Autodesk East Coast Headquarters Achieves LEED-CI Platinum Certification

Sustainable Design Drives Energy Efficiency for Autodesk’s New AEC Division Home

PHOENIX — (BUSINESS WIRE) — November 11, 2009Autodesk, Inc. (NASDAQ: ADSK), a world leader in 2D and 3D design, engineering and entertainment software, has announced that the interior of its architecture, engineering and construction (AEC) solutions division headquarters in Waltham, Mass., was recently certified LEED-CI Platinum by the U.S. Green Building Council. The official certificate of recognition will be presented to Autodesk at the Greenbuild International Conference and Expo 2009.

Designed by KlingStubbins, constructed by Tocci Building Corporation, and managed by Jones Lang LaSalle, Autodesk’s Waltham facility was an interior retrofit project of an existing 61,000-square-foot speculative office building that earned 46 LEED credit points, exceeding the 42-credit level required for a Platinum rating. The building also achieved LEED Gold certification for its exterior shell.

To earn LEED Platinum status, project stakeholders implemented sustainable design, digital design-to-fabrication and integrated project delivery (IPD) as part of an overall building information modeling ( BIM) process.

Maximizing Daylight Through Building Information Modeling

A crucial component to LEED certification is daylighting, with Platinum certification requirements mandating at least 90 percent of workspaces be illuminated with natural daylight. By linking the building’s Autodesk Revit Architecture 3D model with Autodesk Ecotect Analysis software, KlingStubbins carefully analyzed where daylight would fall within the facility and determined which design option best satisfied the goal. The result is an open, collaborative floor plan with low partitions and individual workstations positioned along the building’s perimeter. Overhead artificial lights in these areas are controlled by daylight sensors that automatically adjust for customized task lighting. Separate control zones for solar exposure enable localized management, while system automation ensures employees receive an even amount of daylight across the building.

“It was clear from the very beginning of the project that designing for a LEED Platinum rating was extremely important for Autodesk,” said Scott Simpson, senior director at KlingStubbins. “Using BIM technology, we modeled the mechanical, electrical and plumbing systems, natural and artificial lighting levels, and energy consumption to help us achieve this ambitious goal.”

Tocci Building Corporation worked alongside the design team to make the interior’s digital 3D models construction ready. Using Autodesk model-based technology, both architect and contractor were able to graphically depict, analyze and explain optimal solutions -- effectively communicating intent and reducing wasteful reinstallations and change orders.

“Knowledgeable and design-smart owners like Autodesk are often natural collaborators,” said John Tocci, CEO of Tocci Building Corporation. “Autodesk understood the models and our process, so they were poised to help our team troubleshoot and stretch the technology as far as it could go -- and in the process, infuse sustainable building principles and practices throughout the entire project’s execution.”

Managing Systems for a More Energy-Efficient Building

As several of the LEED categories require built-in monitoring and control equipment to encourage sustainable operations, Autodesk incorporated multiple operations systems into the building’s initial design, enabling the company to more accurately measure future energy efficiencies downstream. Leveraging the data-rich 3D models created using Autodesk Revit Architecture during the project’s design, Autodesk now employs an intelligent building management system to modulate lighting, HVAC and sound systems in response to space demand.

“This facility is a touchstone for the AEC industry,” said Phil Bernstein, FAIA, Autodesk vice president of building industry strategy & relations. “Its continuing success proves that integrated green design can carry efficiency throughout a building’s lifecycle. By driving out inefficiencies during the design phase, we were able to reinvest in the project for even greater long-term performance.”

Beyond design applications, the facility earned additional LEED credits for:

  • Procurement of renewable energy and its close proximity to essential community services
  • Use of 24.5 percent recycled building materials
  • EnergyStar-rated equipment and appliances
  • Bicycle storage with changing and shower facilities
  • Low-flow water fixtures, including dual-flush toilets (to save an estimated 260,000 gallons of water while reducing overall water usage and reliance on municipal service)

In addition, Autodesk continues to supplement energy-efficiency strategies with the purchase of green power.

To further demonstrate its commitment to sustainable technologies and green design within its own organization, Autodesk revitalized its office space in Mclean, Va., achieving LEED Gold certification. Project teams used 17 percent of salvaged materials for this 7,000-square-foot tenant improvement project.

About Autodesk

Autodesk, Inc., is a world leader in 2D and 3D design, engineering and entertainment software for the manufacturing, building and construction, and media and entertainment markets. Since its introduction of AutoCAD software in 1982, Autodesk continues to develop the broadest portfolio of state-of-the-art software to help customers experience their ideas digitally before they are built. Fortune 100 companies -- as well as the last 14 Academy Award winners for Best Visual Effects -- use Autodesk software tools to design, visualize and simulate their ideas to save time and money, enhance quality, and foster innovation for competitive advantage. For additional information about Autodesk, visit www.autodesk.com .

1 | 2  Next Page »



Review Article Be the first to review this article

Featured Video
Jobs
Systems Analyst for Johnson, Mirmiran and Thompson at Sparks, MD
Geographic Data Manager for Blue Raster at Arlington, VA
HPSA Designations and GIS Manager for Virginia Department of Health at Richmond, VA
GIS Analyst for Performance Software at Phoenix, AZ
Administrative Assistant / Data Entry Clerk for Bio-Nucleonics Inc. at New York, NY
Upcoming Events
2014 Trimble Dimensions User Conference at Las Vegas Nevada - Nov 3 - 5, 2014
IIDA NY Healthcare Forum: Modular Design + The Healthcare Environment at Hafele 25 East 26th Street New York NY - Nov 5, 2014
SPAR Europe 3D Measurement & Imaging Conference at Passenger Terminal Amsterdam Amsterdam Netherlands - Dec 8 - 10, 2014
European LiDAR Mapping Forum at Passenger Terminal Amsterdam Amsterdam Netherlands - Dec 8 - 10, 2014
Graphisoft Archicad
Bentley:Rapid deployment in a secure cloud-computing environment
CADalog.com - Countless CAD add-ons, plug-ins and more.



Click here for Internet Business Systems © 2014 Internet Business Systems, Inc.
595 Millich Dr., Suite 210, Campbell, CA 95008
+1 (408) 850-9202 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and ResumesEDACafe - Electronic Design AutomationGISCafe - Geographical Information Services	MCADCafe - Mechanical Design and EngineeringShareCG  - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy