Open side-bar Menu
 The AEC Lens

Posts Tagged ‘Construction services’

Total U.S. Jobs +313,000 in February; Construction and Manufacturing Combine for +92,000

Tuesday, March 13th, 2018

Article source: ConstructConnect

In February, the U.S. recorded its biggest month-to-month jump in total employment in more than a year-and-a-half, according to the latest Employment Situation report from the Bureau of Labor Statistics (BLS).

Total U.S. Jobs +313,000 in February; Construction and Manufacturing Combine for +92,000 Graphic

A monthly net increase in jobs of +170,000 is acceptable; +200,000 is good; +300,000 is outstanding. February’s number was +313,000. (The last time a better result was achieved occurred in July 2016, at +325,000 jobs.)

The average jobs increase in the first two months of this year has been +20% compared with the average for January-February of last year, +276,000 over +230,000.

Because more people returned to the labor force and the participation rate climbed from 62.7% to 63.0% between January and February, the unemployment rate stayed at 4.1%. The jobless rate has been 4.1% for the past five months in a row, dating back to October 2017.

(more…)

U.S. December Jobs Creation ‘Weakish’, but Construction Compensation Bullish

Friday, January 5th, 2018

Article source: ConstructConnect

U.S. net total jobs creation in the final month of last year was a tepid +148,000, according to the latest Employment Situation report from the Bureau of Labor Statistics (BLS). The ‘weakish’ December result caused the monthly average throughout all 2017 to pull back slightly to +171,000

Just the same, +171,000 as a monthly average in 2017 signifies a more than satisfactory performance, although it was down from 2016’s comparable figure of +187,000.

The U.S. unemployment rate in December remained the same as in November, at an exceptionally tight 4.1%.

The seasonally adjusted (SA) number of U.S. construction jobs recorded a nice gain in December of +30,000. Such a substantial increase in employment for on-site workers was the biggest leap since February 2017’s +54,000.
(more…)

Expected BIM Trends in 2013

Thursday, December 20th, 2012

BIM Trends for 2013

According to a study       conducted by McGraw-Hill Construction, around 71 percent of the AEC companies in North America are using building information modeling (BIM) technology, as of 2012. Among the companies using BIM, nearly 50 percent have been using it for more than five years, while around 40 percent are implementing it in more than 60 percent of their projects.

Another survey, conducted by Design Master Software Inc. in 2012, among 74 engineers and designers from the US, Canada, and several other countries, revealed that around 62 percent of the respondents are already using 3D-BIM. Moreover, around 75 percent of those who are not using this technology said that they expect to use it on more than half of their projects during 2013, 2014 and 2015, while another 30 percent said that they will use 3D-BIM in all their upcoming projects in the next three years.

(more…)

Future of Building Information Modeling

Wednesday, July 25th, 2012

Did you know that designers of the very first automobile dubbed the invention as “horseless carriages” since they were reluctant to change their mindset and accept a revolutionary technology? Similarly, designers of steel frames covered them in masonry so that they looked like already-known bearing wall structures. It took them years to utilize the expressive capability of steel that is quite prevalent in designing buildings today. There are scores of other examples where almost every industry has tried to dismiss an innovative solution and attempted to shape it according to familiar practices. But eventually, true innovation conquers all. The AEC industry is also undergoing a similar phase with BIM technology. Nevertheless, scope and future of BIM services is resplendent with opportunities galore. Let us get a sneak peek at what the future holds for Building Information Modeling.

Building Information Modeling – The Future Ahead

The increased awareness about green energy efficient homes has led to an amplified interest in Building Information Modeling services as the means to achieve this. The drivers of adopting green technology include energy efficiency, environmental health and generating less waste. With BIM technology, AEC firms can build facilities with Green House Gases (GHG) control, carbon regulation and zero emissions.

(more…)

BIM – A Collaborative Approach to Working

Wednesday, July 18th, 2012

Companies such as Toyota and Boeing in the manufacturing sector have been using digital design models for decades and now seem to have become masters in the art of collaborative projects. For the construction industry to reach that level where collaborative thinking is second nature, the industry needs to expand its view and come out of its safe haven. Clashes between architects and engineers, or between contractors and suppliers are not uncommon. Building Information Modeling, with its very core of collaboration, attempts to bridge these gaps between different stakeholders. Slowly and steadily, the AEC industry is also moving on to that plane where an integrated approach is fast replacing the traditional methods.

Building Information Modeling

Integrated practice is the key to collaboration in any domain. An integrated approach is when all the stakeholders involved in a construction project life cycle – architects, designers, engineers, contractors etc. work together. Throughout the whole building life-cycle, they can, together, do their bit of value addition towards the final structure. Such a collaborative way of functioning offers enhanced quality and efficiency for all building processes, thereby resulting in achieving cost effectiveness as well as client satisfaction, which is crucial to any project.

(more…)




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise