HOUSTON, TX -- (Marketwired) -- Jul 02, 2013 -- Intergraph has announced eight half-day CADWorx workshops, with four in Houston, Texas and four in Denver, Colorado on July 16-17, 2013, all hosted by ECE Design. Three of the Houston workshops will be on CADWorx fieldPipe Professional, Intergraph's powerful tool for creating as-built models and spool verifications using a point cloud model from a Leica laser scanner. The tool greatly reduces as-built modeling time and improves accuracy. The fourth Houston workshop will be on CADWorx isometric drawing automation using ISOGEN. Two of the workshops in Denver will focus on pipe modeling and show how CADWorx 2013 enhancements can increase productivity by over 50%. The other two will demonstrate how to use catalogs to quickly prepare piping specifications for production work. Each person will leave with a production-ready project file containing piping specifications for ASME Raised Face and Ring Joint 150, 300, 600, and 900 pressure classes.
The Houston workshops are at the ECE Houston Training Center, 7102 West Sam Houston Parkway North. The Denver workshops are at the Marriott Denver Cherry Creek. For information, visit http://www.cadworxblog.com/cadworx-analysis-event-calendar/page_offset:-1/action:posterboard/time_limit:1372269599/cat_ids:38/.
To register, visit http://www.cadworxblog.com/cadworx-analysis-workshop-registration/. For information about ECE Design, visit http://www.ecedesign.com/.
About Intergraph CADWorx & Analysis Solutions
The Intergraph CADWorx & Analysis Solutions (CAS) products allow design and engineering to share relevant information seamlessly, thereby maintaining accuracy and improving efficiency. They include CADWorx Plant Design Suite for AutoCAD®-based intelligent plant design modeling, process schematics and automatic production of plant design deliverables; CADWorx DraftPro for intelligent 2D design and layout; CAESAR II, the world's most widely used pipe stress analysis software; PV Elite for vessel and exchanger design and analysis; and TANK for the design and analysis of oil storage tanks. For information on Intergraph CAS, visit www.coade.com.
Intergraph, the Intergraph logo, CADWorx, CAESAR II and PV Elite are registered trademarks, and TANK is a trademark of Intergraph Corporation. Other brands and product names are trademarks of their respective owners. © 2013 Intergraph Corp. All rights reserved.