Open side-bar Menu
 AECCafe Voice

Archive for February, 2018

AECCafe Voice’s Reality Capture Questionnaire

Wednesday, February 28th, 2018

Reality Capture has taken the AEC world by storm in recent years with its ability to capture existing conditions and create 3D models out of photographs or laser scans, without seams. Technologies used include 3D laser scanning, mobile and aerial LiDAR, and photogrammetry. This resulting point data is reconstructed into a 3D model. While accurate, LiDAR only captures 3D data leaving color out. Photogrammetry is another method by which Reality Capture is achieved. This type of Reality Capture uses photographs to reconstruct a 3D image.

An image in Bentley’s ContextCapture photo planning that shows operation (gray), 
target (yellow), and forbidden (red) zones.

(more…)

Kingspan Group Invests in the Future with Invicara

Thursday, February 22nd, 2018

Anand Mecheri, CEO and Founder of Invicara, spoke with AECCafe Voice about the company’s recent news of Kingspan Group plc’s $10 million investment in Invicara. Invicara is a provider of transformative cloud-based software solutions for the entire ecosystem of the built environment.

Invicara’s platform helps building owners and their design and construction partners create a data-rich, digital twin of a building.

(more…)

Autodesk Subscription “Switch-Back” Promotion Shows Some Heart, Sort Of

Friday, February 16th, 2018

There have been some changes to Autodesk recently. Perhaps most importantly for the users and owners, changes to the subscription program, that has been promoted by Autodesk as an “my way or the highway” approach to selling software, or cloud services as it were. As some people were not happy with being expected to purchase a subscription and give up their perpetual licenses, a new promotion has been initiated. This new promotion offers a “switch-back” option, meaning that if you own a perpetual license and you switch to a subscription, “If you’re not satisfied, you can switch back to your perpetual license.” This is the promise.

You can find out more about what this might mean for those who would like to continue with their perpetual licenses or revert to a perpetual license after finding the subscription program doesn’t work for them here.

How do I get this offer? (The first of the FAQs)

Simply trade in your qualifying old perpetual license(s) and purchase a new 1- or 3-year subscription to any eligible collection or individual product of your choice via one of the methods outlined.

Once you submit your perpetual license(s), you agree to discontinue use of the traded-in license(s). This offer ends April 20, 2018.

Which products qualify for the offer?

Most Autodesk perpetual licenses of releases R14 (release year 1998) through 2018 version product not on an active maintenance plan (as of December 31, 2017) qualify to get the offer discount.

When you trade in your qualifying perpetual license(s), you can get the offer discount on most Autodesk product subscriptions, including industry collections, AutoCAD, Revit, Inventor, 3ds Max, Civil 3D, Maya, and much more.

View list of all eligible products and full offer details here.

Can I get a different product than I have now?

You do not need to purchase the same product as the perpetual trade-in license. For example, you can trade in an old, eligible perpetual license of AutoCAD and subscribe to a collection at the promotional price.

(Eds note: This might work if you wanted to buy a subscription to a collection that contains AutoCAD, thereby seeming to get more for your money.)

What does “switch-back” option mean?

We’re confident that you will be satisfied with your subscription, but if for any reason that is not the case, you are eligible to switch back to your perpetual license at the end of either the 3-year term, or the end of the second year of an annual term (1 year plus 1 year renewal). See full details here.

In those full details, note this information:

Note that customers are only able to switch back to the versions set out below.

Version submitted Switch back: within “eligible term”* Customer obligations
2017, 2018 • 2016 version
• same product
• same deployment (e.g. SLM or NLM)
Contact Autodesk for details of how to switch-back
1998 – 2016 • Same version as submitted
• same product
• same deployment (e.g. SLM or NLM)
Retain media kits, download and/or activation details, and any other item necessary for operation of legacy license

Do I have to be connected to the internet to use my software?

No. After initial activation, your software will work offline for 30 days. At that point, you will need to reconnect. Don’t worry, we’ll remind you 7 days prior.

Will all of my work automatically go into the cloud?

Desktop applications and all associated user data are stored on your local machine. When you use cloud service applications, you can choose to either store data in the cloud or on your local machine. You retain all of your local data even if you decide to end your subscription.

Will I have updates whether I want to or not?

As a subscriber, you can access the latest updates anytime, but you decide if and when to install them.

What else can I do with subscription that I don’t have with my old software?

The subscription offerings provide you greater value and enable you to:

  • Always access the latest software, updates and previous versions
  • Use your software anywhere you need to be – at home, at work or on the road
  • Share 2D or 3D views of your work online and see comments directly in your product
  • Try out new tools without making a big up-front investment
  • Easily scale up or down to fit your organization’s changing needs
  • Instantly grant users access to products you have purchased by deploying them directly on devices or allowing users to install them on their own from the Autodesk desktop app
  • Get technical support – Choose phone, online chat, email or remote desktop assistance to resolve your issues more quickly

Learn more

Eds. note: Nowhere is there any mention of continued support, upgrades or maintenance if you do choose to “switch-back” to your old version of Autodesk software after dipping your toes into the subscription pool. What this offer offers: 1) the owner or user, gains the opportunity to try out the subscription-based arrangement with an option of turning back if he/she wants to. 2) Additionally, the subscription price is 25% less than it would be without this offer, so it might be a worthwhile incentive to move forward. 3) You may really save money on signing up for the Industry Collections.

You must make your decision within 30 days, if you want to “switch-back.” If you do switch back, you don’t get to pick up your perpetual license maintenance plan. You will also be sent back (kind of like in a game of Monopoly) to your perpetual license version you had before.

Extraordinary as it may seem, if you had purchased a 2017 or 2018 perpetual license, it appears (see above chart) that if you were not happy with your subscription plan, you would be switched back to a 2016 perpetual license. I’m hoping this is a typo, but so far that is what is stated on the website. Stay tuned; I have contacted Autodesk to find out further information.

Trimble Acquires e-Builder to Accelerate Industry Transformation

Thursday, February 8th, 2018

This week Trimble announced its acquisition of privately-held e-Builder, an SaaS-based construction program management solution for capital program owners and program management firms. While very often we might wonder what a company’s end goals are regarding an acquisition, e-Builder extends Trimble’s ability to accelerate industry transformation by providing an integrated project delivery solution for owners, program managers and contractors across the design, construct and operate lifecycle. e-Builder is a foremost survivor of the construction software management boom of many years ago.

(more…)

ASCENT’s New Courseware Materials

Thursday, February 1st, 2018

Twenty or so years ago, software programs were developing as the manuals were being written, and often the latest updates in the software didn’t make their way into the final manual. This opened the door for magazines providing software training, and physical classes. Since then, the internet, YouTube and Massive Open Online Courses (MOOCs) have increased the opportunity for technology education several fold. Training guides are still valuable learning resources, however, and ASCENT now offers videos inside the guides of various exercises.

Jennifer MacMillan, ASCENT, Instructional Design Projects Manager, talked about the trends and latest instructional curriculum offered by ASCENT. As the traditional instructor-led training is definitely in decline, the need for other types of learning opportunities abound.

“At ASCENT, we definitely feel there is room for both types of learning,” said MacMillan. “The instructor-led side of things absolutely has to occur to set the foundation for learning. As you start to develop the skills you need, you can rely on YouTube and on your peers to learn more. Understanding of high-level strategies is much easier once you’ve learned the basics. Definitely that self-paced learning is what you’re seeing.”

The biggest focus for ASCENT right now is around Autodesk Fusion 360’s curriculum.

“Many are not given the opportunity to go off and take a five-day training class,” said MacMillan. “They’re expected to hit the ground running with new projects all the time. Even if they run into a new software, they still have to get that project done. There’s no room to let that slip.”

In terms of ASCENT’s latest software offering with the Fusion 360 training guide, Fusion 360 is new within the last few years.

“What we found when we started to investigate this software product was there was tons of learning online, such as YouTube,” said MacMillan. “Even Autodesk released tons of learning that was video based, but everything was not at that foundational basic level. It assumed you had those skills. So, we asked, where do users get that skill? We wanted to fill that void with our training guides, because we felt that foundation was absolutely missing in terms of what was available online.”

Considering the fact that students can’t get away from the office for very long, ASCENT developed the Fusion 360 Guide. Fusion 360 is an easy-to-use software product from Autodesk. The book is self-paced so the student can purchase the book, and the training guide and work at their own pace. There is a lot of video content included inside the online training guide so students can learn from that.

“We’ve also found in our most recent training guide, often times the exercises we go through in the book are very focused on this or that task,” said MacMillan. “We felt there was a need to bring all the tasks and requirements together in project-based projects. We did that in the latest training guide, the Sculpting Training guide, where we also included videos. That’s the first time we’ve done that, including videos of the exercises. In the past, videos were always of the learning content and then you used those skills to do the exercises on your own. If you got lost, the only reference you had was going back to the learning content again. But with this latest training guide, it was complex enough that for these projects that we actually embedded some videos so that if a student got lost, they could watch these videos to figure out what was going on.”

Each chapter starts with objectives and what you will learn in each chapter, and then there’s a set of review questions, to be sure students have learned the objectives and content for the chapter.

Students can go to the e-store or go to Amazon and buy it. In ASCENT’s online learning portal, there would be a certification of completion at the end of that course.

The content is designed for people with different learning styles. Some people want it shown to them in video, some people want to read content. Some people want to go straight to the exercise and by trial and error try to figure it out themselves, or go back to resources as they make mistakes or as they need to. “Everyone’s style is completely different and that book has something for everyone,” said MacMillan.

The Autodesk Fusion 360: Introduction to Parametric Modeling book is a foundation book, including the interface and basics of working with parametric modeling. The one introduced prior to AU is one step up above the fundamentals. However, if someone is only working in that environment, that book is standalone as well. It would provide them with foundations if they were doing freeform organic modeling.

ASCENT is very much involved with Autodesk so they have access to their beta programs and beta software prior to release. By working with Autodesk’s developers and product teams they can learn the software and get a head start on building the books and materials before the software is actually released.

Courseware materials in the works include manufacturing and Inventor HSM. On the architectural side, the Autodesk Advance Steel 2018: Fundamentals book is due to release in early February, dealing with the Advance Steel product that Autodesk released.

Everything is in print. Purchases can be made through ASCENT’s e-store, Amazon or through ASCENT. You can purchase an online license to get into the learning portal, you can also purchase everything as an e-book, which gives you an access on your computer, not a PDF, but through a proprietary e-book provider.




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise