The AEC Lens
David Heller is the founder and President and CEO of IBSystems, Inc , MCADCafe's parent company. Always curious and on the look out for 'cool tech' he enjoys thinking outside the box and sharing his discoveries with you.
September 12th, 2013 by David Heller
This year’s HP workstation product launch event was the biggest I’ve ever attended, and the most exciting in terms of the revolutionary new product offerings presented and the people I met and interviewed.
We gathered early on Wednesday morning in a large hall in the NYC Sheraton Hotel, right in the midst of bustling Times Square, and to get the ball rolling were treated to speeches by some heavy hitting HP workstation users.
First at bat was Mark Russell, and he hit it out of the park. Mark is an independent Vfx creator and supervisor who headed up the special effect team during filming and now working post production on the upcoming Martin Scorsese film ‘The Wolf of Wall Street’ that’s destined to become a blockbuster when it hits the theaters later this year.
We were treated to some video outtakes from this production that showcased the VFx work that Mark produced for this film that was primarily shot and produced on Long Island and in Manhattan, just a quick subway ride to Brooklyn where Mark lives.
When you watch the film you won’t know where reality ends and CG takes over, it’s done that well. One series of fly-over shots were taken of a mansion in the Hamptons with multiple takes from a 4-bladed radio controlled miniature helicopter equipped with a super high-definition camera that transmitted the video wirelessly to an HP workstation on the ground for processing and viewing in real time. The mini-copter stays in the air for less than a minute before running out of juice and the ground crew had to plop in new batteries fast to get this small bird back in the air before the ‘magic’ light evaporated. The perfect lighting conditions occur close to sunset and the perfect light window lasts only around thirty minutes, so the film crew had to be super organized to shot this series in the allotted time, and keeping everyone and everything organized was a major part of Mark’s job. Oh, and they did make a rendered CG Model of the mansion that you can’t tell from the real thing for shots that the mini-copter just couldn’t cope with.
August 22nd, 2013 by Sanjay Gangal
I had the privilege of interviewing Justin Lokitz at our studio at our Campbell headquarters in the heart of the Silicon Valley. Justin is Senior Product Manager for Infrastructure & Collaboration Products at Autodesk. He is extremely knowledgeable and passionate about the new release. He talks about the history and evolution of InfraWorks 360 Pro as well as gives some fascinating applications of this product to make decision making easier for city planners. He also talks about how companies bidding on infrastructure projects gain a competitive benefit by using InfraWorks 360 Pro.
Dell offering the world’s thinnest and lightest mobile workstation and highest resolution UltraSharp Monitor
July 25th, 2013 by Sanjay Gangal
Article source: Dell
Dell has announced a new workstation and a 32 inch monitor. Here is some information from Dell about the workstation and the monitor:
May 16th, 2013 by Sanjay Gangal
Article source: Fiatech
Using computer technology for plan review, the plan approval process, and code checking streamlines building department operations and can be a boon for local economies. Fiatech and the International Code Council (ICC) have signed a Memorandum of Understanding that supports a shared vision to advance the effectiveness and efficiency of building design, construction, and code compliance through the use of advanced technologies and practices represented by the Fiatech AutoCodes Project. AutoCodes—automated code checking—is a significant development that moves regulatory compliance into the digital age on par with modern commercial design and construction industry practices.
“Fiatech is pleased to have ICC’s support in the development of AutoCodes, which will be a ‘game changer’ in the building design and construction process,” said Ray Topping, Director of Fiatech. “Our Memorandum of Understanding builds on the strong working relationship established with ICC over the past six years in advancing regulatory streamlining.”
“Automated code checking helps plan reviewers focus on the core tasks of code compliance and speeds up the permitting process,” said ICC Board President Ronald Piester, AIA. “This innovative technology will provide comprehensive and consistent results from project to project across jurisdictions and allow code officials to dedicate more time to safety issues, inspections, and other important duties.”
April 18th, 2013 by Sanjay Gangal
Carl Bass is president and chief executive officer of Autodesk, Inc. Autodesk is the leader in 3D design, engineering and entertainment software. Formerly he was Autodesk’s chief operating officer, responsible for worldwide sales, marketing, and product development.
Carl Bass talks about the new rules of innovation… at TEDxBerkeley. Innovation is happening at an unprecedented pace and will continue to accelerate because of 5 trends:
April 11th, 2013 by Sanjay Gangal
AECCafe.Com is exhibiting at the AIA Expo 2013 in booth #264 on June 20th and 21st. We are recording video interviews at the conference for exhibitors and architects attending the expo. Each interview is typically 3 – 7 minute long. For the exhibitors, we typically ask the following questions and a few follow up questions:
The questions can be customized for each company. We record the interviews in front of a green screen and then replace the background with the exhibitor booth picture or some other suitable backdrop. The architects are asked about their company, their recent projects, and about their design philosophy.
The interview is free for AECCafe Member Companies but we charge a nominal amount to other companies and architects to cover our expenses. Contact Sanjay Gangal if you are interested in booking a 15-minute time slot for the interview. You can see past interviews here.
To add a little fun to the conference, we are asking the conference attendees to share a joke in front of the video camera. The best jokes will be edited together in a video montage. The jokes have to be clean and funny.
Here is one of the interviews we recorded last year which has received more than 2,500 views:
February 28th, 2013 by Don Talend
Arizona State’s GIS master’s program thrusts students onto the leading edge of the field—and geospatial technologies
A good place to get a sense of where the geographic information system (GIS) field is headed is Lattie F. Coor Hall at Arizona State University in Tempe, Ariz. That’s the home of the 30-credit-hour Masters of Advanced Study in GIS (MAS-GIS) Program within ASU’s School of Geographical Sciences and Urban Planning. Here, students are exposed to not only the latest GIS concepts but also ever-evolving technologies.
ASU’s School of Geographical Sciences and Urban Planning offers additional options for GIS studies, including an undergraduate certificate and an undergraduate degree program that is in development. Like all master’s programs, though, the MAS-GIS is designed to convey the most advanced concepts in its field.
The program was developed from 2002–2003 and launched in 2004 by Dr. Robert C. Balling, Jr., who had overseen ASU’s Office of Climatology for 18 years. Balling—the associate program director—and several faculty associates—including Nik Smilovsky, MS, GISP, product specialist for Topcon Positioning Systems dealer RDO Integrated Controls in Phoenix—part of RDO Equipment Co.—teach a total of 10 courses in the program, which also includes an internship and capstone GIS project in the final semester. Typically, students start in the fall semester and complete their studies in 12 months.
February 19th, 2013 by Sanjay Gangal
Article source: Eric Bobrow
In this ArchiCAD tutorial excerpted from the Best Practices Course (http://www.acbestpractices.com) you’ll learn how to import manufacturer components as 3D library parts. These are becoming more widely available in IFC and DWG formats from many websites, and allow you to place highly accurate representations of actual real world equipment and furniture into your ArchiCAD models.
ArchiCAD 16 makes this an easy process. You can import IFC files directly using the File menu – File Special – Merge command, which will create a new library part and immediately place it. If it appears faceted (due to curved or detailed surface models), you may select a copy of the new object and use the Design menu – Convert to Morph command, then adjust the Morph settings to make the edges “Soft”. This will make both the 2D plan view and the 3D window (and Elevation) views much cleaner.
February 11th, 2013 by JV DeSousa
I’ll come right out and admit it. . . . . I’m a charrette-aholic.
What’s a charrette you ask? Well, the word really means “cart” in French and its relationship to architecture stems from the use of a cart to collect final projects in the design studios at the Ecole des Beaux Arts in Paris, but if you look it up on Wikipedia it says:
A charrette (pronounced [shuh-ret]), is often Anglicized to charette and sometimes called a design charrette. . . . In fields of design such as architecture, landscape architecture, industrial design, interior design, interaction design, or graphic design, the term charrette may refer to an intense period of work by one person or a group of people prior to a deadline. The period of a charrette typically involves both focused and sustained effort. The word “charrette” may also be used as a verb, as in, for example, “I am charretting” or “I am on charrette [or: en charrette],” simply meaning I am working long nights, intensively toward a deadline.
December 20th, 2012 by Aliya Jennifer
According to a study conducted by McGraw-Hill Construction, around 71 percent of the AEC companies in North America are using building information modeling (BIM) technology, as of 2012. Among the companies using BIM, nearly 50 percent have been using it for more than five years, while around 40 percent are implementing it in more than 60 percent of their projects.
Another survey, conducted by Design Master Software Inc. in 2012, among 74 engineers and designers from the US, Canada, and several other countries, revealed that around 62 percent of the respondents are already using 3D-BIM. Moreover, around 75 percent of those who are not using this technology said that they expect to use it on more than half of their projects during 2013, 2014 and 2015, while another 30 percent said that they will use 3D-BIM in all their upcoming projects in the next three years.