Toshiba Launches High Efficiency, Low Noise Multi-Output System Power Supply ICs for Automotives

TOKYO — (BUSINESS WIRE) — September 29, 2013Toshiba Corporation (TOKYO:6502) today announced the launch of “TB9043FTG”, a multi-output system power supply IC that incorporates multiple DC-DC converters and series regulators1 for general automotive applications. Sample shipments start today, with mass production scheduled to start in October 2014.

Toshiba: "TB9043FTG", a multi-output system power supply IC for general automotive applications (Pho ...

Toshiba: "TB9043FTG", a multi-output system power supply IC for general automotive applications (Photo: Business Wire)

The growth of highly sophisticated automotive applications requires microcontrollers that operate with low power and high current. This increases the need for power supply IC incorporating DC-DC convertors with the high electrical efficiency required to reduce overall power consumption. The“TB9043FTG” integrates two channels of DC-DC converters and two channels of low noise series regulators, and can drive microcontrollers that require a 1A class large current load.
The IC also integrates a wide variety of monitoring functions and outputs monitoring status, which helps to contribute to improved safety of automotive applications, under “ISO26262”, the increasingly important standard for automotive functional safety.

Key Features of the New Product

1. Built-in 2 channels of DC-DC converters (1 output)
One Dc-DC converter generates 6V power supply from a car battery; and the other converter generates 1.2V, 1.5V or 3.3V (selectable) for the microcontroller core from the 6V supply.

2. Built-in 2 channels of series regulators (2 outputs)
The two series regulators independently generates 5V supplies out of 6V supply from DC-DC converter: 400mA current capacity is used for the microcontroller, and 100mA current capacity is used for a sensor or other interface.

3. Integrated monitoring functions
The product incorporates dual circuits for overheating detection and overcurrent limiter to secure continued operation in the even one circuit malfunctions.
The IC also integrates output voltage detector, and terminal for monitoring normal frequency.

4. Small package
The product adopts small HQFN52 package.

 

Main Specifications

Part number   TB9043FTG
Mass Production Volume 3 million pieces per year
Channels Built-in 2-channel DC-DC converters

Built-in 2-channel LDOs

Stop Mode 0μA (typ) when power supply is cut
Operating Voltage Range +7 to 18V
Operating Temperature Range -40 to 125°C
Current Capability Equipped with multi-output power supply in one IC to realize current capability of 1A class.
Safety Functions A variety of built-in monitoring and detecting functions for safety.
Detection Circuits ・Output voltage detector (overvoltage and undervoltage) and diagnostic circuit

・Inrush current limiter, IC thermal shutdown circuit

・Watchdog timer (independent 2 circuits)

・Power-on reset

・Frequency monitor

Package   HQFN52 (8mm x 8mm x 0.9mm)
 

1 | 2  Next Page »



Review Article Be the first to review this article

Autodesk University 2017

Featured Video
Jobs
Architectural Designer for Champion Home Builders at Troy, MI
Vice President, Transportation Services for Associated General Contractors of New York State at Albany, NY
GIS Analyst for G2 Partners LLC at San Ramon, CA
GIS Software Developer for UDC at Englewood, CO
GIS Software Developer for SoCalGas at Los Angeles, CA
Upcoming Events
Commercial UAV Expo Americas at ME - Oct 24 - 26, 2017
Design-Build Conference & Expo at Pennsylvania Convention Center Philadelphia PA - Nov 8 - 10, 2017
2017 Texas Society of Architects at 500 E Cesar Chavez St, The Neal Kocurek Memorial Austin Convention Center Austin Texas - Nov 9 - 10, 2017
2017 RCI Building Envelope Symposium at Omni Orlando Resort ChampionsGate Orlando Florida - Nov 13 - 14, 2017
GRAPHISOFT: ARCHICAD download 30-day FREE trial
Bentley:YII2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise