Open side-bar Menu
 AECCafe Voice

Posts Tagged ‘Autodesk University 2013’

UK BIM Alliance Roadshow and Updates 2018

Friday, June 1st, 2018

Coming up is the UK BIM Alliance Roadshow 2018, a tour entitled “Facilitating the Digital Transformation Of the Built Environment.” This event will offer information about how the UK BIM Alliance is making this possible for and with the industry. The news from the Alliance will include buildingSMART news and actual examples and case studies and begins June 21s in Birmingham, with the focus on the use of BIM in Facilities Management.

According to John Eynon, Founding Board Member, UKBIMA now has projects on the go, praise and patrons, some profit, and recognition on the global stage, particularly through their recent merger with buildingSMART UK+I.

They are also close working with the Centre for Digital Built Britain in Cambridge on the Level 2 and 3 agendas.

A little history: In October of 2016, buildingSMART UK launched the UK BIM Alliance, which was the UK government’s strategy for driving improvements across construction strategy, and by 2017, all public funded projects would be requiring BIM Level 2. This has been the evolution of the UK BIM Alliance.

Dr. Anne Kemp, Atkins, chair of BuildingSMART UK, Chair of ICE’s BIM Action Group, who spoke on the utility topic, “Out of Sight and Out of Mind” at the Bentley Year in Infrastructure Conference in London, asking at that time: “Did all projects transfer to BIM Level 2? Actually, we are a bit further from that in reality. Three million people must be reached. The guys who are being affected by utility strikes are those who we need to reach.”

Her focus was on knowing what’s underground in the way of utilities and using BIM and GIS tools to track outcomes.

“We need to be transforming our utilities through intelligent use of BIM, digital, long overdue collaboration, and common sense,” Kemp said.

Kemp said that the launch of the UK BIM Alliance was going to help their progress at the BuildingSMART UK for feeding data about their buried utilities.

In 2017, the GCS transition of Task Group to L3 (BIM Level) was predicted. There is a need for industry focus and stewardship of Level 2 and to achieve 2020 “Business as usual”. “We need the foundations of BIM Level 2 to be able to realize the ambitions of Level 3,” Kemp explained. “We are providing that industry focus of moving through analog into that digital transformation, through 3D modeling and integrated real time modeling. We are working at the structured controlled data in BIM Level 2. We’ve also got to control that uncontrolled dirty data, and how do we do that?”

There is a need to think about outcomes rather than just output, said Kemp, and not just discussing 2D drawings or data (or 3D). How does data need to be delivered in order for us to do our jobs?

“We have a convergence of what is needed with BIM, and that’s where the UK BIM Alliance comes in,” said Kemp. “BIM for rail, water, survey, hospitals, has a lot of interest around this area. The UK BIM Alliance grew out of government initiatives, and we are moving to BIM level 3. We need industry to step up and demonstrate BIM Level 2.”

The initiative really had to embrace the entire industry. By setting the mandate that they must achieve BIM Level 2 by 2020, they are challenging themselves. They are being innovative and inclusive and transparent.

“We target people who need to know about this stuff,” said Kemp. “BIM Level 2 has been defined. Bimlevel2.org is available and we’re here to help industry implement.”

There is BIM for infrastructure and there needs to be BIM for utilities.

What can we do from a buried utilities point of view?

What is complementary for ISOs and smart cities is working on an evolving landscape. The UK BIM Alliance is developing a taskforce on convergence with smart cities.

“Disruptive technology changes the face of industries, but we are also in an age of disruptive data,” Kemp concluded. “You have to have your people work through, understand and tailor themselves to the new processes.”

  • COBie to IFC processes
  • The BuildingSMART chair UK chapter is supporting the BIM Level 2
  • BIM enabled through to operations and maintenance
  • Not just about design and construction
  • TOTEX and total expenditure instead of operational expenditure.

The government is looking at procurement methods. The background to BIM is asset management.

Key decisions have to be made through the life of a project. You also have projects running simultaneously at different stages, so you need to be sure you have the right information, and data fed into a system users can trust.

She is looking forward to better information and management through BIM.

Autodesk BIM 360 Docs is designed to help government clients comply with the BIM Level 2 mandate in the UK. Process described here:

Autodesk and UK BIM Level 2 Mandate

Other UK BIM Alliance Events

The Product Data Working Group Alliance Product Data Working Group which is consulting on the state of the nation on product data has published two interim reports.
Meeting 1 Interim Report
M
eeting 2 Interim Report
Join the conversation on the dedicated #product_data slack channel or email us.

BIMovation – Faro are hosting an event on June 5th where Anne Kemp, UKBIMAlliance Chair will be speaking – register here

Facilitating the digital transformation of the Built Environment – The first of our roadshow events takes place in Birmingham on June 21st where John Eynon will be presenting the latest news alongside other guest speakers. Register here

CSIC Distinguished Lecture – Anne Kemp is delivering the distinguished lecture on June 29 where she takes A glimpse into the future….By considering the past.  The challenges, the opportunities – and our consciences. Register here

GDPR

The UK BIM Alliance has updated their privacy policy inline with the new GDPR regulations.  Please visit this page for more information.

 

 

 

 

Autodesk’s own 3D printer, Ember

Monday, December 8th, 2014

3D printing is not just about manufacturing anymore: it is destined to permeate the AEC industry as well.

In a press conference held at Autodesk University 2014, president and CEO Carl Bass and CTO Jeff Kowalksi introduced the company’s new 3D printer, Ember.

 

Autodesk Ember 3D Printer

Autodesk Ember 3D Printer

(more…)

Autodesk launches A360 to North American market

Thursday, September 4th, 2014

Around 2011, we began to hear about cloud project-based collaboration tool, Autodesk A360, and since that time around 1.5 million accounts have been created to use the tool. In January of this year, the tool evolved into a A360 Tech Preview beta, that attracted over 10,000 users.

Autodesk A360 addresses findings of two recent studies on collaboration, outlined in a recent press release from the company:

1.png

 

The A360 dashboard gives you a view of recent activity streams for all active projects.

(more…)

Sefaira for Revit offers daylighting visualizations inside Revit

Friday, August 15th, 2014

Katrina Schoen, product manager for Sefaira for Revit, spoke about the new daylighting visualizations now available for Revit users, accessed inside Revit BIM software.

What is Sefaira for Revit?

Sefaira for Revit delivers real-time building performance feedback inside Revit. Its daylighting visualizations allow designers to create spaces that take advantage of natural daylight while minimizing unwanted glare.

Sefaira for Revit Daylighting

Sefaira for Revit Daylighting

(more…)

Autodesk’s first quarter results look strong

Friday, May 16th, 2014

Autodesk reported financial results for the first quarter of fiscal 2015 on Thursday, May 15.

From the press release, here are the following primary results:

First Quarter Fiscal 2015
• Total billings increased 10 percent, compared to the first quarter of fiscal 2014.
• Total subscriptions increased by over 89,000, compared to the fourth quarter of fiscal 2014.
• Revenue was $593 million, an increase of 4 percent, compared to the first quarter of fiscal 2014 as
reported, and increased 5 percent on a constant currency basis. Revenue contribution from the recent
acquisition of Delcam was immaterial to first quarter results.
• GAAP operating margin was 7 percent, compared to 14 percent in the first quarter of fiscal 2014.
• Non-GAAP operating margin was 17 percent, compared with 24 percent in the first quarter of fiscal
2014. A reconciliation of GAAP to non-GAAP results is provided in the accompanying tables.
• GAAP diluted earnings per share were $0.12, compared to $0.24 in the first quarter of fiscal 2014.
• Non-GAAP diluted earnings per share were $0.32, compared to $0.42 in the first quarter of fiscal 2014.
• Deferred revenue increased 13 percent to a record $964 million, compared to the first quarter of fiscal
2014.
• Cash flow from operating activities was $219 million, compared to $224 million in the first quarter of
fiscal 2014.

The full press release, complete with predictions and webcast presentations can be found here.

Reality capture for building innovation

Thursday, January 9th, 2014

Josh Lowe, senior innovation advisor and Mike Whaley, president of TURIS Systems,spoke at Autodesk University during the session entitled, “BuildX: Construction Site of the Future.” Lowe and Whaley talked about the scanning revolution, or “reality capture” as it is now called.  TURIS  develops and implements project-specific Building Innovation Systems that utilize a technology-based modular approach for knowledge management. Laser scanning or reality capture has become more accessible, portable and more applicable.

(more…)

Keeping score on the construction site of the future

Tuesday, December 31st, 2013

In a session held at Autodesk University 2013, entitled “BuildX: Construction Site of the Future,” the future of building was explored by industry experts.

Senior vice president, Building Information Modeling, Amar Hanspal, said that construction employs the most number of people around the world (with the exception of health care). $7 trillion is tied up in the world of construction.

Iconic buildings are built in much the same way as they have always been built. Examples are the Empire State in 30s the Gherkin recently. They are labor intensive, and involve masses of  blueprints. “Over the last 80 years, the jobsite hasn’t changed dramatically,” said Hanspal. “We may talk about design and engineering changing, but the world of construction has more evolution to do.”

He added that the economists bash this industry a bit. “Every industry except construction has increased in productivity in the past fifty years.”

Construction companies are very pragmatic, yet they were the earliest adopters of cell phones, for people on jobsites. All GPS systems and location systems have been used in construction.

How does someone manage complex logistic in construction process?

Hannu Lindberg,Technology Manager, VPR Construction, talked on the topic, “Managing a Construction Supply Chain and Quality.”

“We’re seeing more schedules, and witnessing prefab and modular assemblies, which are becoming critical to projects,” said Lindberg.

This process is required to deliver product much earlier on, but also opens up possibilities to track these components much earlier on in the supply chain process.

Lindberg said “Lightspeed is too slow. We’ll have to go to right to ludicruous speed. We’re beginning to fabricate more products off site in order to make lead times. We want to install building blocks as they arrive onsite.”

Global sourcing materials are becoming global as well. “We have a process in place and have procurement lead time earlier in process. Parts are being brought from various parts of the world, preassembled in the factory, tagged with a barcode, put in storage, then delivered to the site.”

What if we integrated quality process into the process? Asks Lindberg. At the factory level QA inspections? “There is currently no transparency into that process from the perspective of the general contractor. If we build checkpoints for quality throughout the supply chain, starting at manufacturing level, with checking and enforcing this quality, the chances of poor quality showing up on jobsite is significantly lower.”

The system is still primarily paper-based. To improve communications between the subcontractors and the general contractor we can replace paper based systems with mobile, barcode scanners, and all the technology to simplify and improve the process.

(more…)

Sefaira for Revit announced at Autodesk University

Monday, December 9th, 2013

In a conversation with Carl Sterner, senior product marketing manager for Sefaira, he talked about the recent announcement of Sefaira for Revit plug-in at Autodesk University 2013. The company had announced Sefaira for SketchUp in the past couple of months, which Sterner said is very different from Sefaira for Revit.
(more…)

Autodesk University 2013 Report

Thursday, December 5th, 2013

Robots for the future jobsite, flying drones for delivering packages and reality capture were all part of the show at Tuesday morning’s Mainstage presentation at Autodesk University 2013. The event kicked off with a short little skit by Penn & Teller, who will apparently provide an entire show for AU attendees on Thursday.

Iris the robot

(more…)

Canon: oce crystalPoint
Kenesto: 30 day trial
Bentley: -YII 2018 Awards
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise