Open side-bar Menu
 3DEXPERIENCE Construction

Archive for December, 2014

Green Design Brings Nature into the Urban Jungle

Thursday, December 25th, 2014

 

dv520003

A jungle is green and leafy, and the urban jungle should be the same, right?

Since 2010, more people live in cities than in the countryside for the first time in human history. The trend is expected to speed up in developing countries, with more than 60% of the world’s population living in urban areas by mid-century, the United Nations predicts.

Bringing nature into cities can make urban environments more sustainable as well as more aesthetic, more comfortable, and healthier.

“Many architects today already claim to do green design, some to a greater level of authenticity than others. I contend that in the next five to 10 years just about every architect and student will do green design as second nature in their work,” says Ken Yeang, a principal with T.R. Hamzah and Yeang, a Malaysian architectural firm focusing on ecoarchitecture, and of Ken Yeang Design International in the U.K. “Green design is just one of the criteria for good design.”

Tweet: #Greendesign will be second nature for architects and students in the next 5-10 years @3DSAEC @Dassault3DS #AEC http://ctt.ec/5xUFN+

Click to tweet: “#Greendesign will be second nature
for architects and students in the next 5-10 years”

Architects often see green design as a matter of certification, such as the U.S. Green Building Council’s LEED, or Leadership in Energy and Environmental Design, or the Green Building Initiative’s Green Globes, or the Building Research Establishment’s Environmental Assessment Method (BREEAM) in the U.K. Beyond aiming for certification, “I take the holistic view of an ecologist,” he says. “I see green design as bio-integrating everything that we as humans make and do on the planet with the natural environment in a benign and seamless way.”

That requires integrating flora and fauna, water, humans, and the built environment in a holistic way. “We start design by looking at the ecology of the land and see how we can bring more nature back to a location and bio-integrate nature with the physical built environment,” Mr. Yeang says.

Solaris p2

The Solaris, designed by Mr. Yeang and part of the Fusionopolis research and development park in Singapore, has more than 8,000 square meters (9,567 square yards) of landscaping—13% more than the original site—thanks to roof gardens, planted terraces, and a 1.5-kilometer (0.9-mile) ramp of continuous vegetation that spirals up the 15-story building’s facade, helping to insulate as well as offering a range of habitats that enhances the locality’s biodiversity.

“I design buildings as ‘living systems’ and as ‘constructed ecosystems,’” Mr. Yeang says. “It’s not just about green walls. I bring back the native fauna that are not hazardous to humans and match these with the native flora selected to attract the fauna, now set as ‘biodiversity targets’ in a matrix. With this, I create the local landscape conditions to enable flora and fauna to survive over the four seasons of the year.”

The idea is spreading. A primary school and gymnasium in the Paris suburb of Boulogne-Billancourt, now under construction, was designed by architects Chartier-Dalix to be covered with a living shell and house local flora and fauna.

BLG-18-classrooms-school-and-sporthall p3

Argentine architect Emilio Ambasz built a multi-use government office building in Fukuoka, Japan, with 14 one-story terraces that make the one-million-square-foot building look like a green hill rising from the park in front of it. Mr. Ambasz also renovated the headquarters of ENI in Rome with curtains of vegetation.

Basel, Switzerland, has required since 2002 that flat roofs be covered with vegetation, in part to save energy and in part to protect biodiversity. While the peregrine falcon, one of the first species on the U.S. endangered species list in 1974, rebounded in part through urban nesting programs to nearly 100,000 birds world-wide today, less-glamorous endangered species, from spiders to beetles, also benefit from the increase in habitat. In the U.K., the Bat Conservation Trust has published a landscape and urban design guide for bats and biodiversity.

A green exterior is nice, but what goes inside—the design and materials—are important, too. “The building and products sector are seeing that environmental issues are moving up the agenda,” says Martin Charter, professor of innovation and sustainability at the Centre for Sustainable Design at the University for the Creative Arts in Farnham, U.K. “Construction, buildings and building products are associated with high carbon dioxide emissions on a macro level and big end-of-life waste issues. The sector does have a big-life cycle impact, not just in extractive phase but at other stages of life cycle as well.”

Concrete produces as much as a tenth of industry-generated greenhouse gas emissions. Researchers studying the molecular structure of cement found that changing the recipe to 1.5 parts calcium for each part of silica would cut cement’s carbon emissions up to 60% while making the resulting material stronger.

Tweet: Changing 1 ingredient in cement cuts carbon emissions by 60% & results in stronger material @3DSAEC #AEC #greendesign http://ctt.ec/gedd_+

Click to tweet: “Changing 1 ingredient in cement cuts
carbon emissions by 60% & results in stronger material”

Simple design considerations can make a building greener. The shape and the orientation can affect heating and cooling needs. Natural ventilation with mixed mode systems can alleviate the need for air conditioning even in tropical climates. Mr. Yeang designed the Menara Mesiniaga office building in Selangor, Malaysia, so even elevator lobbies, restrooms and stairwells in the 15-story building get natural ventilation and natural daylight.

Green design includes water management in rainfall harvesting and storing water, so potable water doesn’t have to be used to irrigate the vegetation. Design must close the water cycle within the site, combining water management, water reuse and recycling with sustainable drainage and constructed wetlands for black water treatment, he says.

“In nature, the only energy is from the sun. If we want to imitate nature, we should use only the sun,” Mr. Yeang says. “In nature, everything is recycled. Waste from one organism becomes the food for another. In human society, we have a throughput system where we use things and throw them away, but in fact, there is no ‘away’ in the biosphere—it just goes somewhere and pollutes the environment. If we imitate nature, we should have a closed system. As a design strategy, we need to study the attributes and properties of ecosystems as the basis for designing our built environment. When this becomes mainstream, there will be a stasis of nature with our built environment.”

 

Originally posted to Perspectives by Catherine Bolgar. For more from Catherine, contributors from the Economist Intelligence Unit along with industry experts, join The Future Realities discussion.

 

Tweet: Click to tweet this article: “#GreenDesign
Brings Nature into the Urban Jungle”


Related Resources:

Collaborative and Industrialized Construction Solutions from Dassault Systèmes

Sensing the City of the Future

Thursday, December 18th, 2014

 

Say “architecture in the future,” and you’re likely to think of buildings with a radical design, like the Absolute World Towers near Toronto, which twist some 200 degrees from base to top. But while architecture in the future might still be a feast for the eyes, other senses and feelings are likely to get more satisfaction as well.

sensing city 1

Absolute World Towers   Mississauga, Ontario

“Over the last 100 years, architecture has been a conversation about style,” says David van der Leer, executive director of the Van Alen Institute, a New York-based nonprofit architectural organization dedicated to the belief that design can transform cities, landscapes, and regions to improve people’s lives.

“What still largely is lacking in the conversation is how do we actually respond to the spaces we inhabit. If we know how the mind or body responds to the city, we may look at completely different ways of designing buildings.”

Recently, the institute undertook a project to understand people’s reactions to the city around them. The researchers walked around New York with residents of that city to find out how one, for instance, responds to a busy intersection.

Often the subjects, who were wearing brain monitors, would respond that everything was fine, but “their brain activity says something else,” Mr. van der Leer explains. “If we don’t respond well to structures, why do we build them?”

(more…)

What is Building Lifecycle Management (BLM)?

Thursday, December 11th, 2014

 

Building Lifecycle Management (BLM) is the practice of designing, constructing, and operating a facility with a single set of interoperable data.

BLM puts into practice a BIM Level 3 approach that enables a highly efficient Extended Collaboration process based on Manufacturing industry best practices.

BLM is operationalized via a robust Product Lifecycle Management (PLM)* system, which creates an efficient environment for coordinating complex AEC data.

[*The traditional Product Lifecycle Management term commonly becomes Project Lifecycle Management when applied to AEC.]

Adding BIM data to a PLM system creates a BLM system:

BIM + PLM = BLM

Benefits of BLM

BLM enables BIM Level 3 and can increase construction predictability, long-term value for project owners, and profitability for AEC project contributors.

(more…)

Adapting Manufacturing Industry Best Practices to Improve AEC Outcomes

Thursday, December 4th, 2014

 

The following is an excerpt from End-To-End Collaboration Enabled by BIM Level 3: An Architecture, Engineering & Construction Industry Solution Based on Manufacturing Best Practices.

Download the full paper here.


Tweet: Adapting Manufacturing Industry Best Practices to Improve #AEC Outcomes @Dassault3DS #BIM http://ctt.ec/n0ldR+Click to tweet this article: “Adapting Manufacturing
Industry Best Practices to Improve AEC Outcomes”

Extended Collaboration Enabled by BIM Level 3

An Extended Collaboration model synchronizes productive interactions between designers, suppliers, and builders.

Extended Collaboration proactively addresses errors and omissions, reduces rework, enables predictive process simulations to reduce risk, resolves issues in real-time to drastically reduce RFIs, and improves quality and safety.

Extended Collaboration improves project outcomes.

Innovative projects delivered by industry-leading design and construction teams have shown that collaboratively planning a building’s structural, façade, HVAC, electric, and interior systems can provide significant productivity gains over siloed processes, which depend on RFIs to reconcile issues.

(more…)




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise