Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

Elgtårn (Moose tower) in Espedalen, Norway by RAM Arkitektur AS

 
October 29th, 2016 by Sumit Singhal

Article source: RAM Arkitektur AS

Espedalen is a valley situated in inland Norway to the east of Jotumheimen national park. The valley is home to the largest moose migration route in Europe. RAM Arkitektur was initially approached by the local community to suggest five architectural interventions in the region, with the aim of boosting tourism within the area. Momentum quickly built around and early sketch for a moose-viewing tower, with basic overnight accommodation for six people, located on public forestry land, and in the heart of the migration route.

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

  • Architects: RAM Arkitektur AS (Sam Hughes MNAL)
  • Project: Elgtårn (Moose tower)
  • Location: Espedalen, Norway
  • Photography: Sam Hughes
  • Software used: SketchUp and AutoCAD
  • Client: Ruten fjellstue and Dalseter Høyfjellshotell
  • Structural engineer: COWI AS
  • Fire consultant: COWI AS
  • Building firm: Skåbu tradisjonsbygg AS
  • Area: 26m2
  • Project year: 2015 – 16

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

The 12 meter high tower is located on the edge of a small rocky outcrop, sitting on simple anchor points drill directly into the bedrock to minimise the buildings impact on the natural environment. It offers accommodation of a basic standard, with simple wooden platforms for beds, and has no running water or electricity. Guests are expected to take their own camping equipment, although bedding and food can be provided on request. Heating is provided by wood stoves, one on each level.

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

The entire building is raised three meters off the ground, with a covered outdoor sitting space under the building at ground level. The first plan is a 12sqm bedroom with six beds. Each bed is cantilevered out from the main structure and surrounded on three sides by glass to create the experience of sleeping outside in nature. The second level is a 12sqm ‘viewing lounge’ with a panoramic view of the surrounding landscape, and basic cooking facilities on a wood stove. The top level is a public viewing terrace, and a ‘treetop’ toilet. The toilet is a gas powered combustion toilet, and the room has surround windows on three sides, offering a panoramic treetop view, while still giving privacy from the roof terrace. Vertically the rooms are connected by and external staircase, which allows access to the viewing terrace to the general public. This was one of the premises for the building permit to be granted on public forestry land.

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

Due to the remote location of the site, and limited accessibility with heavy machinery, it was an important consideration that the majority of the construction was based on prefabricated elements. Each element should not exceed a size that could be handled by two people without assistance of heavy machinery. In addition to this, the elements should be possible to transport by snow scooter in the winter months, to further reduce damage to the delicate flora in the immediate area around the tower.

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

Inspiration was drawn from the rich local history of log construction, and its logical modular construction principle. A pre-machined log element with dovetail corner joints produced by Varpin AS, was chosen for its precision and relative cost effectiveness. The massive wooden construction ‘is what it is’ without the need for building up layers of materials and finishes. It is stacked directly onto the main glue laminated bearing structure. In this way the construction process could also be complete directly from the main structure, without the need for additional scafolding to mount external cladding.

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

Image Courtesy © Sam Hughes

Image Courtesy © RAM Arkitektur AS

Image Courtesy © RAM Arkitektur AS

Image Courtesy © RAM Arkitektur AS

Image Courtesy © RAM Arkitektur AS

Image Courtesy © RAM Arkitektur AS

Image Courtesy © RAM Arkitektur AS

Image Courtesy © RAM Arkitektur AS

Image Courtesy © RAM Arkitektur AS

Tags: ,

Categories: Autocad, SketchUp, Tower




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise