HOUSTON, TX -- (Marketwired) -- Jun 14, 2013 -- Intergraph has announced six half-day CADWorx workshops, with four workshops in Houston, Texas on June 25-26 and two in Pittsburgh, Pennsylvania on June 26, 2013, all hosted by ECE Design. Two of the half-day workshops in Houston and one in Pittsburgh will focus on CADWorx Pipe Modeling and show how CADWorx 2013 enhancements can increase productivity by over 50%. Attendees will have the opportunity to try using hands-on CADWorx 2013 during the workshop. The other workshops, one in Pittsburgh and two in Houston, will provide attendees with a CADWorx 2013 catalog built specifically by ECE for designing oil and gas facilities and processes according to ASME B31.1, B31.3 and B31.8 standards. During this hands-on workshop, the leader will teach participants how to use the catalogs to quickly prepare piping specifications for production work. Each person will leave with a production-ready project file containing piping specifications for ASME Raised Face and Ring Joint 150, 300, 600, and 900 pressure classes.
The Houston workshops are at the ECE Houston Training Center, 7102 West Sam Houston Parkway North. The Pittsburgh workshops are at the Double Tree by Hilton Hotel in Carnegie, PA. For information about these workshops in Houston and Pittsburgh, visit http://www.cadworxblog.com/cadworx-analysis-event-calendar/page_offset:-1/action:posterboard/time_limit:1372269599/cat_ids:38/. To register, visit http://www.cadworxblog.com/cadworx-analysis-workshop-registration/. For information about ECE Design, visit http://www.ecedesign.com/.
About Intergraph CADWorx & Analysis Solutions
The Intergraph CADWorx & Analysis Solutions (CAS) products allow design and engineering to share relevant information seamlessly, thereby maintaining accuracy and improving efficiency. They include CADWorx Plant Design Suite for AutoCAD®-based intelligent plant design modeling, process schematics and automatic production of plant design deliverables; CADWorx DraftPro for intelligent 2D design and layout; CAESAR II, the world's most widely used pipe stress analysis software; PV Elite for vessel and exchanger design and analysis; and TANK for the design and analysis of oil storage tanks. For information on Intergraph CAS, visit www.coade.com.
Intergraph, the Intergraph logo, CADWorx, CAESAR II and PV Elite are registered trademarks, and TANK is a trademark of Intergraph Corporation. Other brands and product names are trademarks of their respective owners. © 2013 Intergraph Corp. All rights reserved.