TREK, INC. Introduces New High-Speed High-Voltage Power Amplifier

Model 10/40A-HS to be featured at IEEE Plasma Conference for use in Electrostatic Deflection, Material Characterization, Plasma, and Surface Modification Applications

MEDINA, N.Y., May 28, 2013 — (PRNewswire) —   TREK, INC., a designer and manufacturer of high-voltage power amplifiers and high-performance electrostatic instrumentation, will introduce a new high-speed, high-voltage amplifier – Model 10/40A-HS – at the IEEE Pulsed Power & Plasma Science Conference ( PPPS 2013) being held June 17 – 19 in San Francisco, CA. Visit Trek at booth #305.   

This new +/-10 kV four-quadrant DC-stable amplifier provides high speed of response with slew rate greater than 900 V/us, high output current to +/-120 mA peak AC, and large signal bandwidth of DC to greater than 23 kHz (-3dB).

Applications include electrostatic deflection (ion beam steering, mass spectrometers, particle accelerators), material characterization (ferroelectrics), plasma (atmospheric plasma, dielectric barrier discharge) and surface modification (for enhanced adhesion, biocompatibility, performance).  

Additional applications include AC or DC biasing, delta tan testing, dielectrics testing, electroactive polymers (EAP), electrocoalescence, electrophoresis, electrorheological fluids, electro-optic modulation, electrospinning, fusion research, high power semiconductor testing, insulation breakdown testing, material poling and quadra-pole ion trap.

This new amplifier will enable technological advancement in many industries including aerospace, automotive, biotechnology, defense, electronics, energy, instrumentation, laboratory, military, power, semiconductors, and telecommunications.

Model 10/40A-HS features an all-solid-state design to deliver high slew rate, wide bandwidth and low-noise operation. This amplifier provides precise control of output voltages in the range of 0 to +/-10 kV DC or peak AC with an output current range of 0 to +/-40 mA DC or +/-120 mA peak AC for 1 ms. It is configured as a non-inverting amplifier with a fixed gain of 1000 V/V.

The four-quadrant, active output stage sinks or sources current into reactive or resistive loads throughout the output voltage range. This is essential for achieving the accurate output response and high slew rates demanded by reactive loads. Model 10/40A-HS is protected against over-voltage and over-current conditions that may be generated by active loads or by output short circuits to ground.

Precision voltage and current monitors provide low-voltage representations of the high-voltage output and load current for monitoring purposes or for use as feedback signals in a closed loop system.

The remote high-voltage on/off feature provides a connection for a remote device to turn on/off the high-voltage output, making Model 10/40A-HS suitable for automated or computer-controlled systems. It is CE compliant.

Product information: www.trekinc.com/products/10-40AHS.asp  

Specification sheet:  www.trekinc.com/pdf/10-40A-HSSales.pdf

For additional information: email Email Contact or call USA +1-585-798-3140

IEEE Pulsed Power & Plasma Science Conference (PPPS2013):   www.ece.unm.edu/ppps2013/

TREK, INC. ( www.trekinc.com) designs, manufactures and sells high-voltage amplifiers, power supplies & generators and high performance electrostatic measurement instruments, sensors & monitors to the global marketplace. Trek's standard and custom products are used: (1) by OEMs involved in semiconductor manufacturing, electrophotography, photovoltaic/solar and many other industries; (2) in applications sensitive to electrostatic discharge (ESD); and (3) by companies/universities involved in a variety of research applications.

 

SOURCE TREK, INC.

Contact:
TREK, INC.
Brian Carmer
Email Contact Office: +1-585-798-3140 ext 285, Mobile: +1-585-590-0733
Web: http://www.trekinc.com/




Review Article Be the first to review this article
Rand3D

Featured Video
Jobs
ENVIRONMENTAL GRAPHIC DESIGNER for Blitz at San Francisco, CA
Structural Engineer for The Planate Management Group LLC at Perry Point, MD
Structural Engineer for Albert Kahn and Associates at Detroit, MI
Senior Mechanical Engineer for Albert Kahn and Associates at Detroit, MI
Mechanical Engineer for The Planate Management Group LLC at Perry Point, MD
Upcoming Events
The Buildings Show 2017 at 20 Eglinton St. W Suite 1200 Toronto Ontario Canada - Nov 29 - 1, 2017
International LiDAR Mapping Forum at Hyatt Regency 650 15th Street, Denver CO - Feb 5 - 7, 2018
2018 AGC Equipment, Technology & Construction Solutions Expo at New Orleans Louisiana - Feb 26 - 28, 2018
IDE International Drone EXPO & Business Conf at Los Angeles Convention Center Los Angeles California - Mar 9 - 10, 2018
GRAPHISOFT: ARCHICAD download 30-day FREE trial
Canon: CW910
Bentley:YII2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise