Leica Cyclone v7.1 Software Speeds Point Cloud Processing

(Heerbrugg/Cologne 5 October 2010) New Leica Cyclone v7.1, a significant advance in Leica Geosystems flagship Cyclone point cloud software, speeds these key office steps: (1) accurately registering multiple scans together and (2) navigating to and clearly visualizing specific areas of interest.

Faster, More Accurate Registration of Multiple Scans to Each Other
A powerful new registration option lets users automatically register scans together via inexpensive black-and-white paper targets, without the need to label scan targets. This not only eliminates any need to use uniquely labeled scan targets, but it also eliminates a time-consuming and often error-prone office process of reading target labels from scan data, manually typing these labels into the registration software, and then searching for and fixing any labeling errors. By using this new “position-based” target registration instead of label-based registration, users can achieve tighter registrations, faster.

Moreover, unlike methods that require the use of uniquely labeled targets throughout an entire project, Cyclone 7.1 lets you freely re-use black-and-white paper targets (labeled or unlabeled) on a project. Such targets are especially popular with phase-based scanning (Leica HDS4500 and HDS6x00 scanners), which often involves heavy usage of targets.

New, Faster Viewing Mode
When High-Definition Survey™ scan data of complex plants, buildings and ships are displayed on a computer screen, it can be difficult to clearly find and discern local areas of specific interest. Displayed points can include extra scan points far away from a local area of interest, thus confusing the viewer. An efficient, new “Local Seek” viewing mode in Cyclone 7.1 overcomes this problem.

The new viewing mode enables a user to see only scan points within close proximity of any chosen scan point. This makes it easier to browse through large point clouds and find local areas of interest. Once there, points are automatically displayed at higher density, thus also making it easier to discern features of interest. This new viewing capability is based on Cyclone 7.1’s point cloud Engine (pcE) that better organizes scan data for such tasks. 

More, Valuable Features
Cyclone 7.1 also:

  • supports registered scan data sets from ScanStation C10 that have been automatically registered in the field using C10 firmware v2.0’s “Known-point setup” and “Backsighting” capabilities
  • directly supports pcE data formats in the Cyclone SERVER module
  • features certification of all Cyclone products for use with Microsoft Windows 7
  • allows direct data export from Cyclone to Leica CloudWorx-VR for 3D Studio Max, etc.  

Availability
Cyclone 7.1 software is immediately available for all customers with valid maintenance contracts.

Leica Geosystems – when it has to be right
With close to 200 years of pioneering solutions to measure the world, Leica Geosystems products and services are trusted by professionals worldwide to help them capture, analyze, and present spatial information. Leica Geosystems is best known for its broad array of products that capture accurately, model quickly, analyze easily, and visualize and present spatial information.

 

Those who use Leica Geosystems products every day trust them for their dependability, the value they deliver, and the superior customer support. Based in Heerbrugg, Switzerland, Leica Geosystems is a global company with tens of thousands of customers supported by more than 3’500 employees in 28 countries and hundreds of partners located in more than 120 countries around the world. Leica Geosystems is part of the Hexagon Group, Sweden.

For further information please contact:
Leica Geosystems AG
Bill Wallace
Sr. Product Manager, Software
Tel 1-925-790-2356
Fax 1-925-790-2309

E-Mail: Email Contact

www.leica-geosystems.com/hds

 



Read the complete story ...


Review Article Be the first to review this article
 Benteley: watch the keynotes

Autodesk University 2017

Featured Video
Jobs
Vice President, Transportation Services for Associated General Contractors of New York State at Albany, NY
ENVIRONMENTAL GRAPHIC DESIGNER for Blitz at San Francisco, CA
Structural Engineer for The Planate Management Group LLC at Perry Point, MD
Structural Engineer for Albert Kahn and Associates at Detroit, MI
GIS Software Developer for UDC at Englewood, CO
Upcoming Events
Commercial UAV Expo Americas at ME - Oct 24 - 26, 2017
Nor Cal Bentley BASH at 2134 Main St #160 Huntington Beach CA - Oct 27 - 28, 2017
Design-Build Conference & Expo at Pennsylvania Convention Center Philadelphia PA - Nov 8 - 10, 2017
2017 Texas Society of Architects at 500 E Cesar Chavez St, The Neal Kocurek Memorial Austin Convention Center Austin Texas - Nov 9 - 10, 2017
GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley:YII2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise