Open side-bar Menu
 AECCafe Today
Susan Smith
Susan Smith
Susan Smith has worked as an editor and writer in the technology industry for over 16 years. As an editor she has been responsible for the launch of a number of technology trade publications, both in print and online. Currently, Susan is the Editor of GISCafe and AECCafe, as well as those sites’ … More »

Pictometry/AutoCAD Civil 3D integration

 
January 11th, 2013 by Susan Smith

Pictometry International Corp., inventor of measurable, aerial oblique imagery and analytics tools, launched Pictometry Integration for Autodesk AutoCAD Civil 3D 2013 and 2012 products at Autodesk University the last week of November 2012. Now users’ high resolution geo-referenced aerial imagery can be accessed from directly within the AutoCAD Civil 3D workspace, enabling users to visualize and take measurements of real-world field environments, helping reduce the need for field visits. AutoCAD Civil 3D use has grown phenomenally over the past two-three years, and continues to climb, according to experts in the field. It will also certainly benefit Pictometry to gain access to Autodesk’s millions of users.

Read the rest of Pictometry/AutoCAD Civil 3D integration

AECO Industry Predictions for 2013 from Microdesk

 
January 7th, 2013 by Susan Smith

Mike DeLacey, president of Microdesk, spoke about the company’s AECO industry predictions for 2013. Microdesk provides business and technology consulting services to help firms plan, design, build and operate land and buildings. At Autodesk University 2012, the company presented their predictions, which were brought to the forefront by natural disasters such as Hurricane Isaac and Hurricane Sandy that swung the spotlight onto the country’s failing infrastructure.

Top five trends DeLacey outlined are as follows:

  1. Rebuilding America “Hurricane Sandy is fresh in our minds, and we think in the coming months people are going to push for the use of technology in building, not only in the wake of Sandy but around the current crisis with infrastructure. Governor Cuomo talked about the advantage of technology and what we think the future will look like, especially with climate change and some of the storms we’ve had hit New York in years past. This push for technology is associated with infrastructure.
  2. Regulatory Compliance “We are seeing significant push for BIM for non-traditional use. The appetite for BIM is increasing based on increased ways to use the model. More government organizations are developing BIM-based workflows that will add efficiencies in regulatory compliance and design review. We think the use will influence the industry and further adoption at more levels.”
  3. Increased focus on the I in BIM “By that we see a critical mass at this point and more and more purpose-built apps taking advantage of information in the models. Look at the integration of Maximo and Revit or mobile apps that can stream specific parts of the model to your mobile device based on information in the model. BIM has found its way more and more into field operations, material management  and other uses that go beyond project delivery to help with more efficient facility operations and maintenance.”
  4. Mobility “Mobility is hitting critical mass but in 2013 will become an industry standard.  This may be the last year it’s on the list. We’re so connected in our personal lives, but in our business word we’re not connected, we are still chasing information around. I think it will change quickly – I think the Microsoft Surface new tablets/laptops that will all run Windows 8 will be the business equivalent of the iPad. It will be interesting to see if iPad can make itself a staple in the business environment. The iPad hasn’ been able to replace my laptop. I haven’t seen Apple make huge strides in the business world, there is still disconnection.”
  5. Cloud “The Cloud is still young and will be on the list for the next three years, until we’re actually running our design and construction apps from the Cloud. I think a lot of people who are in the position to make a decision about the Cloud are old enough to remember the Burroughs B25. That evolved from your user space and processing power on a desktop. Now we’ve grown up to a laptop that’s more powerful than that, where no one limits my space or processing power. We have created an independent computing generation and for a lot of people they think of the Cloud as going back to the Burroughs, having limited space. I think the reason that Autodesk put the 12-year-old on stage to was to demonstrate that they are growing up in a world the connectivity – anything they have on any device is so natural to them any time and anywhere.”

Q and A with Carl Bass, AU2012

 
December 5th, 2012 by Susan Smith


In a press Q&A with Carl Bass and Jeff Kowalski, the following questions were asked:

What are some of the most important areas you are entering into?

Bass: Change in the industry is slow. It’s been 12 years since BIM and people are still trying to figure out how to get the maximum benefit from it. Construction is one of the most important areas we’re entering into and manufacturing is the other.

Why do you think the consumer market is important?

Bass: Maybe you shouldn’t care about consumers, on the other hand, we have the interaction of culture and technology. We’ll have something like 100 million users that are engaged in creative and design activities by the end of the year. I wouldn’t have thought that population existed a few years ago.

There is a huge amount of attention paid to Autodesk by the media now because of our attention to consumers. 50 percent of our media attention is coming from consumer stuff. We don’t want to detract from our professional customers doing what they want to do. We will always be a company providing solutions for design.

What is the importance of 3D modeling?

Bass: Moving to 3D modeling has never been the goal in itself. We’re nowhere near having the ability and the depth to be able to move it through process.

The core model data is not important in Fusion 360. We should get as flexible with our tools as we do with drills, etc. We are tool-centric in our use of data. The learning curve for some tools is so heavy we try to use those tools for everything.With Fusion 360 we want to be able to use the best tools for the job.

Quotes from AU2012 Attendees

 
December 3rd, 2012 by Susan Smith

Last week Autodesk University 2012 attendees had their fingers on the pulse of what they need to get out of the conference and their conversations reflect an interest in more information about products.

Read the rest of Quotes from AU2012 Attendees

AU2012: The Cloud and the Maker community

 
November 27th, 2012 by Susan Smith

The message at this morning’s keynote at Autodesk University revolved around the cloud and the maker community. These two topics were big last year, but this year they dominated the discussions at the keynote, with guest speakers who are truly on the cutting edge of the maker community.

Read the rest of AU2012: The Cloud and the Maker community




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise