Open side-bar Menu
 ArchShowcase
Sumit Singhal
Sumit Singhal
Sumit Singhal loves modern architecture. He comes from a family of builders who have built more than 20 projects in the last ten years near Delhi in India. He has recently started writing about the architectural projects that catch his imagination.

Ananda Manglam Towsnhip in Jaipur, India by GPM Architects & Planners

 
September 23rd, 2019 by Sumit Singhal

Article source: GPM Architects & Planners

Spread across 35 acres, the Aananda Township is located in Sanganer area, that is being developed as an extension to Jaipur city, Rajasthan, India. Designed for a luxurious lifestyle, this ‘Complete city’ promotes sustainable habitats. With an emphasis on pedestrian friendly green areas, the township integrates all essential facilities for a rejuvenating experience.

With an FAR of approx. 2, the total built-up area is 2,560,000 sq.ft or 2,39,000sqm, the township is located 4.5 km from the InternationalAirport, very close to Sanganer Railway Station and 4 km from Jawahar Nagar Circle. Taking inspiration from the traditional street – courtyard concept for arid habitats, where a system of transition – public to semi-private to private is planned. A network of streets leads from the main vehicular peripheral road to the central green area, where the streets act as spill-out spaces for residents. This enables a large green area, which that actsas the highlight for the development.

Image Courtesy © GPM Architects & Planners

  • Architects: GPM Architects & Planners
  • Project: Ananda Manglam Towsnhip
  • Location: Jaipur, India
  • Text: GPM Architects & Planners, New Delhi
  • Project Built Up Area: 2,560,000 sq.ft
  • Project Duration: 2006-2016

Image Courtesy © GPM Architects & Planners

The residential units are centered around the large linear central park, which is set to delight residents of all age groups. An inviting avenue greets the residents towards a central roundabout which is designed as an amphitheater that emphasizes the importance of social spaces in the design. A network of streets leads fromthe peripheral road to the central green area. Each residential block is accessed through these streets. Streets act as semi-public spill-out spaces for the residents; hence acting as a transition space from public to private.

The development is planned in phases, to ensure maximum efficiency of workflow and quality control. Phase 1 is planned on a land area of 86,330 sq. m., with built-up area of 97,225.8 sq. m. The Phase 1 of the project includes a Ground+ 4 storey structure. The blocks are low-rise and hence minimize structural cost and create a sustainable, cost-effective environment. Also, it reduces the extra cost for providing fire-fighting services, which is required for any building exceeding 15M height. With a ground coverage of 26.82%, a landscape area of approximately 12,500 sq. m is planned. The Integrated Green in the center provides micro-cooling subsequently reducing Heat Island effect.

Image Courtesy © GPM Architects & Planners

Image Courtesy © GPM Architects & Planners

Imbibing cues from traditional architectural elements and solar passive cooling techniques, a combination of pergolas, jaalis and shading elements is developed which have been incorporated in a simple and sophisticated manner to create an appealing façade.These elements complement the overall façade design, at the same time being cost effective and environment-friendly. The residential units have been designed to maximize cross-ventilation, the intake of natural light in all rooms, thereby minimizing dependency on HVAC and electricity. The shading Devices over fenestrations, Pergolas, and the Juxtaposition of volumes create shadows, increase local air flow and enable micro cooling. Eco- friendly building materials viz. PPC cement, steel, pre-cast hollow concrete blocks, ready mix concrete, bricks, stones, sand, hard wood, aluminum, glass, etc. are used. Materials are procured from nearby sources, to minimize travelling costs and consequently air pollution.

Image Courtesy © GPM Architects & Planners

Image Courtesy © GPM Architects & Planners

All plots are East-West Facing, to allow maximum sunlight intake in all the residential units. Phase 1 isplanned as a Low Rise development for lighter intake to reduce light load, and increase air-flow. Soft pavement is used at parking spaces, to avail maximum ground water absorption.Measures are taken to minimize air pollution during construction and post construction phase and to attain zero discharge within the complex. Waste is recycled and used within the site and the use of a Sewage Treatment Plant & Rain Water Harvestingminimizes dependency on fresh water supply to tackle the issue of water scarcity in the city. The runoff from the building terraces, paved areas and landscape areas ischannelized to the rain water harvesting structures designed on the peak intensity of rainfall (40 mm/hr) to accommodate peak surface runoff, which avoids the problems of flooding.Waste Management techniques have been planned to enable Separate bins to treat waste as per its nature.

Image Courtesy © GPM Architects & Planners

Image Courtesy © GPM Architects & Planners

Amalgamatingtraditional architectural elements with the modern-day development,Aananda Township establishes itself a benchmark in Sustainable residential developments in the city, where sustainability is not an artificial layer that is added, but is instead integrated with design right from conceptualization.

Image Courtesy © GPM Architects & Planners

Image Courtesy © GPM Architects & Planners

Image Courtesy © GPM Architects & Planners

Image Courtesy © GPM Architects & Planners

Image Courtesy © GPM Architects & Planners

Image Courtesy © GPM Architects & Planners

Tags: ,

Categories: Apartments, House, Housing Development, Park, Residential




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise