Autodesk Sponsors 'PechaKucha' Events Worldwide
E-mail |
  • Print | Rate | Review me | More AEC News
  • Bookmark and Share

    SAN RAFAEL, Calif., Nov. 18 /PRNewswire/ -- Design Presentation Format Originated in Japan, Is Used by Creative People Everywhere

    SAN RAFAEL, Calif., Nov. 18 /PRNewswire-FirstCall/ -- Autodesk, a leader in design software, today announced a sponsorship of PechaKucha Nights, to support the design community and encourage designers to share their ideas and projects. PechaKucha Night --"PechaKucha" is Japanese for the sound of conversation -- takes place in more than 150 cities around the world.

    PechaKucha Night, devised by Astrid Klein and Mark Dytham of Klein Dytham Architecture in Tokyo, was conceived in 2003 as a way for designers to meet, network, and show their work in public. Using the PechaKucha format, presenters display 20 images, each shown for 20 seconds, allowing six minutes and 40 seconds for each presentation. The format was conceived to allow maximum diversity and minimize long-winded, overly intellectual presentations.

    "Artists, engineers, architects, manufacturers and animators -- designers of all kinds and backgrounds -- participate in PechaKucha Night," said Carl Bass, Autodesk president and CEO. "PechaKucha is a wonderful forum to communicate design ideas, and by sponsoring PechaKucha Night, Autodesk is reaching a global audience."

    For creative people in the Bay Area, the November PechaKucha Night will take place in San Francisco Nov. 20, 7 p.m., at the Autodesk Gallery at One Market. For more information visit San Francisco Pecha-Kucha online.

    Since 2006, Autodesk has hosted several PechaKucha Nights at its annual Autodesk University user event. PechaKucha Night at Autodesk University 2008 takes place Dec. 3, 7-8:30 p.m. in Las Vegas.

    Visit the PechaKucha website for more information and to find a location near you.

    About Autodesk

    Autodesk, Inc., is a world leader in 2D and 3D design software for the manufacturing, building and construction, and media and entertainment markets. Since its introduction of AutoCAD software in 1982, Autodesk has developed the broadest portfolio of state-of-the-art Digital Prototyping solutions to help customers experience their ideas before they are real. Fortune 1000 companies rely on Autodesk for the tools to visualize, simulate and analyze real-world performance early in the design process to save time and money, enhance quality and foster innovation. For additional information about Autodesk, visit www.autodesk.com.

    Autodesk and AutoCAD are registered trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product offerings and specifications at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document.

    (C) 2008 Autodesk, Inc. All rights reserved.

        Media Contacts
        Colleen Rubart
        Tel: 415-547-2368
        Email: colleen.rubart@autodesk.com
    
        Jennifer Ha
        Tel: 415-547-2435
        Email: jennifer.ha@autodesk.com
    

    (Logo: http://www.newscom.com/cgi-bin/prnh/20050415/SFF034LOGO)

    Web site: http://www.autodesk.com/
    http://www.pecha-kucha.org//




    Review Article Be the first to review this article

     AEC Weekly Magazine
    Susan Smith - Managing Editor
    Susan Smith
    AEC Weekly Magazine
    New Plant Design Suites Address Common Challenges
    Each AECWeekly Review delivers to its readers news concerning the latest developments in the AEC industry, along with a selection of other articles that we feel you might find interesting.
     Jobs
    Construction Project Manager for Intel at Albuquerque, NM
    Geospatial Software Engineer for Ultra Electronics, ProLogic at Dayton, OH
    Solutions Architect for Esri at Redlands, CA
    Local Government Software Sales Professional for Intelligent Information Systems at Durham, NC
    Geoprocessing Product Engineer for Esri at Redlands, CA
    CAD/CAM Sales Professional for PartMaker, Inc. at Fort Washington, PA
     Upcoming Events
    LEAF International 2010 at London United Kingdom - Sep 8 - 10, 2010
    BPM SELECT
    CADalog.com - Countless CAD add-ons, plug-ins and more.



    Click here for Internet Business Systems © 2010 Internet Business Systems, Inc.
    +1 (408) 850-9202 — Contact Us, or visit our other sites:
    TechJobsCafe - Technical Jobs and ResumesEDACafe - Electronic Design AutomationGISCafe - Geographical Information Services	MCADCafe - Mechanical Design and EngineeringNanotechCafe - Nanotechnology ResourcesPrinted Circuit Board Engineering and ManufacturingShareCG  - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
      Privacy Policy