventor 2010, VDA-FS, updated AutoCAD 2010, SketchUp V7, and Pro/E. Encore Software, Inc.
35123
STA Tech Fair
The STA held its fi rst ever Technology Fair at the Terrace on the park on April 22. An excitement was in the air as the vendors busily set up their booths anticipating business opportunities from the attendees coming to the event. C/F Data Systems, LLC
37617
Outstanding Customer
Guangzhou, China: May 23, 2012 – ZWSOFT, a leading supplier of 2D & 3D CAD/CAM solution to the AEC and MCAD industries, announced it has entered into a global agreement with Zamil Industrial to adopt ZWCAD across the company for its construction and manufacturing departments in Saudi Arabia headquarters, and branches in India and Vietnam. Zamil favors ZWCAD because of the outstanding product performance and customer support. Zamil Industrial is a leading manufacturing and fabrication group that provides products, engineering systems and services for the construction industry. It was established in 1998 in Dammam, Saudi Arabia andsells its products in more than 90 countries with manufacturing facilities in Saudi Arabia, United Arab Emirates, Egypt, India, Vietnam and Italy. As Zamil was deciding on a CAD software for their company, their main concerns were price, support, compatibility and having a friendly user interface. Orbit, the authorized ZWCAD reseller in Saudi Arabia held many testing meetings and workshops for Zamil, to show how ZWCAD 2012 could meet their demands. Due to Orbits strong desire to provide great support and the powerful features and functions of ZWCAD, Zamil not only decided to integrate the software in Saudi Arabia, but in their branches around the world as well. Zamil is continuing to purchase additional seats of ZWCAD given that they are unifying the solution in all units and sub branches and receiving positive end user feedback along with continuous improvements in the software. Truman Du, CEO of ZWSOFT commented, “Zamil and Orbit are a great example of the partner relationship that we promote here at ZWSOFT. Outstanding product performance and support are the core values that we have been continuously delivering to our customers. I am happy to say that customers who purchase ZWCAD are often pleasantly surprised at the high level of support from ZWCAD’s partners and resellers around the world.” About Orbit Orbit Middle East, the authorized reseller of ZWCAD in Saudi Arabia, is a leading provider of best-of-breed solutions for businesses across the spectrum of the real estate and Architectural / Engineering / Construction (AEC) industries. It competes against time, past performance and rivals to efficiently deliver high quality solutions for project management, scheduling, estimating, construction accounting, property management, quantity takeoff, and CAD. http://www.cadsaudi.com/ About ZWSOFT ZWSOFT’s a world-renowned CAD/CAM solutions provider for the AEC and MCAD industries, with over 180,000 clients in more than 80 countries. ZWSOFT's products, ZWCAD and ZW3D, have satisfied the needs of 2D&3D designers for over a decade. http://www.zwsoft.com Contact Info John Chow ZWSOFT zhouzehong@zwsoft.com 86-20-38289780 Ext 858 www.zwsoft.com ZWCAD SOFTWARE CO., LTD.
39129
VvW Control
VVW Control 2013 CS provides you with processing, controlling and documenting projects and with fee accounting on basis of HOAI. This software is a planning office-based office and management software application certified to PeP-7 standard. Vordruckverlag Weise GmbH
44154
Mainmedia Video Processing
Video Processing Filter is a powerful transform filter that allows rotate the video in 90, 180, and 270 degrees ,keep aspect ratio when rotated the video in 90 and 270 degrees , flip the video, convert a RGB video stream to Grayscale and invert color Mainmedia Software
45229
GeoTools For AutoCAD
GeoTools for AutoCAD offers over 200+ productivity tools for various geographic data related processing. Advanced polyline annotation, drawing cleanup, Civil, Geographic and Mining Tools for various purposes. Four Dimension Technologies, Bangalore, INDIA

GRAPHISOFT: ARCHICAD download 30-day FREE trial
Graphisoft ARCHICAD  Download a 30-Day FREE trial
TurboCAD pro : Start at $299
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy