Open side-bar Menu
 ArchShowcase

Archive for the ‘Autodesk’ Category

Asturias Fine Arts Museum in Spain by FRANCISCO MANGADO

Tuesday, October 31st, 2017

Article source: FRANCISCO MANGADO

The new extension of the Fine Arts Museum of Asturias is integrated into an urban complex which through successive expansions has made room for one of Spain’s finest art collections. After the enlargement, this urban complex will take up much of its block in the historical center of Oviedo, close to the cathedral and surrounded by streets with high value in the memory of natives of the city as well as visitors, and bordering also with the city’s most representative square.

Image Courtesy © Pedro Pegenaute

(more…)

Palm tree house in Jundiaí, Brazil by Aresto Arquitetura

Monday, October 30th, 2017

Article source: Aresto Arquitetura

Built on a flat lot with only 11 meters wide, the residence located in the city of Jundiaí, consists of a single elongated volume and two slabs.

On the ground floor are: the entrance hall, the living room, the dining room, the kitchen, the toilet, the laundry room, the pantry, the storage room, the gourmet space, and the pool. On the upper deck are: the hometheater and the three dormitories.

Image Courtesy © Aresto Arquitetura

  • Architects: Aresto Arquitetura
  • Project: Palm tree house
  • Location: Jundiaí, Brazil
  • Software used: SketchUp, Autocad, Revit

(more…)

Ravens Enclosures, HM Tower of London in England by Llowarch Llowarch Architects

Sunday, October 29th, 2017

Article source: Llowarch Llowarch Architects

Commissioned by Historic Royal Palaces the RIBA award winning new night accommodation for the Tower Ravens’ re-presents the Ravens to the public, providing a focal point for expanded interpretation of these legendary residents of the Tower.

Image Courtesy © Jack Hobhouse

  • Architects: Llowarch Llowarch Architects
  • Project: Ravens Enclosures, HM Tower of London
  • Location: London, England
  • Photography: Jack Hobhouse and Edmund Sumner
  • Software used: Vectorworks, Autocad

(more…)

Cocktail Bar Brera Milan in Italy by SBG architetti

Thursday, October 26th, 2017

Article source: SBG architetti

Damascegliere is a restaurant and cocktail bar in the heart of the Brera district in Milan. The conversion, in a two-floor brick vaulted warehouse-type building, has large windows overlooking the now glamourous Corso Garibaldi. The design concept for the restaurant is built around two long counters where clients can sit facing either the barman or the chef at work. The outdoor table has the same peninsula-shaped counter giving a continuity between the two spaces. On warm days the arched window opens up to make the inside of the restaurant completely accessible from the pedestrian road. The kitchen is partially visible through semitransparent glass. New services have been installed leaving the brick vaults untouched; a sophisticated air circulation system provides the possibility of keeping different functions such as the bar and kitchen in the same environment as the main seating area. In the basement the absence of windows and natural light is compensated by luminous shelves and mirrors over a continous padded bench.

Image Courtesy © SBG architetti

  • Architects: SBG architetti
  • Project: Cocktail Bar Brera Milan
  • Location: Milan, Italy
  • Software used: Autodesk, Autocad

(more…)

Wine Country Farmhouse in Calistoga, California by Bohlin Cywinski Jackson

Wednesday, October 25th, 2017

Article source: Bohlin Cywinski Jackson

Project Narrative

Located in Calistoga, a small town in Northern California’s Napa Valley, this renovated farmhouse is placed gently into a landscape of grape vines and matured walnut trees. The clients, local winemakers, desired a modern dwelling that would complement the small estate while working within the structure of the former residence. With the home’s new design, the relationship to site and ambiguity of the plan are simplified through the subtle shifting of openings and partitions, and the addition of key unifying elements.

Image Courtesy © Nic Lehoux

  • Architects: Bohlin Cywinski Jackson
  • Project: Wine Country Farmhouse
  • Location: Calistoga, California, USA
  • Photography: Matthew Millman, Nic Lehoux
  • Software used: Revit, 3D renderings
  • Design Principal: Gregory Mottola, FAIA
  • Project Manager: Aaron Gomez, AIA
  • Project Architect: Shawn Wood, RA
  • Size: 4,430 SF

(more…)

Asahi Kindergarten Phase I & Phase II in Tohoku, Japan by TEZUKA ARCHITECTS

Tuesday, October 24th, 2017

Article source: TEZUKA ARCHITECTS

Asahi Kindergarten Phase I

The original Asahi Kindergarten was lost in the Tohoku earthquake on 11 March 2011. Tezuka Architects, funded by Japan Committee for UNICEF, designed and reconstructed the Asahi Kindergarten on a highland area by using the huge trees that killed by the salt water of 2011 tsunami. These trees have meaningful symbols for the local villagers as they were planted along the approach to Daioji Temple, the main temple on the hill which its height is just enough to elude tsunamis in the long history. Many villagers survived because the priest of the temple used to teach them to escape to the temple.

Image Courtesy © TEZUKA ARCHITECTS

  • Architects: TEZUKA ARCHITECTS
  • Project: Asahi Kindergarten Phase I & Phase II
  • Location: Minamisanriku, Miyagi Prefecture, Tohoku, Japan
  • Software used: Autocad
  • Client: Phase IUNICEF
  • Lead Architects: Takaharu + Yui Tezuka
  • Design Team: Ryuya Maio, Shigefumi Araki, Takahiro Kitamura, Takehiro Ota
  • Constructor: CHUTO
  • Structural Engineer: TIS & PARTNER
    (more…)

34 Dwellings, Nursery And Emergency Shelter in Paris, France by MUOTO Architectes

Tuesday, October 24th, 2017

Article source: MUOTO Architectes 

The project responds to the challenge of combining three different programs along Rue Stendhal in Paris : social housing, nursery and emergency centre. The organization of the building allows all three programs to coexist peacefully and take advantage of the unique features of the site such as: privacy, natural lighting in the nursery, independence, and large exterior spaces for the dwellings. The emergency shelter is arranged to be compact and provides multiple views and orientations. Sitting on a hill, the building stands in dialogue with the large horizon of the East Paris landscape. Its volumes are designed to maximize energy efficiency and user comfort. The courtyard, balconies and dwellings are oriented to achieve the best sun angles all year round. Each volume preserves distant views to neighbouring condominiums, and aims to blend cohesively into the skyline of the neighbourhood and eastern Paris. The inward facing elevation opens up to the linear garden at the rear of the building which brings light and fresh air into the dwellings and the nursery.

Image Courtesy © Maxime Delvaux

  • Architects: MUOTO Architectes 
  • Project: 34 Dwellings, Nursery And Emergency Shelter
  • Location: Paris, France
  • Photography: Maxime Delvaux
  • Software used: Autocad, Rhinoceros, Adobe
  • Client: RIVP
  • Consultants: Fabrice Bougon, Bollinger & Grohmann, Espace-Temps, Nobatek
  • Certifications: Bbc rt 2012, pLAN CLIMAT VILLE DE PARIS
  • Budget: 11 000 000 €
  • Surface area: 5 180 sqm
  • Year: Competition 2009, completion 2017

(more…)

La Barquière in Marseille, France by Pietri Architectes

Tuesday, October 24th, 2017

Article source: v2com

La Barquière is a 62-housing project located in the 9th district of Marseille (France). The urban neighbourhood offers to the project a unique setting. Drawn in keeping with its context, this project respects all the family owner wishes. The owner wanted to keep the old building dated from the 18th century. The existing old building and the wooded environment proximity forced the project to become part of a complex height.

Image Courtesy © Mathieu Ducros

  • Architects: Pietri Architectes
  • Project: La Barquière
  • Location: Marseille, France
  • Photography: Mathieu Ducros, Nicolas Vaccaro
  • Software used: Autocad, SketchUp

(more…)

E+S House in Louveira, Brazil by Aresto Arquitetura

Monday, October 23rd, 2017

Article source: Aresto Arquitetura

The single storey house of 294 m² is designed for a couple with adult sons who visit their parents frequently.

With an \”L\” shaped plan, the main goals of the project were to make a home accessible, easy to maintain and simple to build.

  • Architects: Aresto Arquitetura
  • Project: E+S House
  • Location: Louveira, Brazil
  • Software used: Autocad, SketchUp, Revit

(more…)

Stones Gambling Hall in Citrus Heights, California by CCS ARCHITECTURE

Sunday, October 22nd, 2017

Article source: CCS ARCHITECTURE

Stones is a 25,450 square foot gambling hall, restaurant, and bar – in essence a boutique casino.  The building is an expansion and total renovation of a former Salvation Army warehouse that had been vacant for years, and is the first project of this kind to combine and relocate two existing card room licenses under one roof. Citrus Heights is a small city sixteen miles east of Sacramento – within California’s Central Valley.

Image Courtesy © Paul Dyer

  • Architects: CCS ARCHITECTURE
  • Project: Stones Gambling Hall
  • Location: 6508/6510 Antelope Road in the Antelope Crossing Shopping District, Citrus Heights, CA 95621, USA
  • Photography: Paul Dyer
  • Software used: Autocad, SketchUp, Rhino
  • Owner: The Monarch Group
  • Design Principal: Cass Calder Smith
  • Project Architect: Andre Krause
  • Interior Design Director: Barbara Turpin-Vickroy
  • Project Manager: Bryan Southwick
  • Designers: Eric Olson, Nathan Reed
  • Structural Engineer: Yadegar Associates, San Francisco CA

(more…)




© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise