A|E|C SYSTEMS...Technology for Design & Construction Announces 2004 Show Dates

DALLAS -- February 21, 2003 -- In an effort to better meet the needs
of attendees and exhibitors, Hanley-Wood Exhibitions, new owners of the
former A|E|C Systems and Computers for Construction, will combine both shows
and re-launch a single event titled, 'A|E|C Systems...Technology for Design
& Construction.'
To expand the range of resources available, the A|E|C
Systems...Technology for Design & Construction will be co-located World of
Concrete, which is also owned and produced by Hanley-Wood Exhibitions.
Held at the Orange County Convention Center in Orlando, Florida USA,
A|E|C Systems...Technology for Design & Construction will run February
18-19, 2004, with the conference program beginning one day prior to the
start of the show.
Retaining its own entity, A|E|C Systems...Technology for Design &
Construction will offer separate events and educational seminars targeted to
its specific industry. While there will be unique registration criteria for
the two events, badges will allow access to either event.
"Presenting these two shows in the same facility, at the same time,
allows each to maintain its own unique appeal, while benefiting from the
presence of the other," said Rick McConnell, Senior Show Director of A|E|C
Systems...Technology for Design & Construction. "We look forward to working
with the attendees and exhibitors of the former A|E|C Systems and Computers
for Construction shows to develop a first-class event that will serve their

Elimination of Computers for Construction
Through consolidation, the Computers for Construction shows,
originally slated for June 2-5, 2003 at the Washington Convention Center,
and November 11-13, 2003 at the Navy Pier in Chicago, will be eliminated and
merged into A|E|C Systems...Technology for Design & Construction.
"This decision was made to respond to the changing needs of the
industry," said McConnell. "We are very eager to produce a consolidated
event in an effort to maximize the value of participation in an industry
event by limiting the number of trade shows and pooling the resources
between these two strong shows."

About A|E|C Systems...Technology for Design & Construction
The A|E|C Systems...Technology for Design & Construction is open to
any professional actively involved in the AEC industry.
Featuring more than 300 booths using over 30,000 square feet, the
exhibit floor will provide the entire team the products, tools, and services
to increase efficiency and reduce costs throughout all phases of the
building project, including the design, construction, maintenance and
modification of commercial buildings, institutions and other structures.
Designed for those involved throughout the asset lifecycle, the show
will attract a worldwide audience of industry professionals including
architects, engineers, commercial contractors, builders and developers to
facility managers and owners.
Formerly owned by Penton Media and known as A|E|C Systems
International and Computers for Construction, these shows were sold to
Hanley-Wood Exhibitions in December 2002.
Beginning in 2005, the co-location of A|E|C Systems...Technology for
Design & Construction and World of Concrete will be held annually at the Las
Vegas Convention Center in Las Vegas, Nevada, USA.
For more information about A|E|C Systems...Technology for Design &
Construction, visit the official website at www.AECSystems.com, or contact
Hanley-Wood Exhibitions, P.O. Box 612128, Dallas, TX 75261-2128. Phone:
972-536-6380 or 800-451-1196. Fax: 972-536-6365. E-mail:
Email Contact.

About Hanley-Wood Exhibitions
A|E|C Systems...Technology for Design & Construction is owned and
produced by Hanley-Wood Exhibitions, a division of Hanley-Wood LLC, the
leading business-to-business information provider in the residential and
commercial construction industry. Founded in 1976, Hanley-Wood grew to $141
million in 2000. Hanley-Wood, LLC is owned by VS&A Communications Partners
III, the private equity affiliate of media industry merchant bank Veronis
Based in Dallas, the Exhibitions Division produces 10 trade shows,
including World of Concrete, Surfaces, the International Pool & Spa Expo,
the Remodelers' Show, and the JLC LIVE Residential Construction Shows. Four
of these shows are listed in the Tradeshow Week Top 200, including World of
Concrete at #13, Surfaces at #34, and the International Pool & Spa Expo at

# # #

Kim Rogers
Marketing Manager
Hanley-Wood Exhibitions
A|E|C Systems...Technology for Design & Construction
P.O. Box 612128, Dallas, TX 75261-2128
8600 Freeport Pkwy #200, Irving, TX 75063
972-536-6353 phone | 972-536-6365 fax
Email Contact

Review Article Be the first to review this article
Bentley:Be inspired

Developer-Support-Implementation Engineer for EDA Careers at San Francisco Area, CA
Solidworks Product Designer for NASCENT Technology at Charlotte, NC
SYSTEMS INTEGRATOR for Palm Beach County Human Resources at West Palm Beach, FL
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
DEX NYC ROUNDTABLE EVENT at 25 Madison Avenue, New York, NY 10016 New York, NY - May 3, 2017
AUVSI XPONENTIAL 2017 at 2700 S Quincy Street Suite 400 Arlington VA - May 8 - 11, 2017
Xponential 2017 at Dallas TX - May 8 - 11, 2017
IMEX Frankfurt at Messe Frankfurt Frankfurt, Germany - May 16 - 18, 2017
GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley: Be Inspired Awards
CADalog.com - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy