Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

Folds house in North London, England by bureua de change architects

 
August 18th, 2015 by Sumit Singhal

Article source: bureua de change architects

A three storey period terrace house in North London, appealed for a scheme that would open up views to the adjoining Parkland Walk conservation area.The focal point of the project is a pleated roof at the back of the house, which appears to be formed from a flat surface, forced to crinkle up into a faceted structure, as it is pushed up against the exterior wall. From the garden, the pleats are purposefully sunk from view, creating the impression of a simple flat roof, which allows the character of the original building to stand out.

Image Courtesy © bureua de change architects

Image Courtesy © bureua de change architects

  • Architects: bureua de change architects
  • Project: Folds house
  • Location: North London, England
  • Photography: bureua de change architects

Image Courtesy © bureua de change architects

Image Courtesy © bureua de change architects

Katerina Dionysopoulou, Co-Founder of Bureau de Change says: “With the pleated roof we wanted to not only bring a graphic feel to the modern extension, but also to create a feeling of motion which would emphasise the meeting of old and new.”
The poise of the roof offers natural points for the placement of generous skylights, bringing light into the living area, which would otherwise be shrouded by its position in the centre of the house.

Image Courtesy © bureua de change architects

Image Courtesy © bureua de change architects

Image Courtesy © bureua de change architects

Image Courtesy © bureua de change architects

Importantly, these openings also satisfy the owners’ desire to see the nearby woodland whilst relaxing in the space.Forming a side and rear extension, the roof expands the existing kitchen and creates a new dining and work area. The roof pleats are replicated along the party wall, concealing a home office which can be opened up when required.

Image Courtesy © bureua de change architects

Image Courtesy © bureua de change architects

Image Courtesy © bureua de change architects

Image Courtesy © bureua de change architects

The boundary of the kitchen is marked assertively by the end of the pleated ceiling, which is capped by a midnight blue surface that emphasises its ample peaks and troughs. Darkened surfaces continue through the kitchen into a long passage that extends along the left side of the property, conveniently and discreetly creating a storage and utilities ‘zone’.

Image Courtesy © bureua de change architects

Image Courtesy © bureua de change architects

Image Courtesy © bureua de change architects

Image Courtesy © bureua de change architects

Commenting on the design, Co-Founder Billy Mavropoulos:“Materials and colours were carefully proportioned and distributed to visually mark the transitions between living spaces and create a natural circulation.”The scheme is characterised by a rich palette of colours, materials and textures, which create a different experience in each space. Large terrazzo slabs, encaustic tiles and tonal parquet, complement the complexion of the original building, whilst enhancing the graphic impact of the angular extension.

Image Courtesy © bureua de change architects

Image Courtesy © bureua de change architects

About Bureau de Change:

Bureau de Change was founded by architects Katerina Dionysopoulou and Billy Mavropoulos. Its work is a direct product of the founders’ upbringing, passions and experiences – combining the pragmatism and formality of their architectural training with a desire to bring a sense of theatre, playfulness and innovation to the design of spaces, products and environments.
The result is a studio where rigorous thinking and analysis are brought to life through prototyping, testing and making (weaving, casting, welding, carving). Recent projects have used bespoke cast brickwork, woven furniture and rapid prototyping to form sculptural surfaces.

Tags: ,

Category: Residential




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise