Open side-bar Menu
 The AEC Lens

Posts Tagged ‘Apple’

Ten Mid-May Economic Nuggets

Friday, May 13th, 2016

Article source: ConstructConnect

The U.S. and Canadian economies appear to have entered a ‘blah’ stretch. In April, U.S. total employment rose by 160,000 jobs, a tepid figure compared with the previous two months (i.e., +208,000 in March and +233,000 in February). The unemployment rate, though, stayed the same as in March, at a tight 5.0%.

The latest U.S. initial jobless claims figure shot up to 294,000 for the week ending May 7. Only four weeks prior, it had been as low as 248,000. The most recent 294,000 number does extend the streak of beating 300,000 for more than a year. If that’s ever been done before, it was way back in the early 1970s. But 294,000 is now cutting it close. It doesn’t permit much wiggle room. The foreheads of some economists are beginning to show worry lines.

Canada’s jobs pool shrank by 3,000 in April, although again the unemployment rate stayed on a par with the month before, at 7.1%. Total employment in Canada is presently +0.8% year over year, which is less than half the U.S. rate of increase, +1.9%. Specifically for the construction sector, on-site employment in the U.S., at +4.1% year over year, is significantly outpacing Canada’s +1.4%.

Against this backdrop, there are the following additional ‘nuggets’ to be gleaned from the latest government agency and private sector data releases. The ‘soil’ is rich and the ‘crop’ abundant.

(1) Where are the jobs of the future? With an aging population, on account of the post-World War II baby boom generation moving half-way and further down the hall of life, providing expanded and personalized health care is becoming more critical. Consider the following percentage changes. While the year-over-year increase in total employment in the U.S. economy in April was +1.8%, the jobs climb at hospitals was +4.0%; at assisted living facilities for the elderly, +4.1%; and in home health care, +6.1%.

(more…)

Big News For AEC – AutoCAD 2015 and AutoCAD LT 2015 for Mac Released

Tuesday, October 14th, 2014

Coming about six months after its major Windows releases, Autodesk, Inc. announced today the releases of AutoCAD 2015 for Mac and AutoCAD LT 2015 for Mac.

Although Autodesk estimates that only 1-3% of all Macs run CAD software, this is still a significant milestone for AutoCAD for the Mac platform, now in its fifth release. Significant because in the five years since the first release of AutoCAD for Mac, the Mac platform base and presence has expanded from about 15 million to today’s approximately 80+ million. A nice increase in potential market.

AutoCAD 2015 For Mac Overview

(more…)




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise